#ifndef PROELEMIDH
#define PROELEMIDH
typedef int ProElemId;
#define PRO_E_SECTION 1
/* 2 is not used */
#define PRO_E_EXT_DEPTH 3
#define PRO_E_THICKNESS 4
#define PRO_E_MATRLSIDE 5
#define PRO_E_REV_ANGLE 6
#define PRO_E_ATTRIBUTES 7
#define PRO_E_DIRECTION 8
#define PRO_E_BLN_TANGENCY 9
#define PRO_E_QUILT 10
#define PRO_E_TRIM_QUILT 11
#define PRO_E_TRAJECTORY 12
#define PRO_E_PIVOT_DIR 13
#define PRO_E_XVEC_TRAJ 14
#define PRO_E_OPT_TRAJ 15
#define PRO_E_AREA_GRAPH 16
#define PRO_E_HSWP_PITCH 17
#define PRO_E_SECTOSRF_SRFS 18
#define PRO_E_SRFTOSRF_SRF1 19
#define PRO_E_SRFTOSRF_SRF2 20
#define PRO_E_IMP_BLN_CSYS 21
#define PRO_E_IMP_BLN_SEC 22
#define PRO_E_IMP_SEC_FLIP 23
#define PRO_E_SRF_OFFS_SRF 24
#define PRO_E_SRF_OFFS_OFFSET 25
#define PRO_E_SRF_COPY_SRFS 26
#define PRO_E_PATTERN 27
#define PRO_E_BLEND_DEPTH 28
#define PRO_E_SIL_TRM_PLANE 29
#define PRO_E_SIL_TRM_SIDE 30
#define PRO_E_INT_PARTS 31
#define PRO_E_BLEND_ITEMS 32
#define PRO_E_CONIC_PARAM 33
#define PRO_E_CTRL_POINT 34
#define PRO_E_TANGENCY 35
#define PRO_E_SMOOTHNESS 36
#define PRO_E_NUM_U_PATCH 37
#define PRO_E_NUM_V_PATCH 38
#define PRO_E_BOUNDARIES 39
#define PRO_E_CRV_DRFT_REF_DIR 40
#define PRO_E_DRFT_SRFS 41
#define PRO_E_DRFT_NEUT_CRV1 42
#define PRO_E_DRFT_NEUT_CRV2 43
#define PRO_E_DRFT_PARTING_SRF 44
#define PRO_E_DRFT_SIDE 45
#define PRO_E_CRV_DRFT_PNTS 46
#define PRO_E_CRV_DRFT_ANGLES 47
#define PRO_E_DRFT_NEUT_PLN 48
#define PRO_E_DRFT_DIR 49
#define PRO_E_PLN_DRFT_REF_DIR 50
#define PRO_E_DRFT_SECTION 51
#define PRO_E_PLN_DRFT_PNTS 52
#define PRO_E_PLN_DRFT_ANGLES 53
/* 54 not used */
/* PRO_E_ for free form */
#define PRO_E_FFRM_BASE_SRF 55
#define PRO_E_FFRM_GRID 56
#define PRO_E_FFRM_MANIPULATE 57
/* 58 not used */
/* PRO_E_ for trim by curve surface */
#define PRO_E_CRV_TRIM_QLT 59
#define PRO_E_CRV_TRIM_CRV 60
#define PRO_E_CRV_TRIM_DIR 61
/* 62 not used */
/* PRO_E_ for trim by fillet surface */
#define PRO_E_FILLET_TRIM_VERT 63
#define PRO_E_FILLET_TRIM_RADIUS 64
/* 65 not used */
/* PRO_E_ for edge chamfers */
#define PRO_E_EDGE_CHAMF_SCHEME 66
#define PRO_E_EDGE_CHAMF_SRF 67
#define PRO_E_EDGE_CHAMF_EDGES 68
/* 69 not used */
/* PRO_E_ for corner chamfers */
#define PRO_E_CORNER_CHAMF_CORNER 70
#define PRO_E_CORNER_CHAMF_DIMS 71
/* 72 not used */
/* PRO_E_ for shell */
#define PRO_E_SHELL_SRF 73
#define PRO_E_SHELL_THICK 74
#define PRO_E_SHELL_SPEC_THICK 75
/* PRO_E_ for spring back */
#define PRO_E_CRV_EDGE_CHAIN 76
#define PRO_E_SPRGBK_DIR 77
#define PRO_E_SPRGBK_SIDE 78
/* PRO_E_ for hole and shaft */
#define PRO_E_PLACETYPE 79
#define PRO_E_PLACEREFS 80
#define PRO_E_SIDES 81
#define PRO_E_DIAMETER 82
/* UIE_ for trim line */
#define PRO_E_TMLN_MAP_QLT 83
#define PRO_E_TMLN_DIE_QLT 84
#define PRO_E_TMLN_HINGE_CRV 85
#define PRO_E_TMLN_MAP_CRV 86
#define PRO_E_TMLN_EXPRESSION 87
#define PRO_E_TMLN_MATERL_THK 88
#define PRO_E_TMLN_MATERL_SIDE 89
#define PRO_E_TMLN_SPINE_CRV 90
#define PRO_E_TMLN_DIRECTION 91
#define PRO_E_TMLN_RND_FACTOR 92
/* Round */
#define PRO_E_ROUND_TYPE 93
#define PRO_E_ROUND_SETS 94
#define PRO_E_RNDSET_ATTR 95
#define PRO_E_RNDSET_REFS 96
#define PRO_E_RNDSET_SPINE 97
#define PRO_E_RNDSET_RAD_PNTS 98
#define PRO_E_RNDSET_RAD_VAL 99
#define PRO_E_RND_TRANSITIONS 100
#define PRO_E_RND_ATTACH_TYPE 101
/* PRO_E_ for cosmetic thread */
#define PRO_E_THREAD_SURF 102
#define PRO_E_THRD_STRT_SRF 103
#define PRO_E_NOTE_PARAMS 104
/* PRO_E_ for surf copy */
#define PRO_E_SRF_COPY_EXCL 106
#define PRO_E_SRF_COPY_FILL 107
/* PRO_E_ for Draft Offset */
#define PRO_E_DFT_OFFSET_SRFS 108
#define PRO_E_PROFILE_TYPE 109
#define PRO_E_OFFSET_VALUE 110
#define PRO_E_BEVEL_ANGLE 111
#define PRO_E_MIN_ANGLE 112
#define PRO_E_PULL_DIR 113
/* for surf offset and use quilt--thin */
#define PRO_E_SRF_LEAVE_OUT 115
#define PRO_E_SRF_LIMIT_SRF 116
#define PRO_E_CUT_DEF 150
#define PRO_E_FEAT_NAME 151
#define PRO_E_COMMENTS 152
#define PRO_E_TOOL 153
#define PRO_E_PARAMS 154
#define PRO_E_CSYS 155
#define PRO_E_RETRACT 156
#define PRO_E_VOLUME 157
#define PRO_E_SURFACES 158
#define PRO_E_4AXIS_PLANE 159
#define PRO_E_CUTLINE_SURFS 160
#define PRO_E_EXCLUDE_SURFS 161
#define PRO_E_TOP_SURFS 162
#define PRO_E_APPR_WALLS 163
#define PRO_E_THREAD_CYL 164
#define PRO_E_START_POINT 165
#define PRO_E_START_CUTLINE 166
#define PRO_E_END_CUTLINE 167
#define PRO_E_INNER_CUTLINE 168
#define PRO_E_SYNCHRONIZE 169
#define PRO_E_CUT_DIRECTION 170
#define PRO_E_BNDRY_CONTRS 171
#define PRO_E_ORDER 172
#define PRO_E_AXIS_DEFN 173
#define PRO_E_CHECK_SURFS 174
#define PRO_E_REF_GROOVE 175
#define PRO_E_REF_SEQ 176
#define PRO_E_CORNER_EDGES 177
#define PRO_E_STOCK_BOUND 178
#define PRO_E_AREA 179
#define PRO_E_MFG_TRAJECTORY 180
#define PRO_E_CORNERS 181
#define PRO_E_THREAD 182
#define PRO_E_HOLES 183
#define PRO_E_END_PLANE 184
#define PRO_E_XY_PLANE 185
#define PRO_E_UV_PLANE 186
#define PRO_E_START 187
#define PRO_E_END 188
#define PRO_E_SYNC_HEAD1 189
#define PRO_E_WCELL 190
#define PRO_E_MACH_CSYS 191
#define PRO_E_FROM_PNT 192
#define PRO_E_HOME_PNT 193
#define PRO_E_INTER_CUT 194
#define PRO_E_CUT_ENDS 195
#define PRO_E_CUT_CORNERS 196
#define PRO_E_SHAKEAWAY 197
#define PRO_E_BUILD_CUT 198
#define PRO_E_CUT_TO_DEPTH 199
#define PRO_E_CUT_FROM_DEPTH 200
#define PRO_E_CUT_PLANE 201
#define PRO_E_BUILD_SLICE 202
#define PRO_E_BUILD_PASS 203
#define PRO_E_TOOLING 204
#define PRO_E_WCELL_TOOL 205
#define PRO_E_TOOL_TABLE 206
#define PRO_E_TURRET 207
#define PRO_E_OPERATION 208
#define PRO_E_CUTLIN_DEF 209
#define PRO_E_ENDS 210
#define PRO_E_SCALLOP_SRFS 211
#define PRO_E_FIXTURE 212
#define PRO_E_GATHER_SELECT 213
#define PRO_E_GATHER_EXCLUDE 214
#define PRO_E_GATHER_FILL 215
#define PRO_E_GATHER_CLOSE 216
#define PRO_E_TAPER_ANGLE 217
#define PRO_E_NC_BUILD_CUT 218
#define PRO_E_GEOM_REFS 219
#define PRO_E_POINTS 220
#define PRO_E_PATH 221
#define PRO_E_CMM_FEAT_NAME 222
#define PRO_E_CMM_CON_TYPE 223
#define PRO_E_CMM_CON_FEATS 224
#define PRO_E_CMM_VER_TOL 225
#define PRO_E_CMM_VER_DATUMS 226
#define PRO_E_CMM_VER_FEATS 227
#define PRO_E_SPLIT_SRFS 228
#define PRO_E_SPLIT_CLASSIFY 229
/* sheet metal */
#define PRO_E_STEP_SECTION 230
#define PRO_E_STEP_SURFACE 231
#define PRO_E_STEP_EDGE 232
#define PRO_E_STEP_BEND_TBL 233
#define PRO_E_STEP_RADIUS_TYPE 234
#define PRO_E_STEP_ATTACH_EDGE 235
#define PRO_E_STEP_WALL_ANGLE 236
#define PRO_E_STEP_START_POINT 237
#define PRO_E_STEP_SKETCH 238
#define PRO_E_STEP_RELIEF 239
#define PRO_E_STEP_WALL_TRANS_AREAS 240
#define PRO_E_STEP_BEND_ANGLE 241
#define PRO_E_STEP_RADIUS_VAL 242
#define PRO_E_STEP_EXTR_DEPTH 243
#define PRO_E_STEP_PL_BND_SIDE 244
#define PRO_E_STEP_REF_SURFACE 245
#define PRO_E_STEP_WALL_TRAJ 246
#define PRO_E_STEP_FIXED_GEOM 247
#define PRO_E_STEP_UNBND_GEOM 248
#define PRO_E_STEP_FIXED_EDGE 249
#define PRO_E_STEP_XSECT_CURV 250
#define PRO_E_STEP_FIXED_SIDE 251
#define PRO_E_STEP_TRANS_AREA 252
#define PRO_E_STEP_TRANS_DEF 253
#define PRO_E_STEP_BB_FIXED_GEOM 254
#define PRO_E_STEP_BENDBACK_GEOM 255
#define PRO_E_STEP_EXTEND_WALL_EDGE 256
#define PRO_E_STEP_EXTEND_WALL_DIST 257
#define PRO_E_STEP_TWIST_ATTACH_EDGE 258
#define PRO_E_STEP_TWIST_AXIS 259
#define PRO_E_STEP_START_WIDTH 260
#define PRO_E_STEP_END_WIDTH 261
#define PRO_E_STEP_WALL_LENGTH 262
#define PRO_E_STEP_TWIST_ANGLE 263
#define PRO_E_STEP_DEVEL_LENGTH 264
#define PRO_E_STEP_BENDBACK_FIXED_GEOM 265
#define PRO_E_STEP_BENDBACK_BB_GEOM 266
#define PRO_E_STEP_EXL_SURF 267
#define PRO_E_DIM_TYPE 268
#define PRO_E_STEP_BREAK_PNT 269
#define PRO_E_STEP_EDGE_RIP 270
#define PRO_E_STEP_RIP_CONN 271
#define PRO_E_STEP_EDGE_BEND 272
/* cav fit features */
#define PRO_E_FIT_NAME 273
#define PRO_E_FIT_SC_SET 274
#define PRO_E_FIT_SURF 275
#define PRO_E_STEP_SEP_BENDS 276
#define PRO_E_STEP_DRVSRF 277
/* constants for process step */
#define PRO_E_COMPONENTS 278
#define PRO_E_DESCRIPTION 279
#define PRO_E_SIMPLFD_REP 280
#define PRO_E_EXPLODE_STATE 281
#define PRO_E_POSITION 282
#define PRO_E_GEN_STEP_TYPE 283
#define PRO_E_GEN_STEP_REFS 284
#define PRO_E_TIME_ESTIMATE 285
#define PRO_E_COST_ESTIMATE 286
#define PRO_E_PLACMNT_PLANE 287
#define PRO_E_CNTRBR 288
#define PRO_E_SCANSET_FILE 289
#define PRO_E_SCANSET_UNITS 290
#define PRO_E_TAN_DFT_DRAFT_LINE 291
#define PRO_E_TAN_DFT_PULL_DIR 292
#define PRO_E_TAN_DFT_TOP_REF_SURF 293
#define PRO_E_TAN_DFT_BTM_REF_SURF 294
#define PRO_E_TAN_DFT_REF_SURF 295
#define PRO_E_TAN_DFT_TERM_REF_SURFS 296
#define PRO_E_TAN_DFT_DRAFT_SIDE 297
#define PRO_E_CRV_GET_CSYS 298
#define PRO_E_CRV_GET_CSYS_TYPE 299
#define PRO_E_CRV_ENTER_EQUATION 300
#define PRO_E_CRV_PNTS 301
#define PRO_E_CRV_TANG 302
#define PRO_E_CRV_SILH_NAME 303
#define PRO_E_CRV_SILH_SEL_SURF 304
#define PRO_E_CRV_SILH_DIRECTION 305
#define PRO_E_CRV_DL_AUTO_FIRST_REF_CURVE 306
#define PRO_E_CRV_DL_AUTO_SECOND_REF_CURVE 307
#define PRO_E_CRV_DL_AUTO_OUTSIDE_DIR 308
#define PRO_E_CRV_DL_AUTO_RAD_OF_CRV 309
#define PRO_E_CRV_DFT_DFT_ANGLE 310
#define PRO_E_CRV_DFT_DFT_SEL_SURF 311
#define PRO_E_CRV_DFT_DFT_FLIP 312
#define PRO_E_CRV_DL_EXCLUDE_REF_CURVES 313
#define PRO_E_PROJ_CRV_CURVE 314
#define PRO_E_PROJ_CRV_SURFS 315
#define PRO_E_PROJ_CRV_DIR 316
#define PRO_E_CRV_DL_SPLIT_CRV 317
#define PRO_E_CRV_DL_SPLIT_DIVIDER 318
#define PRO_E_CRV_DL_SPLIT_FLIP 319
/* cav deviation features */
#define PRO_E_DEV_NAME 320
#define PRO_E_DEV_REF_FIT 321
#define PRO_E_DEV_TYPE 322
#define PRO_E_DEV_SURF 323
#define PRO_E_POINTS_N_PATH 324
#define PRO_E_CMM_REFCSYS_TRF 325
#define PRO_E_CMM_REFCSYS_TRF_REF 326
#define PRO_E_CMM_REFCSYS_NAME 327
#define PRO_E_CMM_REFCSYS_CSYS 328
#define PRO_E_STEP_SEL_FORM 329
#define PRO_E_STEP_TREAT_EDGE 330
#define PRO_E_TOOL_MODEL 331
#define PRO_E_FIXT_COMPONENTS 332
#define PRO_E_SETUP_TIME 333
#define PRO_E_MACH_WINDOW 334
#define PRO_E_MACH_DEPTH 335
#define PRO_E_MACH_PLANE 336
#define PRO_E_WIND_CSYS 337
#define PRO_E_TURN_PROF 338
#define PRO_E_CMM_COMMENTS 339
#define PRO_E_CRV_PNTS_TWEAK 340
#define PRO_E_BLEND_CONTROL 341
#define PRO_E_GRV_EDGES 342
#define PRO_E_GRV_OFFSET 343
#define PRO_E_GRV_NORM_SURF 344
#define PRO_E_CMM_SAVE 345
#define PRO_E_FIT_SUPPR_PNTS 346
#define PRO_E_TOOL_SIDE 347
#define PRO_E_RNDSET_EXTENT 348
#define PRO_E_CMM_CLR_PLANE 349
#define PRO_E_REF_SITES 350
#define PRO_E_STEP_MERGE_REF 351
#define PRO_E_STEP_MERGE_GEOM 352
#define PRO_E_STEP_MERGE_EDGE 353
#define PRO_E_STEP_MERGE_LINES 354
#define PRO_E_GEN_FEAT_NAME 355
#define PRO_E_LOC_MACH_SURFS 356
#define PRO_E_PREV_TOOL 357
#define PRO_E_FFRM_BASE_SRFS 358
#define PRO_E_CRV_EDGE_MULT_CHAIN 359
#define PRO_E_GCPY_OBJS 361
#define PRO_E_GCPY_CLIP 362
/* ***** Patterns ***** */
#define PRO_E_PAT_TYPE 363
#define PRO_E_PAT_REF 364
#define PRO_E_PAT_REGEN_METHOD 365
#define PRO_E_PAT_FIRST_DIR 366
#define PRO_E_PAT_SECOND_DIR 367
#define PRO_E_PAT_TABLE_DIMS 368
#define PRO_E_PAT_TABLE_LIST 369
#define PRO_E_PAT_TABLE_NAME 370
#define PRO_E_PAT_DIR_LIST 371
#define PRO_E_PAT_DIR_LIST_ELEM 372
#define PRO_E_PAT_DIR_SHOW_DIMS 373
#define PRO_E_PAT_DIR_SWITCH_DIMS 374
#define PRO_E_PAT_FIRST_DIR_NUM_INST 375
#define PRO_E_PAT_SECOND_DIR_NUM_INST 376
#define PRO_E_PAT_DIR_DIMENSION 377
#define PRO_E_PAT_DIR_VAR_TYPE 378
#define PRO_E_PAT_DIR_VAR_VALUE 379
#define PRO_E_PAT_RELATION_EDIT 380
#define PRO_E_PAT_TABLE_EDIT 382
#define PRO_E_PAT_TABLE_SET_ACTIVE 383
#define PRO_E_PAT_TABLE_WRITE 384
#define PRO_E_PAT_TABLE_READ 385
/* *** End Patterns *** */
#define PRO_E_FEATURE_TREE 386
#define PRO_E_FEATURE_TYPE 387
#define PRO_E_FEATURE_FORM 388
#define PRO_E_ATTR_DTMCRV_SKET 389
#define PRO_E_ATTR_DTMCRV_COMP 390
#define PRO_E_ATTR_DFTOFF_DIR 391
#define PRO_E_ATTR_DFTOFF_TRANS 392
#define PRO_E_ATTR_HLCSWP_PITCH 393
#define PRO_E_ATTR_HLCSWP_ORIENT 394
#define PRO_E_ATTR_HLCSWP_DIR 395
#define PRO_E_ATTR_SPRGBK_SPLIT 396
#define PRO_E_ATTR_SPRGBK_ANGLE 397
#define PRO_E_ATTR_ALLBLND_CONN 398
#define PRO_E_ATTR_ROTBLND_SHAPE 399
#define PRO_E_SHADOW_CRV_PARTS 400
#define PRO_E_SHADOW_WRK_SEL 401
#define PRO_E_SHADOW_CRV_DIR 402
#define PRO_E_SHADOW_CLP_PLN 403
#define PRO_E_SHADOW_SHUT_EXT 404
#define PRO_E_SHADOW_SHUT_PLANE 405
#define PRO_E_SHADOW_DRFT_ANG 406
#define PRO_E_SHADOW_LOOP_CLS 407
/* Datum Plane */
#define PRO_E_DTMPLN_CONSTRAINTS 410
#define PRO_E_DTMPLN_CONSTRAINT 411
#define PRO_E_DTMPLN_CONSTR_TYPE 412
#define PRO_E_DTMPLN_CONSTR_REF 413
#define PRO_E_DTMPLN_CONSTR_REF_OFFSET 414
#define PRO_E_DTMPLN_CONSTR_REF_ANGLE 415
#define PRO_E_DTMPLN_SEC_IND 416
#define PRO_E_DTMPLN_OFF_CSYS 417
#define PRO_E_DTMPLN_OFF_CSYS_OFFSET 418
#define PRO_E_DTMPLN_FIT 419
#define PRO_E_DTMPLN_FIT_TYPE 420
#define PRO_E_DTMPLN_FIT_REF 421
#define PRO_E_DTMPLN_FIT_DTM_RAD 422
#define PRO_E_GEN_SEL_DIR_DRAFT 423
#define PRO_E_DIR_REF 424
#define PRO_E_CSYS_AXIS 425
#define PRO_E_GEN_DIR_FLIP 426
#define PRO_E_DIR_PNT 427
#define PRO_E_EXT_DEPTH_FROM 428
#define PRO_E_EXT_DEPTH_TO 429
#define PRO_E_EXT_DEPTH_FROM_TYPE 430
#define PRO_E_EXT_DEPTH_FROM_VALUE 431
#define PRO_E_EXT_DEPTH_FROM_REF 432
#define PRO_E_EXT_DEPTH_TO_TYPE 433
#define PRO_E_EXT_DEPTH_TO_VALUE 434
#define PRO_E_EXT_DEPTH_TO_REF 435
#define PRO_E_STD_DIRECTION 436
#define PRO_E_REV_ANGLE_FROM 437
#define PRO_E_REV_ANGLE_TO 438
#define PRO_E_REV_ANGLE_FROM_TYPE 439
#define PRO_E_REV_ANGLE_TO_TYPE 440
#define PRO_E_REV_ANGLE_FROM_VAL 441
#define PRO_E_REV_ANGLE_TO_VAL 442
#define PRO_E_REV_ANGLE_FROM_REF 443
#define PRO_E_REV_ANGLE_TO_REF 444
/* 445, 446 NOT used */
#define PRO_E_STD_SECTION 447
#define PRO_E_STD_SECTION_PLANE 448
#define PRO_E_STD_SEC_PLANE_USE_PREV 449
#define PRO_E_STD_SEC_SETUP_PLANE 450
#define PRO_E_STD_SEC_PLANE 451
#define PRO_E_STD_SEC_PLANE_VIEW_DIR 452
#define PRO_E_STD_SEC_PLANE_SKET_ORIENT 453
#define PRO_E_STD_SEC_PLANE_ORIENT_DIR 454
#define PRO_E_STD_SEC_PLANE_ORIENT_REF 455
#define PRO_E_STD_SEC_PLANE_CSYS_AXIS 456
#define PRO_E_STD_SEC_PLANE_ORIENT_FLIP 457
#define PRO_E_SKETCHER 458
#define PRO_E_BNBLN_TAN_COND 459
#define PRO_E_BNBLN_TNC_BNDRY 460
#define PRO_E_BNBLN_TAN_COND_TYPE 461
#define PRO_E_BNBLN_TAN_REF_TYPE 462
#define PRO_E_BNBLN_TNC_SEL_BNDRY 463
#define PRO_E_BNBLN_TNC_SEL_ENTITY 464
#define PRO_E_BNBLN_TAN_REF_SEL 465
#define PRO_E_BNBLN_TAN_FLD 466
#define PRO_E_BNBLN_TNFLD_BNDRY 467
#define PRO_E_BNBLN_TAN_FLD_TYPE 468
#define PRO_E_BNBLN_ADVANCED 469
#define PRO_E_BNBLN_ADV_BNDRY 470
#define PRO_E_BNBLN_ADV_VIA_CRV 471
#define PRO_E_BNBLN_ADV_INN_EDGS 472
#define PRO_E_BNBLN_ADV_GHST_2DIR 473
#define PRO_E_BNBLN_STRETCH 474
#define PRO_E_NPCH_CURVES 475
#define PRO_E_NPCH_CRV_BNDRY 476
#define PRO_E_NPCH_CRV_REF 477
#define PRO_E_SWAP_SIDE 478
#define PRO_E_GCPY_SURF_REFS 479
#define PRO_E_GCPY_EDGE_REFS 480
#define PRO_E_GCPY_CRV_REFS 481
/* Further Manufacturing elements */
#define PRO_E_NUM_AXES 482
#define PRO_E_WCELL_TYPE 483
#define PRO_E_NCSEQ_TYPE 484
#define PRO_E_LATHE_DIR 485
#define PRO_E_MACH_NUM_HEADS 486
#define PRO_E_MFG_PARAMS 487
#define PRO_E_MFG_PARAM 488
#define PRO_E_MFG_PARAM_NAME 489
#define PRO_E_MFG_PARAMVAL 490
#define PRO_E_TOOL_TABLES 491
#define PRO_E_MACH_HEAD 492
#define PRO_E_MFG_TABLE 493
#define PRO_E_MFG_TABLE_ROW 494
#define PRO_E_MFG_TABLE_CELL 495
#define PRO_E_MFG_TABLE_CELL_TYPE 496
#define PRO_E_MFG_TABLE_CELL_VALUE 497
#define PRO_E_SITE_NAMES 498
#define PRO_E_STD_MATRLSIDE 499
#define PRO_E_MACH_HEAD1 500
#define PRO_E_MACH_HEAD2 501
#define PRO_E_FROM_POINTS 502
#define PRO_E_FROM_POINT 503
#define PRO_E_HOME_POINTS 504
#define PRO_E_HOME_POINT 505
#define PRO_E_POINT_SEL 506
#define PRO_E_HOLEMAKING_TYPE 507
#define PRO_E_HOLE_CYCLE_TYPE 508
#define PRO_E_PECK_TYPE 509
#define PRO_E_MFG_TOOL_TABLE 510
#define PRO_E_CURVE_TYPE 511
#define PRO_E_BNBLN_ADV_INN_EDGS1 512
#define PRO_E_BNBLN_ADV_INN_EDGS2 513
/* sides and depth for standard elements */
#define PRO_E_STD_SIDES 514
#define PRO_E_STD_EXT_DEPTH 515
#define PRO_E_ATTR_SRF_END_COND 516
#define PRO_E_CLOSE_HOLES 517
#define PRO_E_PROJ_CRV_PROJ_TYPE 518
/* Odui Object Id. Use this number for root specification */
#define PRO_E_ODUI_OBJECT_TREE 519
/* turning stock allow */
#define PRO_E_TURN_STKLW 520
#define PRO_E_TWIST_AXIS_SEL 521
#define PRO_E_TWIST_AXIS_TYPE 522
#define PRO_E_TWIST_AXIS_CR 523
#define PRO_E_TWIST_AXIS_VAL 524
#define PRO_E_TWIST_AXIS_OFF_TYPE 525
#define PRO_E_EDGE_RIP_LIST 526
#define PRO_E_RIP_CONN_LIST 527
#define PRO_E_EDGE_BEND_LIST 528
#define PRO_E_SELECT_RIP_EDGE 529
#define PRO_E_SELECT_BEND_EDGE 530
#define PRO_E_CORNER_TYPE 531
#define PRO_E_CORNER_OVER_TYPE 532
#define PRO_E_CORNER_FLIP 533
#define PRO_E_FIRST_END 534
#define PRO_E_SECON_END 535
#define PRO_E_BEND_RADIUS 536
#define PRO_E_BEND_TBL_TYPE 537
#define PRO_E_BEND_TBL_SELECT 538
#define PRO_E_ENTER_RADIUS_VALUE 539
#define PRO_E_RADIUS_FROM_TABLE 540
#define PRO_E_Z_TRAJECTORY 541
#define PRO_E_MINOR_DIAMETER 542
#define PRO_E_THREAD_SURFACES 543
#define PRO_E_THREAD_SURF_NEW 544
#define PRO_E_THRD_STRT_SRF_NEW 545
#define PRO_E_THREAD_PARAMS 546
#define PRO_E_THREAD_PITCH 547
#define PRO_E_THREAD_PITCH_UNITS 548
#define PRO_E_THREAD_NUM_STARTS 549
#define PRO_E_THREAD_FORM 550
#define PRO_E_THREAD_CLASS 551
#define PRO_E_THREAD_PLACEMENT 552
#define PRO_E_THREAD_MSYS 553
/* New Rel 19.0 shell elements */
#define PRO_E_ST_SHELL_SRF 554
#define PRO_E_ST_SHELL_THICK 555
#define PRO_E_ST_SHELL_LOCL_LIST 556
#define PRO_E_ST_SHELL_SPEC_SRF 557
#define PRO_E_ST_SHELL_SPEC_THCK 558
/* New pattern ODUI elements. */
#define PRO_E_PAT_DIR_DIM_COMPOUND 559
#define PRO_E_PAT_TABLE 560
/* WaterLines elements */
#define PRO_E_WTLN_COMP 561
#define PRO_E_WTLN_SK 562
#define PRO_E_WTLN_CONDS 563
#define PRO_E_WTLN_NAME 564
#define PRO_E_WTLN_TYPE 565
#define PRO_E_WTLN_DIAMETER 566
#define PRO_E_NCL_COMMAND 567
#define PRO_E_NCL_COMMANDS 568
#define PRO_E_REF_NCSEQ 569
/* Rel 19.0 parallel blend depth elems */
#define PRO_E_BLN_DPTH_ARR 570
#define PRO_E_BLN_DPTH_CMPD 571
#define PRO_E_BLN_DPTH_TYPE 572
#define PRO_E_BLN_DPTH_FROMTO 573
#define PRO_E_BLN_DPTH_FROMREF 574
#define PRO_E_BLN_DPTH_TOREF 575
#define PRO_E_BLN_DPTH_VAL 576
/* datum axis */
#define PRO_E_DTMAXIS_TYPE 577
#define PRO_E_DTMAXIS_REFS 578
#define PRO_E_DTMAXIS_PNTVTX1 579
#define PRO_E_DTMAXIS_PNTVTX2 580
#define PRO_E_DTMAXIS_PLANE1 581
#define PRO_E_DTMAXIS_PLANE2 582
#define PRO_E_DTMAXIS_EDGE_SRF_CSYS 583
#define PRO_E_DTMAXIS_CSYS_AXIS 584
#define PRO_E_DTMAXIS_CURVE_EDGE 585
#define PRO_E_DTMAXIS_PNTVTX 586
#define PRO_E_DTMAXIS_PLANE 587
#define PRO_E_DTMAXIS_DIM_REF1 588
#define PRO_E_DTMAXIS_DIM_REF_DIST1 589
#define PRO_E_DTMAXIS_DIM_REF2 590
#define PRO_E_DTMAXIS_DIM_REF_DIST2 591
#define PRO_E_DTMAXIS_PNT 592
#define PRO_E_DTMAXIS_SURF 593
/* New Rel 19.0 chamfer elements */
#define PRO_E_STD_EDGE_CHAMF_SCHEME 594
#define PRO_E_STD_EDGE_CHAMF_SRF 595
#define PRO_E_STD_EDGE_CHAMF_EDGES 596
#define PRO_E_STD_EDGE_CHAMF_DIM1 597
#define PRO_E_STD_EDGE_CHAMF_DIM2 598
#define PRO_E_STD_EDGE_CHAMF_ANGLE 599
#define PRO_E_STD_CORNER_CHAMF_CORNER 600
#define PRO_E_STD_CORNER_CHAMF_EDGE1 601
#define PRO_E_STD_CORNER_CHAMF_EDGE2 602
#define PRO_E_STD_CORNER_CHAMF_EDGE3 603
/* Pattern 19.0 root element */
#define PRO_E_PATTERN_ROOT 604
/*component assembly standard elements */
#define PRO_E_COMPONENT_CONSTRAINTS 605
#define PRO_E_COMPONENT_CONSTRAINT 606
#define PRO_E_COMPONENT_CONSTR_TYPE 607
#define PRO_E_COMPONENT_COMP_CONSTR_REF 608
#define PRO_E_COMPONENT_ASSEM_CONSTR_REF 609
#define PRO_E_COMPONENT_CONSTR_REF_OFFSET 610
#define PRO_E_COMPONENT_INIT_POS 611
#define PRO_E_COMPONENT_MODEL 612
#define PRO_E_PROCESS_STEP_TYPE 613
/* New CAV */
#define PRO_E_FIT_REF_FIT 614
/* More GeomCopy elements */
#define PRO_E_GCPY_CSYS_PLACE 615
#define PRO_E_GCPY_EXT_CSYS 616
#define PRO_E_GCPY_LOC_CSYS 617
#define PRO_E_GCPY_EXT_MDL 618
/* curves */
#define PRO_E_DTMCRV_DISPLAY_HATCH 619
#define PRO_E_DTMCRV_HATCH_DENSITY 620
#define PRO_E_CRV_TANG_OFFSET_CURVE 621
#define PRO_E_CRV_TANG_OFFSET_SURF 622
#define PRO_E_CRV_TANG_OFFSET_DIST 623
#define PRO_E_CRV_TANG_OFFSET_DIR 624
#define PRO_E_CRV_OFFSET_CURVE 625
#define PRO_E_CRV_OFFSET_START_PNT 626
#define PRO_E_CRV_OFFSET_SURFACE 627
#define PRO_E_CRV_OFFSET_DIRECTION 628
#define PRO_E_CRV_OFFSET_GRAPH 629
#define PRO_E_CRV_OFFSET_SCALE 630
#define PRO_E_STD_CRV_SPLIT_CRV 631
#define PRO_E_STD_CRV_SPLIT_DIVIDER 632
#define PRO_E_STD_CRV_SPLIT_SIDE 633
#define PRO_E_REV_ANGLE_FROM_LIMIT 634
#define PRO_E_REV_ANGLE_TO_LIMIT 635
#define PRO_E_OLD_EXT_DEPTH 636
#define PRO_E_ST_SHELL_LOCL_CMPD 637
/* Boundary blend elements */
#define PRO_E_CTRL_CURVE 638
#define PRO_E_CTRL_TYPE 639
#define PRO_E_REF_CURVE 640
#define PRO_E_CTRL_PTS_1DIR 641
#define PRO_E_CTRL_PTS_SET 642
#define PRO_E_CTRL_PTS_CURVE 643
#define PRO_E_CTRL_PTS_REF 644
#define PRO_E_CTRL_PTS_2DIR 645
#define PRO_E_BLEND_TYPE 646
#define PRO_E_CTRL_PTS_SETDUM 647
#define PRO_E_CTRL_PTS_CURVEDUM 647
#define PRO_E_REFERENCE_CURVES 649
#define PRO_E_CHAIN_CURVES 650
#define PRO_E_BNBLN_1DIR 651
#define PRO_E_BNBLN_2DIR 652
#define PRO_E_APPROX_DIR_CURVES 653
#define PRO_E_APPROX_CURVES 654
#define PRO_E_APPROX_PARAMETERS 655
#define PRO_E_APPROX_DIR 656
#define PRO_E_BNBLN_DIR_CURVES 657
#define PRO_E_CONIC_CURVES 658
#define PRO_E_CONIC_BNDRY1 659
#define PRO_E_CONIC_BNDRY2 660
#define PRO_E_BNBLN_CURVES 661
#define PRO_E_CTRL_PTS 662
#define PRO_E_APPROX_SMOOTHNESS 663
#define PRO_E_APPROX_NUM_U_PATCH 664
#define PRO_E_APPROX_NUM_V_PATCH 665
#define PRO_E_BNBLN_TAN_COND_19 666
#define PRO_E_BNBLN_TAN_FLD_19 667
#define PRO_E_BNBLN_TNC_SEL_BNDRY_19 668
#define PRO_E_BNBLN_TNC_BNDRY_19 669
#define PRO_E_BNBLN_TAN_COND_TYPE_19 670
#define PRO_E_BNBLN_TAN_REF_TYPE_19 671
#define PRO_E_BNBLN_TNC_SEL_ENTITY_19 672
#define PRO_E_BNBLN_TAN_REF_SEL_19 673
#define PRO_E_BNBLN_TNFLD_BNDRY_19 674
#define PRO_E_BNBLN_TAN_FLD_TYPE_19 675
#define PRO_E_TWIST_OFFSET_PLN 676
/* Analysis elements */
#define PRO_E_ANALYSIS_NAME 677
#define PRO_E_ANALYSIS_DEF 678
#define PRO_E_ANALYSIS_ORDER 679
#define PRO_E_ANALYSIS_REF 680
#define PRO_E_COMPONENT_MISC_ATTR 681
#define PRO_E_ANALYSIS_REG_REQUEST 682
#define PRO_E_HSWP_PITCH_DOUBLE 684
#define PRO_E_HSWP_PITCH_GRAPH 685
#define PRO_E_CONIC_PARAM_19 686
#define PRO_E_STD_DRAFT_SURFACES 687
#define PRO_E_STD_DRAFT_SPLIT_ATTR 688
#define PRO_E_STD_DRAFT_PIVOT_TYPE 689
#define PRO_E_STD_DRAFT_PIVOT_PLANE 690
#define PRO_E_STD_DRAFT_PIVOT_CURVE_1 691
#define PRO_E_STD_DRAFT_PIVOT_CURVE_2 692
#define PRO_E_STD_DRAFT_PARTING_SRF 693
/* New Hole elements */
#define PRO_E_HLE_OPTS 694
#define PRO_E_HLE_TYPE 695
#define PRO_E_HLE_PL_TYPE 696
#define PRO_E_HLE_PL_REFS 697
#define PRO_E_HLE_AXIS 698
#define PRO_E_HLE_EJ_PIN_PNTS 699
#define PRO_E_HLE_PL_PLANE 700
#define PRO_E_HLE_PL_SURF 701
#define PRO_E_HLE_REF_PLANE 702
#define PRO_E_HLE_REF_ANG 703
#define PRO_E_HLE_DIM_REF1 704
#define PRO_E_HLE_DIM_TYPE 705
#define PRO_E_HLE_DIM_DIST1 706
#define PRO_E_HLE_DIM_REF2 707
#define PRO_E_HLE_DIM_DIST2 708
#define PRO_E_HLE_DIM_DIA 709
#define PRO_E_HLE_DIM_RAD 710
#define PRO_E_HLE_DIM_LIN 711
#define PRO_E_HLE_NORM_PLA 712
#define PRO_E_HLE_NORM_OFFST 713
#define PRO_E_HLE_POINT 714
#define PRO_E_HLE_DIAMETER 715
#define PRO_E_HLE_CNTRBR 716
#define PRO_E_HLE_CNTRBR_DIA 717
#define PRO_E_HLE_CNTRBR_DEPTH 718
#define PRO_E_HLE_SKETCHER 719
/* For general sections */
#define PRO_E_STD_SECTIONS 721
#define PRO_E_STD_TRAJS 722
#define PRO_E_STD_TRAJ 723
#define PRO_E_STD_SEC_SETUP 724
#define PRO_E_STD_SEC_METHOD 725
#define PRO_E_STD_SEC_SELECT 726
#define PRO_E_STD_SEC_PLANE_LOC 727
#define PRO_E_STD_SEC_LOCATION 728
#define PRO_E_STD_SEC_ROTATION 729
#define PRO_E_STD_SEC_SEL_CHAIN 730
#define PRO_E_STD_SEC_TAN_SURFS 731
#define PRO_E_STD_SEC_BLN_VERTS 732
#define PRO_E_STD_SCHEME 733
/* New elements for Get Surface From Chain utility */
#define PRO_E_SURF_CHAIN_CMPND 734
#define PRO_E_SURF_CHAIN_METHOD 735
#define PRO_E_SURF_CHAIN_REF_SURFS 736
#define PRO_E_SURF_CHAIN_SURF 737
#define PRO_E_SURF_CHAIN_REF 738
/* Interchange elements */
#define PRO_E_INTCHG_SUBS_STEP 739
#define PRO_E_INTCHG_MP_STEP 740
#define PRO_E_INTCHG_PLACE_STEP 741
#define PRO_E_INTCHG_FUNC_NODE_STEP 742
#define PRO_E_INTCHG_COMP_STEP 743
#define PRO_E_INTCHG_MP_TYPE_STEP 744
#define PRO_E_INTCHG_MP_DRV_STEP 745
#define PRO_E_CHOOSE_SURFACES 746
#define PRO_E_DEFINE_CURVE 747
#define PRO_E_CHOOSE_EDGES 748
#define PRO_E_TRAJ_DIR 749
#define PRO_E_AXIS_DEF 750
#define PRO_E_HEIGHT 751
#define PRO_E_OFFSET 752
#define PRO_E_MATRL_SIDE 753
/**** Use Quilt 19.0 ****/
#define PRO_E_STD_USEQLT_QLT 754
#define PRO_E_STD_USEQLT_SIDE 755
#define PRO_E_STD_USEQLT_THK 756
#define PRO_E_SHADOW_SLIDES 757
#define PRO_E_STD_REPLACED_SURF 758
#define PRO_E_STD_REPLACEMENT_SURF 759
#define PRO_E_STD_KEEP_QUILT 760
#define PRO_E_STD_CRV_EDGE_CHAIN 761
#define PRO_E_STD_EDGE_CHAMF_DIM 762
/* another component element for each plin */
#define PRO_E_COMPONENT_USER_DATA 763
#define PRO_E_PROJ_BLN_DPTH 764
/* for plunge milling */
#define PRO_E_START_AXES 765
#define PRO_E_STD_PROJ_CRV_SURFS 766
#define PRO_E_STD_FORM_CRV_SURF 767
#define PRO_E_STD_FORM_CRV_TMP 768
#define PRO_E_STD_CRV_INTSRF_SURFS1 769
#define PRO_E_STD_CRV_INTSRF_SURFS2 770
#define PRO_E_CTRL_PTS_BNDRIES 771
/* Datum Points Elements */
#define PRO_E_DTMPNT_PNTS 772
#define PRO_E_DTMPNT_PNT 773
#define PRO_E_DTMPNT_TYPE 774
#define PRO_E_DTMPNT_DEPENDENCY 775
#define PRO_E_DTMPNT_PLACE_SURF 776
#define PRO_E_DTMPNT_DIM_REF1 777
#define PRO_E_DTMPNT_DIM_REF2 778
#define PRO_E_DTMPNT_DIM_DIST1 779
#define PRO_E_DTMPNT_DIM_DIST2 780
#define PRO_E_DTMPNT_OFFSET_DIST 781
#define PRO_E_DTMPNT_CXS_CURVE 782
#define PRO_E_DTMPNT_CXS_SURF 783
#define PRO_E_DTMPNT_ONV_VTX 784
#define PRO_E_DTMPNT_3SRF_SURF1 785
#define PRO_E_DTMPNT_3SRF_SURF2 786
#define PRO_E_DTMPNT_3SRF_SURF3 787
#define PRO_E_DTMPNT_ATCENT_REF 788
/* Csys */
#define PRO_E_CSYS_METHOD 789
#define PRO_E_CSYS_REFS 790
#define PRO_E_CSYS_PLANE1 791
#define PRO_E_CSYS_PLANE2 792
#define PRO_E_CSYS_PLANE3 793
#define PRO_E_CSYS_PLANE 794
#define PRO_E_CSYS_REF1 795
#define PRO_E_CSYS_REF2 796
#define PRO_E_CSYS_DIR 797
#define PRO_E_CSYS_ORIGIN 798
#define PRO_E_CSYS_DIR1 799
#define PRO_E_CSYS_DIR2 800
#define PRO_E_CSYS_CSYS 801
#define PRO_E_CSYS_TRAN_FILE 802
#define PRO_E_CSYS_MOVES 803
#define PRO_E_CSYS_MOVES_VIEW 804
#define PRO_E_CSYS_MOVE 805
#define PRO_E_CSYS_MOVE_METHOD 806
#define PRO_E_CSYS_MOVE_VALUE 807
#define PRO_E_CSYS_ROT 808
#define PRO_E_CSYS_1ROT 809
#define PRO_E_CSYS_2ROT 810
#define PRO_E_CSYS_SEL_AXES 811
#define PRO_E_CSYS_X_DIR 812
#define PRO_E_CSYS_Y_DIR 813
#define PRO_E_PAT_TABLE_DATA 814
#define PRO_E_STD_DRAFT_DIR_TYPE 815
#define PRO_E_STD_DRAFT_ANGLE_TYPE 816
#define PRO_E_STD_DRAFT_ANGLE_COMPOUND 817
#define PRO_E_STD_DRAFT_SYMMETRIC 818
#define PRO_E_STD_DRAFT_ANGLE1_ATTR 819
#define PRO_E_STD_DRAFT_ANGLE1 820
/* swept blend */
#define PRO_E_SWP_BLN_SPINE 821
#define PRO_E_SWP_BLN_SECTIONS 822
#define PRO_E_STD_USEQLT_LVOUT 823
#define PRO_E_STD_USEQLT_SCALCSYS 824
#define PRO_E_STD_CRV_GET_CSYS 825
#define PRO_E_STD_CRV_CSYS 826
#define PRO_E_STD_CRV_GET_CSYS_TYPE 827
#define PRO_E_STD_CRV_ENTER_EQUATION 828
#define PRO_E_STD_CRV_PROJ_SECTION 829
#define PRO_E_STD_TWO_PROJ_SEC1 830
#define PRO_E_STD_TWO_PROJ_SEC2 831
#define PRO_E_PAT_MULT_TABLE_DIMS 832
#define PRO_E_STD_SRFOFF_SRF 833
#define PRO_E_BNBLN_CONNECT_SURF_CHAIN 834
/* Surface Offset */
#define PRO_E_SRF_OFFS_TYPE 835
#define PRO_E_SRF_OFFS_METHOD 836
#define PRO_E_SRF_OFFS_SCALINGCSYS 837
#define PRO_E_SRF_OFFS_TRANSLATION 838
#define PRO_E_SRF_OFFS_XAXIS 839
#define PRO_E_SRF_OFFS_YAXIS 840
#define PRO_E_SRF_OFFS_ZAXIS 841
#define PRO_E_SECTION_TYPE 842
/* round */
#define PRO_E_RND_TYPE_CMP 843
#define PRO_E_RND_TMPGEOM_OPT 844
#define PRO_E_RND_EXTENT_CMP 845
#define PRO_E_RND_EXT_ABLEND 846
#define PRO_E_RND_EXT_TRMSRF 847
#define PRO_E_RND_EXT_REFS 848
#define PRO_E_RND_ATTR_CMP 849
#define PRO_E_RND_ATTR_BALL 850
#define PRO_E_RND_ATTR_TRDEF 851
#define PRO_E_RND_ATTR_VARRAD 852
#define PRO_E_RND_ATTR_SHAPE 853
#define PRO_E_RND_ATTR_CONPAR 854
#define PRO_E_RND_SETS_ARR 855
#define PRO_E_RND_SETS_CMP 856
#define PRO_E_RNDSET_SHAPE 857
#define PRO_E_RNDSET_REFTYP 858
#define PRO_E_RNDSET_REFS_CMP 859
#define PRO_E_RNDSET_REF_CHAIN 860
#define PRO_E_RNDSET_REF_EDG1 861
#define PRO_E_RNDSET_REF_SRF1 862
#define PRO_E_RNDSET_REF_EDG2 863
#define PRO_E_RNDSET_REF_SRF2 864
#define PRO_E_RNDSET_REF_REPLSRF 865
/* spine */
#define PRO_E_RNDSET_SPINECRV 866
/* round thru curve */
#define PRO_E_RNDSET_RADCRV_CMP 867
#define PRO_E_RNDSET_RADCRV_REF 868
#define PRO_E_RNDSET_RADCRV_SRFS 869
/* round set radius elements */
#define PRO_E_RNDRAD_ARR 870
#define PRO_E_RNDRAD_CMP 871
#define PRO_E_RNDRAD_PNTREF 872
#define PRO_E_RNDRAD_RADCMP 873
#define PRO_E_RNDRAD_RADTYP 874
#define PRO_E_RNDRAD_RADVAL 875
#define PRO_E_RNDRAD_EDGREF 876
#define PRO_E_RNDRAD_PNTVTX 877
#define PRO_E_RND_TRNS_LIST 878
#define PRO_E_RND_TRN_COMP 879
#define PRO_E_RND_TRN_TYPE 880
#define PRO_E_RND_TRN_REFS_LST 881
#define PRO_E_RND_TRN_REF_CMP 882
#define PRO_E_RND_TRN_REF 883
#define PRO_E_RND_TRN_SPHDIST 884
/* sphere radius element */
#define PRO_E_RND_TRN_SPHRAD 885
/* stop transition reference */
#define PRO_E_RND_TRNST_REFS 886
/* patch transition elements */
#define PRO_E_RND_TRN_FILTS_LST 887
#define PRO_E_RND_TRN_FILTS_CMP 888
#define PRO_E_RND_TRN_FLTSRF 889
#define PRO_E_RND_TRN_FLTRAD 890
#define PRO_E_PAT_TABLE_INSTANCES 891
#define PRO_E_PAT_TABLE_INSTANCE 892
#define PRO_E_PAT_TABLE_INSTANCE_INDEX 893
#define PRO_E_PAT_TABLE_INSTANCE_DIMS 894
#define PRO_E_PAT_TABLE_INSTANCE_DIM_VALUE 895
#define PRO_E_SWEEP_SPINE 896
#define PRO_E_SWEEP_SECTION 897
/* curve thru points */
#define PRO_E_STD_CRV_CONN_TYPE 898
#define PRO_E_STD_CRV_SEL_TYPE 899
#define PRO_E_18_ATTR_HLCSWP_ORIENT 900
#define PRO_E_19_TRAJECTORY 901
#define PRO_E_OLD_ROOT_ELEMENT 902
#define PRO_E_STD_CRV_ON_SURF 1000
#define PRO_E_STD_CRV_PNTS_REF 1001
#define PRO_E_STD_CRV_PNTS_TWEAK 1002
#define PRO_E_STD_CRV_TANG_COND 1003
#define PRO_E_STD_CRV_PNTS_RAD 1004
#define PRO_E_STD_CRV_PNTS 1005
#define PRO_E_STD_CRV_TANG 1006
#define PRO_E_STD_CRV_PNTS_LIST 1007
#define PRO_E_STD_CRV_PNTS_ON_SURF_REF 1008
#define PRO_E_STD_CRV_PNTS_ATTR 1009
#define PRO_E_STD_CRV_TANG_SUB 1010
#define PRO_E_FOREIGN_CURVE_CLASS 1011
#define PRO_E_FOREIGN_CURVE_CSYS_REF 1012
#define PRO_E_FOREIGN_CURVE_CONTINUITY 1013
#define PRO_E_FOREIGN_CURVE_DATA_VAL 1014
#define PRO_E_RUNNER_DEF_SIZE 1015
#define PRO_E_RUNNER_SHAPE 1016
#define PRO_E_RUNNER_SEGMENT_SIZES 1017
#define PRO_E_START_HEIGHT 1018
#define PRO_E_GCPY_FEAT_NAME 1019
/* Component Constraint Attributes */
#define PRO_E_COMPONENT_CONSTR_ATTR 1020
#define PRO_E_CONTOUR2 1021
#define PRO_E_SIDESURF 1022
#define PRO_E_CONTOUR1 1023
#define PRO_E_SYNC 1024
#define PRO_E_TRAJ_PREVIEW 1025
/* Orient attributes */
#define PRO_E_COMPONENT_COMP_ORIENT 1026
#define PRO_E_COMPONENT_ASSM_ORIENT 1027
#define PRO_E_HOLESETS 1028
#define PRO_E_DRILL_PART_DATA 1029
#define PRO_E_DRILL_PARTS 1030
#define PRO_E_AUTO_SEL_DRILL_PARTS 1031
#define PRO_E_HOLESET 1032
#define PRO_E_HOLESET_ID 1033
#define PRO_E_HOLESET_DEPTH 1034
#define PRO_E_HOLESET_DEPTH_BY_TYPE 1035
#define PRO_E_HOLESET_DEPTH_TYPE 1036
#define PRO_E_HOLESET_DEPTH_PLATES 1037
#define PRO_E_HOLESET_DEPTH_PLATE 1038
#define PRO_E_HOLESET_PLATE_START 1039
#define PRO_E_HOLESET_PLATE_END 1040
#define PRO_E_HOLESET_PLATE_DEPTH 1041
#define PRO_E_HOLESET_PLATE_CDIAM 1042
#define PRO_E_HOLESET_PLATE_BRKOUT 1043
#define PRO_E_HOLESET_SELECTION_RULES 1044
#define PRO_E_HOLESET_TYPE 1045
#define PRO_E_HOLESET_SEL_AUTO_CHAMFER 1046
#define PRO_E_HOLESET_SEL_INDIV_AXES 1047
#define PRO_E_HOLESET_SEL_AXIS_PATTS 1048
#define PRO_E_HOLESET_SEL_DRILL_GROUPS 1049
#define PRO_E_HOLESET_SEL_BY_DIAMETERS 1050
#define PRO_E_HOLESET_SEL_BY_SURFACES 1052
#define PRO_E_HOLESET_SEL_BY_PARAMS 1053
#define PRO_E_HOLESET_SEL_BY_PARAM 1054
#define PRO_E_HOLESET_SEL_PARAM_NAME 1055
#define PRO_E_HOLESET_SEL_PARAM_VAL 1056
#define PRO_E_HOLESET_SEL_PARAM_REL 1057
#define PRO_E_HOLESET_START_HOLE 1058
#define PRO_E_HOLESET_FLIPPED_AXES 1059
#define PRO_E_HOLESET_UNFLIPPED_AXES 1060
#define PRO_E_HOLESET_SEL_UNSEL_AXES 1061
#define PRO_E_BEND_DIRECTION 1062
#define PRO_E_GCPY_PUBD_GEOM 1063
/* Movement Element, part of component assembly */
#define PRO_E_COMPONENT_MOVEMENTS 1064
#define PRO_E_COMPONENT_MOVEMENT 1065
#define PRO_E_COMPONENT_MOVEMENT_TYPE 1066
#define PRO_E_COMPONENT_MOVEMENT_REF 1067
#define PRO_E_COMPONENT_MOVEMENT_VALUE 1068
#define PRO_E_WIND_SEC_PLN 1069
#define PRO_E_WIND_COMP 1070
#define PRO_E_WIND_FROM_TO 1071
#define PRO_E_PAT_TABLE_DIM 1072
#define PRO_E_SPLIT_SURF_CURVE 1073
#define PRO_E_SPLIT_SURFS 1074
#define PRO_E_SPLIT_SURFS_SECTION 1075
#define PRO_E_WLD_PREP_TYPE 1076
#define PRO_E_WLD_PREP_CONTACT_SRFS 1077
#define PRO_E_WLD_PREP_EDGE_SETS 1078
#define PRO_E_WLD_PREP_DIMS 1079
#define PRO_E_NUMBER_OF_FACES 1080
#define PRO_E_MIN_SRF_CLR 1081
#define PRO_E_ROUGH_SRFS 1082
#define PRO_E_STOCK_BOUND_SKETCH 1083
#define PRO_E_STOCK_BOUND_WP_SEL 1084
#define PRO_E_TURN_PROF_CRV 1085
#define PRO_E_TURN_PROF_ST_EXT 1086
#define PRO_E_TURN_PROF_EN_EXT 1087
#define PRO_E_SLOPE_MILL_ANGLE 1088
#define PRO_E_SLOPE_MILL_DIR 1089
#define PRO_E_SLOPE_SIDE_CHOICE 1090
#define PRO_E_WALL_DEPTH 1091
#define PRO_E_WIND_BOTTOM 1092
#define PRO_E_DTMPNT_DIRECTION 1093
#define PRO_E_DTMPNT_EDGE 1094
#define PRO_E_DTMPNT_PLNNORM 1095
#define PRO_E_DTMPNT_LN1PNT 1096
#define PRO_E_DTMPNT_LN2PNT 1097
#define PRO_E_DTMPNT_POINT 1098
#define PRO_E_DTMPNT_OFFSET_X 1099
#define PRO_E_DTMPNT_OFFSET_Y 1100
#define PRO_E_DTMPNT_OFFSET_Z 1101
#define PRO_E_DTMPNT_CSYSTYPE 1102
#define PRO_E_DTMPNT_CSYS 1103
#define PRO_E_DTMPNT_X 1104
#define PRO_E_DTMPNT_Y 1105
#define PRO_E_DTMPNT_Z 1106
#define PRO_E_DTMPNT_RADIUS 1107
#define PRO_E_DTMPNT_THETA 1108
#define PRO_E_DTMPNT_PHI 1109
#define PRO_E_DTMPNT_DIMENSIONS 1110
#define PRO_E_DTMPNT_OFFSET_PNT_DIST 1111
#define PRO_E_DTMPNT_CSYS_VEC 1112
#define PRO_E_GCPY_LOCATION 1113
#define PRO_E_SRF_MRG_PRNT_QLT 1114
#define PRO_E_SRF_MRG_ADTL_QLT 1115
#define PRO_E_SRF_MRG_TYPE 1116
#define PRO_E_SRF_MRG_PRNT_QLT_SIDE 1117
#define PRO_E_SRF_MRG_ADTL_QLT_SIDE 1118
/* Feature Intersections */
#define PRO_E_FEATURE_INTERSECTION 1119
#define PRO_E_FEATURE_INTERSECT_PART 1120
#define PRO_E_FEATURE_INTERSECT_LEVEL 1121
/* Feature Mach Area */
#define PRO_E_MILLED_SRFS 1122
#define PRO_E_CHECK_SRFS 1123
#define PRO_E_TOOL_RADIUS 1124
#define PRO_E_MACH_SRFS_OPTION 1125
#define PRO_E_CSYS_TYPE 1126
#define PRO_E_TOOL_AXIS 1127
#define PRO_E_CSYS_THETA_DIR 1128
#define PRO_E_CSYS_PHI_DIR 1129
#define PRO_E_CSYS_Z_DIR 1130
/* Non redef dtm srf type */
#define PRO_E_DTM_SRF_TYPE 1131
/* Analysis Feature 19_odui */
#define PRO_E_ANALYSIS_TYPE 1132
#define PRO_E_ANALYSIS_RES_PARM_UI 1133
#define PRO_E_ANALYSIS_RES_DATM_UI 1134
#define PRO_E_ANALYSIS_RESULT_UI 1135
#define PRO_E_ANALYSIS_RESULT_UI_DATMS 1136
#define PRO_E_ANALYSIS_Y_NO_OPT 1137
#define PRO_E_ANALYSIS_PARM_NAME 1138
/* Additional Surface Offset and Thin Use Quilt elements. */
#define PRO_E_SRF_OFFS_ACTION 1139
#define PRO_E_SRF_OFFS_HANDLINGS 1140
#define PRO_E_SRF_OFFS_HANDLING 1141
#define PRO_E_SRF_OFFS_REF_SEL 1142
#define PRO_E_SRF_OFFS_REFQUILT 1143
#define PRO_E_SRF_OFFS_AXISES 1144
#define PRO_E_SRF_OFFS_CTRLFIT 1145
#define PRO_E_MATERIAL_SIDE 1146
#define PRO_E_TRIM_QLT_SIDE 1147
#define PRO_E_RUNNER_SK 1148
#define PRO_E_RUNNER_DIR 1149
#define PRO_E_WLD_PREP_AFF_MDLS 1150
#define PRO_E_CRV_SILH_LOOP_SEL 1151
#define PRO_E_FEAT_VIEW 1152
/* Shadow21 steps */
#define PRO_E_SHADOW_REF_MODEL 1153
#define PRO_E_SHADOW_CURVES 1154
#define PRO_E_SHADOW_CRV_SMNT 1155
#define PRO_E_OLD_ATTRIBUTES 1156
#define PRO_E_OLD_REV_ANGLE 1157
#define PRO_E_HOLESET_SEL_BY_TABLE 1158
/*** Frames, swept blends and sweeps ***/
#define PRO_E_FRAME_SETUP 1159
#define PRO_E_END_SRF_ATTR 1160
#define PRO_E_FAKE_SWPBLN_SEC_SETUP 1161
#define PRO_E_SWPBLN_CNTRL_SETUP 1162
#define PRO_E_FAKE_SWPBLN_TANGENCY 1163
#define PRO_E_SWPBLN_CNTRL_TYPE 1164
#define PRO_E_SWPBLN_CNTRL_ELEM 1165
#define PRO_E_SWPBLN_CENTER_LINE 1166
#define PRO_E_SWPBLN_AREA_GRAPH_UI 1167
#define PRO_E_SWP_SEC_TYPE 1168
#define PRO_E_SWP_SEC_UI 1169
#define PRO_E_FRM_NORMAL 1170
#define PRO_E_FRM_ORIENT 1171
#define PRO_E_FRM_PIVOT_DIR 1172
#define PRO_E_FRM_TRAJ_UI 1173
#define PRO_E_FRM_X_TRAJ 1174
#define PRO_E_FRM_Z_TRAJ 1175
#define PRO_E_FRM_OPT_TRAJ 1176
#define PRO_E_VSWP_SEC_SETUP 1177
#define PRO_E_HOLESET_EDGE_BREAK 1178
#define PRO_E_SRF_OFFS_DIRECTION 1179
#define PRO_E_USEQLT_SOLID_SIDE 1180
#define PRO_E_STOCK_BOUND_COMP 1181
#define PRO_E_TURN_PROF_COMP 1182
#define PRO_E_TURN_OPTION 1183
#define PRO_E_WLD_PREP_NEUT_PLN 1184
#define PRO_E_TRAJ_SKETCH 1185
#define PRO_E_WLD_PREP_FILL 1186
#define PRO_E_START_WALL 1187
#define PRO_E_CRV_SILH_SLIDES_VOL 1188
#define PRO_E_CRV_SILH_GAP_CLOSURE 1189
#define PRO_E_TRIM1S_DIR 1190
#define PRO_E_TRIM1S_ATTR 1191
#define PRO_E_MFG_TRIM_OPT_TRIM1S 1192
#define PRO_E_GEN_DIR 1193
#define PRO_E_GEN_DIR_USE_AUX 1194
#define PRO_E_GEN_DIR_FIRST_REF 1195
#define PRO_E_GEN_DIR_CSYS_OPT 1196
#define PRO_E_GEN_DIR_CSYS_AXIS 1197
#define PRO_E_GEN_DIR_X_TRAN 1198
#define PRO_E_GEN_DIR_Y_TRAN 1199
#define PRO_E_GEN_DIR_Z_TRAN 1200
#define PRO_E_GEN_DIR_SECOND_REF 1201
#define PRO_E_GEN_DIR_OPT 1202
#define PRO_E_GEN_DIR_ORIENT_PNT 1203
#define PRO_E_GEN_DIR_SIDE 1204
#define PRO_E_STEP_CORNER_RELIEF 1205
#define PRO_E_BNBLN_RULED 1206
#define PRO_E_ROT_ENVLP 1207
#define PRO_E_EDIT_CURVE 1208
#define PRO_E_FROM_SURFACE 1209
#define PRO_E_TO_SURFACE 1210
#define PRO_E_MFG_MATERIAL_SIDE 1211
#define PRO_E_FEATURE_NAME 1212
#define PRO_E_DSHARE_BASE_MODEL 1213
#define PRO_E_DRVD_VAR_DIMS 1214
#define PRO_E_TRIM1S_REF_PART 1215
#define PRO_E_AUTO_NCL_COMMAND_BEFORE_LOADTL 1216
#define PRO_E_AUTO_NCL_COMMAND_AFTER_FROM 1217
#define PRO_E_AUTO_NCL_COMMAND_AFTER_GOHOME 1218
#define PRO_E_AUTO_NCL_COMMAND_BEFORE_EACH_PASS 1219
#define PRO_E_AUTO_NCL_COMMAND_AFTER_EACH_PASS 1220
#define PRO_E_AUTO_NCL_COMMAND_LAST_RETRACT 1221
#define PRO_E_AUTO_NCL_COMMAND_AFTER_SPINDLE 1222
#define PRO_E_AUTO_NCL_COMMAND_AFTER_LOADTL 1223
/* FT_SLDBEND */
#define PRO_E_SLDBEND_FQ 1292
/*
#define PRO_E_SLDBEND_DIR 1293
*/
#define PRO_E_SLDBEND_OPTS 1294
#define PRO_E_SLDBEND_CRVS 1295
/* end FT_SLDBEND */
#define PRO_E_GCPY_SW_OPTIONS 1296
#define PRO_E_GCPY_SW_DEP 1297
#define PRO_E_GCPY_SW_COMP 1298
/* FT_FLATQLT */
#define PRO_E_FLATQLT_QLT 1299
#define PRO_E_FLATQLT_PNT 1300
#define PRO_E_FLATQLT_PAR_MET 1301
#define PRO_E_FLATQLT_PAR_PNTS 1302
#define PRO_E_FLATQLT_PAR_SRF 1303
#define PRO_E_FLATQLT_PLOPT 1304
#define PRO_E_FLATQLT_CSYS 1305
#define PRO_E_FLATQLT_X_PNT 1306
#define PRO_E_FLATQLT_N1 1307
#define PRO_E_FLATQLT_N2 1308
/* End: FT_FLATQLT */
#define PRO_E_GCPY_EXTERNALIZE 1310
#define PRO_E_SRF_OFFS_SIDEQUILT 1312
#define PRO_E_START_LEAD_POINT 1313
#define PRO_E_STEP_DEFORM_CONTROL 1314
#define PRO_E_STEP_DEFORM_TYPE 1315
#define PRO_E_STEP_DEFORM_SKETCH 1316
#define PRO_E_DRVD_VAR_FEATS 1317
#define PRO_E_DRVD_EXT_PLACE 1318
#define PRO_E_GCPY_NOTES 1319
/* Std ODUI Copy Geom */
#define PRO_E_STD_GCPY_FEAT_NAME 1320
#define PRO_E_STD_GCPY_REFS_COLS 1321
#define PRO_E_STD_GCPY_SURF_REFS 1322
#define PRO_E_STD_GCPY_EDGE_REFS 1323
#define PRO_E_STD_GCPY_CRV_REFS 1324
#define PRO_E_STD_GCPY_MISC_REFS 1325
#define PRO_E_STD_GCPY_PUBD_GEOM 1326
#define PRO_E_STD_GCPY_CSYS_PLACE 1327
#define PRO_E_STD_GCPY_LOCATION_EXT_CSYS 1328
#define PRO_E_STD_GCPY_LOCATION_LOC_CSYS 1329
#define PRO_E_STD_GCPY_EXT_MDL 1330
#define PRO_E_STD_GCPY_EXTERNALIZE 1331
#define PRO_E_STD_GCPY_UPDT_PLACE 1332
#define PRO_E_STD_GCPY_LOCATION 1333
#define PRO_E_STD_GCPY_OPT_DEFD 1334
#define PRO_E_STD_GCPY_DEP 1335
#define PRO_E_STD_GCPY_SW_OPTIONS 1336
#define PRO_E_STD_GCPY_SW_DEP 1337
#define PRO_E_STD_GCPY_SW_COMP 1338
#define PRO_E_SRF_END_ATTRIBUTES 1339
#define PRO_E_HLE_PLACEMENT 1340
#define PRO_E_HLE_PRIM_REF 1341
#define PRO_E_HLE_GEOMETRY 1342
#define PRO_E_HLE_WORKFLOW 1343
#define PRO_E_HLE_PREDEFHOLE 1344
#define PRO_E_HLE_DEPTHVAL 1345
#define PRO_E_HLE_FASTENPRM 1346
#define PRO_E_HLE_HOLEDIAM 1347
#define PRO_E_HLE_DRILLANGLE 1348
#define PRO_E_HLE_CBOREDEPTH 1349
#define PRO_E_HLE_CBOREDIAM 1350
#define PRO_E_HLE_CSINKDIAM 1351
#define PRO_E_HLE_CSINKANGLE 1352
#define PRO_E_HLE_THRDDIAM 1353
#define PRO_E_HLE_THRDDEPTH 1354
#define PRO_E_HLE_CREATDIR 1355
#define PRO_E_HLE_THRDSERIS 1356
#define PRO_E_HLE_THRDCLASS 1357
#define PRO_E_HLE_SCREWSIZE 1358
#define PRO_E_HLE_THRDPINCH 1359
#define PRO_E_APPEX 1360
#define PRO_E_STD_GCPY_EXT_MDL_SEL 1361
#define PRO_E_STD_GCPY_LOCATION_TYPE 1362
/* For Group */
#define PRO_E_GROUP_NAME 1363
#define PRO_E_GROUP_FEATS 1364
#define PRO_E_GROUP_CONSTRUCTION 1365
#define PRO_E_GROUP_RESULT 1366
/* Hull features */
#define PRO_E_FRSYS_REF_QUILT 1367
#define PRO_E_FRSYS_REF_CRD 1368
#define PRO_E_FRSYS_REF_CSYS 1369
#define PRO_E_FRSYS_INIT_OFFS 1370
#define PRO_E_FRSYS_SPNG_TBL 1371
#define PRO_E_FRSYS_SPNG_DATA 1372
#define PRO_E_FRSYS_UPTO_FR 1373
#define PRO_E_FRSYS_SPACING 1374
#define PRO_E_COAMING_NAME 1375
#define PRO_E_COAMING_HEIGHT 1376
#define PRO_E_COAMING_PLACEMENT 1377
#define PRO_E_COAMING_OFFSET 1378
#define PRO_E_COAMING_SELECT 1379
#define PRO_E_COMPARTMENT_QUILT_UP 1380
#define PRO_E_COMPARTMENT_QUILT_LOW 1381
#define PRO_E_COMPARTMENT_QUILT_PORT 1382
#define PRO_E_COMPARTMENT_QUILT_STARB 1383
#define PRO_E_COMPARTMENT_QUILT_FORD 1384
#define PRO_E_COMPARTMENT_QUILT_AFT 1385
#define PRO_E_REFS_FT_TYPE 1386
#define PRO_E_REFS_FT_REFS 1387
/* Added Entries for proship module */
#define PRO_E_STOBJ_REF 1388
#define PRO_E_STOBJ_THICKNESS 1389
#define PRO_E_STOBJ_CUTOUT_MODE 1390
#define PRO_E_STOBJ_CUTOUT_SEL 1391
#define PRO_E_STOBJ_CUTOUT_IDFY 1392
#define PRO_E_STOBJ_OBJ_ARR 1393
#define PRO_E_STOBJ_PEN_OBJLIST 1394
#define PRO_E_STOBJ_ID_CUT_TYPE 1395
#define PRO_E_STOBJ_CUTOUT_DISP 1396
#define PRO_E_STOBJ_CUTOUT_LAYER 1397
#define PRO_E_STOBJ_CUTOUT_STIFF_REF 1398
#define PRO_E_STOBJ_CUTOUT_OBJLIST_REF 1399
/* Structural Hole ODUI */
#define PRO_E_HULL_HOLE_ROOT 1400
#define PRO_E_HULL_HOLE_MODE 1401
#define PRO_E_HULL_HOLE_SKETCH 1402
#define PRO_E_HULL_HOLE_ROTATION_ANGLE 1403
#define PRO_E_HULL_HOLE_STD_SEC 1404
#define PRO_E_HULL_HOLE_STD_SEC_ID 1405
#define PRO_E_HULL_HOLE_ORIENTATION 1406
#define PRO_E_HULL_HOLE_SURFACE 1407
#define PRO_E_HULL_HOLE_PLACEMENT 1408
#define PRO_E_HULL_HOLE_EXISTING_EDGES 1409
#define PRO_E_HULL_HOLE_EDGES 1410
#define PRO_E_HULL_HOLE_UV 1411
/* vrahangd added for stiffener. */
#define PRO_E_STIFF_GEOM 1412
#define PRO_E_STIFF_SECT 1413
#define PRO_E_STIFF_SECTYPE 1414
#define PRO_E_STIFF_SECNAME 1415
#define PRO_E_STIFF_REFPLT 1416
#define PRO_E_STIFF_TRJCT 1417
#define PRO_E_STIFF_ENDCONS 1418
#define PRO_E_STIFF_END1CONSREF 1419
#define PRO_E_STIFF_SETBACK1VAL 1420
#define PRO_E_STIFF_END2CONSREF 1421
#define PRO_E_STIFF_SETBACK2VAL 1422
#define PRO_E_STIFF_END1VAL 1423
#define PRO_E_STIFF_END2VAL 1424
#define PRO_E_STIFF_THICKDIR 1425
#define PRO_E_STIFF_WEBOFSTVAL 1426
#define PRO_E_STIFF_WEBROTOPT 1427
#define PRO_E_STIFF_IDENTIFY 1428
#define PRO_E_STIFF_CLASSIFIC 1429
#define PRO_E_HULL_MATCODE 1430
#define PRO_E_STIFF_COUTYPE 1431
#define PRO_E_STIFF_COLLTYPE 1432
#define PRO_E_STIFF_ORIENT 1433
#define PRO_E_STIFF_WEBORNT 1434
#define PRO_E_STIFF_FLNGORNT 1435
#define PRO_E_STIFF_ROTATE 1436
#define PRO_E_STIFF_ROTOPT 1437
#define PRO_E_STIFF_ROTVAL 1438
#define PRO_E_STIFF_ROTEND1 1439
#define PRO_E_STIFF_ROTEND2 1440
#define PRO_E_STIFF_SELARR 1441
#define PRO_E_STIFF_SELREF 1442
#define PRO_E_STIFF_SELANG 1443
#define PRO_E_DATUM_CURVE_SURF 1444
#define PRO_E_STIFF_SEL_ROT_ENDREF 1445
#define PRO_E_STIFF_END1_CONFIGURE_OPTS 1446
#define PRO_E_STIFF_END2_CONFIGURE_OPTS 1447
#define PRO_E_STIFF_END1_TAPER_OPTS 1448
#define PRO_E_STIFF_END2_TAPER_OPTS 1449
#define PRO_E_STIFF_END1_TAPER_VALUE 1450
#define PRO_E_STIFF_END2_TAPER_VALUE 1451
/* Plate related changes begin here */
#define PRO_E_PLATE_BOUND_CMP 1462
#define PRO_E_PLATE_BOUND_TAB 1463
#define PRO_E_PLATE_SPLIT_SELBOUND 1464
#define PRO_E_PLATE_SELQUILT 1465
#define PRO_E_PLATE_SELBOUND 1466
#define PRO_E_PLATE_THICKOPT 1467
#define PRO_E_PLATE_VALTHICK 1468
#define PRO_E_PLATE_LISTTHICK 1469
#define PRO_E_PLATE_THICKORIENT 1470
#define PRO_E_PLATE_OFFSTMOLDSRF 1471
#define PRO_E_PLATE_KNUCKRAD 1472
#define PRO_E_PLATE_MATCODE 1473
#define PRO_E_PLATE_IDENTIFY 1474
#define PRO_E_PLATE_GEOMETRY 1475
#define PRO_E_PLATE_SHP_PARAMETER 1476
#define PRO_E_PLATE_EXTEND_EDGE 1477
#define PRO_E_PLATE_EXTEND_DIST 1478
/* Plate related changes end here */
#define PRO_E_DATUM_CURVE_CURVE_MENU 1484
#define PRO_E_DATUM_CURVE_REF_TO_CRV 1485
#define PRO_E_DATUM_CURVE_REF_CURVE 1486
#define PRO_E_DATUM_CURVE_FIRST_CURVE 1487
#define PRO_E_DATUM_CURVE_SECOND_CURVE 1488
#define PRO_E_DATUM_CURVE_DIRECTION 1489
#define PRO_E_DATUM_CURVE_IS_CONSTANT 1490
#define PRO_E_DATUM_CURVE_REF_POINT 1491
#define PRO_E_DATUM_CURVE_OFFSET_VAL 1492
#define PRO_E_DATUM_CURVE_NO_OF_CURVES 1493
#define PRO_E_DATUM_CURVE_M_DIR 1494
#define PRO_E_DATUM_CURVE_REF_PLANE 1495
#define PRO_E_DATUM_CURVE_IS_ASSIGN 1496
#define PRO_E_DATUM_CURVE_VAR_OFFSET_TAB 1497
#define PRO_E_DATUM_CURVE_VAR_OFFSET_CMP 1498
#define PRO_E_DATUM_CURVE_VAR_OFFSET_REF 1499
#define PRO_E_DATUM_CURVE_VAR_OFFSET_VAL 1500
#define PRO_E_BEAM_GEOM_TRAJECT 1501
/* Added for User Defined Gravity Point Option */
#define PRO_E_GRAVITY_POINT 1502
#define PRO_E_USER_DEF_GP 1503
/* Unused constants between 1502 -1508 removed in J-01 */
#define PRO_E_BEAM_ORIENT 1509
#define PRO_E_BEAM_ORNT_WEB 1510
#define PRO_E_BEAM_ORNT_FLANGE 1511
#define PRO_E_BEAM_ORNT_ALONG_WEB_DBL 1512
#define PRO_E_BEAM_ORNT_ALONG_FLANGE_DBL 1513
#define PRO_E_BEAM_IDENTIFY 1514
#define PRO_E_BEAM_IDENT_CLASSIFY 1515
#define PRO_E_BEAM_IDENT_MAT_CODE 1516
#define PRO_E_BEAM_GEOM 1517
#define PRO_E_BEAM_TRJOPT 1518
#define PRO_E_BEAM_TRJLOC 1519
#define PRO_E_BEAM_WEBORNT 1520
#define PRO_E_FIT_OFFSET 1544
#define PRO_E_TRIM1S_OFFSET 1545
#define PRO_E_TRIM1S_REF_TYPE 1546
#define PRO_E_HULL_FEAT_NAME 1547
#define PRO_E_FRSYS_LBP 1548
#define PRO_E_FRSYS_DIRECTION 1549
/* ship deck surface */
#define PRO_E_DECK_NAME 1550
#define PRO_E_DECK_HEIGHT_REF 1551
#define PRO_E_DECK_HEIGHT_VALUE 1552
#define PRO_E_DECK_BOUND_SRF 1553
#define PRO_E_DECK_EXTENT 1554
#define PRO_E_DECK_EXTENT_FWD 1555
#define PRO_E_DECK_EXTENT_AFT 1556
#define PRO_E_DECK_EXTENT_PORT 1557
#define PRO_E_DECK_EXTENT_STBD 1558
#define PRO_E_DECK_FWD_SHEER 1559
#define PRO_E_DECK_SHEER_FWD_TYPE 1560
#define PRO_E_DECK_SHEER_FWD_VALUE 1561
#define PRO_E_DECK_SHEER_FWD_EXT_REF 1562
#define PRO_E_DECK_SHEER_FWD_EXT_VALUE 1563
#define PRO_E_DECK_SHEER_AFT_TYPE 1564
#define PRO_E_DECK_SHEER_AFT_VALUE 1565
#define PRO_E_DECK_SHEER_AFT_EXT_REF 1566
#define PRO_E_DECK_SHEER_AFT_EXT_VALUE 1567
#define PRO_E_DECK_CAMBER 1568
#define PRO_E_DECK_CAMBER_TYPE 1569
#define PRO_E_DECK_CAMBER_VALUE 1570
#define PRO_E_DECK_FLAT_OF_CROWN 1571
#define PRO_E_COMPARTMENT_ATTRS 1572
#define PRO_E_COMPARTMENT_EXTENT 1573
#define PRO_E_COMPARTMENT_ATTRS_DATA 1574
#define PRO_E_COMPARTMENT_TANK_TYPE 1575
#define PRO_E_COMPARTMENT_GRAVITY 1576
#define PRO_E_COMPARTMENT_FILL_RATIO 1577
#define PRO_E_COMPARTMENT_PERMEABILITY 1578
#define PRO_E_HULL_BHD_BULKHEAD_INPUTS 1579
#define PRO_E_HULL_BHD_BULKHEAD_NAME 1580
#define PRO_E_HULL_BHD_ORIENTATION 1581
#define PRO_E_HULL_BHD_BULKHEAD_TYPE 1582
#define PRO_E_HULL_BHD_BULKHEAD_LOCATION 1583
#define PRO_E_HULL_BHD_DEFINITION_METHOD 1584
#define PRO_E_HULL_BHD_FWD_SECTION 1585
#define PRO_E_HULL_BHD_AFT_SECTION 1586
#define PRO_E_HULL_BHD_EXTENTS 1587
#define PRO_E_HULL_BHD_BULKHEAD_PLANE 1588
#define PRO_E_HULL_BHD_PORT 1589
#define PRO_E_HULL_BHD_STARBOARD 1590
#define PRO_E_HULL_BHD_FORWARD 1591
#define PRO_E_HULL_BHD_AFT 1592
#define PRO_E_HULL_BHD_TOP 1593
#define PRO_E_HULL_BHD_BOTTOM 1594
#define PRO_E_HULL_BHD_CORRUGATION_SWEDGE 1595
#define PRO_E_HULL_BHD_STOOL_LOW_H2 1596
#define PRO_E_HULL_BHD_STOOL_LOW_H1 1597
#define PRO_E_HULL_BHD_PITCH 1598
#define PRO_E_HULL_BHD_FILLET_RADIUS 1599
#define PRO_E_HULL_BHD_DEPTH 1600
#define PRO_E_HULL_BHD_STOOL_UP_H1 1601
#define PRO_E_HULL_BHD_STOOL_UP_H2 1602
#define PRO_E_HULL_BHD_STOOL_UP_WIDTH 1603
#define PRO_E_HULL_BHD_L 1604
#define PRO_E_HULL_BHD_STOOL_LOW_WIDTH 1605
#define PRO_E_HULL_BHD_STOOL_SEL_DIR 1606
#define PRO_E_HULL_BHD_STOOL_SEL_PARAMS 1607
#define PRO_E_HULL_BHD_STOOL_SEL_SRF 1608
#define PRO_E_HULL_BHD_STOOL_BND_SRF 1609
#define PRO_E_HULL_BHD_STOOL_SIT_SRF 1610
#define PRO_E_HULL_BHD_STOOL_DEF_PLN 1611
#define PRO_E_SHELL_QUILT 1612
#define PRO_E_SHELL_FRAME 1613
#define PRO_E_SHELL_HULLPART 1614
#define PRO_E_SHELL_REFER 1615
#define PRO_E_SHELL_OFFREF 1616
#define PRO_E_SHELL_UPTO 1617
#define PRO_E_SHELL_OFFUPTO 1618
#define PRO_E_SHELL_CURVE 1619
#define PRO_E_SHELL_CRVSELECT 1620
#define PRO_E_MLDVOL_NAME 1621
#define PRO_E_STD_GCPY_SW_ADV 1622
#define PRO_E_STD_DRVD_BASE_MODEL 1623
#define PRO_E_STD_DRVD_VAR_DIMS 1624
#define PRO_E_STD_DRVD_VAR_FEATS 1625
#define PRO_E_DECK_AFT_SHEER 1626
#define PRO_E_COAMING_OPTION 1627
#define PRO_E_COAMING_SKETCH 1628
#define PRO_E_COAMING_SURFACE 1629
#define PRO_E_COPYTRIM_QUILT 1630
#define PRO_E_COPYTRIM_CURVES 1631
#define PRO_E_COPYTRIM_CURVE_TBL 1632
#define PRO_E_COPYTRIM_CURVE_DATA 1633
#define PRO_E_COPYTRIM_CURVE 1634
#define PRO_E_COMPARTMENT_ID 1635
#define PRO_E_COMPARTMENT_VOLUME 1636
#define PRO_E_HULL_BHD_SWEDGED_SEL_DIR 1637
#define PRO_E_HULL_BHD_CORRUGATED_SEL_DIR 1638
#define PRO_E_HULL_BHD_FILLET_RADIUS_1 1639
#define PRO_E_HULL_BHD_FILLET_RADIUS_2 1640
#define PRO_E_HULL_BHD_L_1 1641
#define PRO_E_HULL_BHD_L_2 1642
#define PRO_E_HULL_BHD_DIST_TO_SIDES 1643
#define PRO_E_HULL_BHD_PLN_OFFSET 1644
#define PRO_E_HULL_SECT_TYPE 1645
#define PRO_E_HULL_SECT_NAME 1646
#define PRO_E_FRM_CONST_Z 1647
#define PRO_E_FRM_START_X 1648
#define PRO_E_FRM_USER_X 1649
#define PRO_E_FRM_NORM_SURF 1650
#define PRO_E_SWP_ATTR 1651
#define PRO_E_SWP_INNER_SRF 1652
#define PRO_E_SWP_MERGE_ENDS 1653
#define PRO_E_SWP_BLN_SEC 1654
#define PRO_E_FRM_NORM_SURF_SIDE 1655
#define PRO_E_FRM_X_CHOICE_BTN 1656
#define PRO_E_FRM_Z_CHOICE_BTN 1657
#define PRO_E_SWP_SEC_PNT 1658
#define PRO_E_SWP_SEC_PNT_CHOICE 1659
#define PRO_E_SWP_SEC_PNT_REF 1660
#define PRO_E_HLE_FITTYPE 1661
#define PRO_E_HLE_DEPTH 1662
#define PRO_E_HLE_DRILLDEPTH 1663
#define PRO_E_HLE_UPTODEPTHREF 1664
#define PRO_E_STIFF_PLT_OFFST 1665
#define PRO_E_DECK_HULL_BREADTH 1666
#define PRO_E_DECK_HULL_LBP 1667
#define PRO_E_SPLIT_VOL_SEL 1668
#define PRO_E_SPLIT_GEOM_OPT 1669
#define PRO_E_HLE_HOLEID 1670
#define PRO_E_HLE_COM 1671
#define PRO_E_HLE_TYPE_NEW 1672
#define PRO_E_HLE_STAN_TYPE 1673
#define PRO_E_HLE_ADD_THREAD 1674
#define PRO_E_HLE_ADD_CBORE 1675
#define PRO_E_HLE_ADD_CSINK 1676
#define PRO_E_HLE_PLCMNT_PLANE 1677
#define PRO_E_HLE_REF_PLANE_1 1678
#define PRO_E_HLE_REF_ANG_1 1679
#define PRO_E_HLE_THRD_DEPTH 1680
#define PRO_E_GROUP_CE_UPDATE 1681
#define PRO_E_GROUP_CE_INDEPENDENT 1682
#define PRO_E_CMD_BLEND_TYPE 1683
#define PRO_E_HOLE_STD_DEPTH 1684
#define PRO_E_HOLE_DEPTH_FROM 1685
#define PRO_E_HOLE_DEPTH_TO 1686
#define PRO_E_HOLE_DEPTH_FROM_TYPE 1687
#define PRO_E_HOLE_DEPTH_TO_TYPE 1688
#define PRO_E_HLE_CRDIR_FLIP 1689
#define PRO_E_COAMING_FWD_DTM 1690
#define PRO_E_COAMING_AFT_DTM 1691
#define PRO_E_COAMING_FWD_VALUE 1692
#define PRO_E_COAMING_AFT_VALUE 1693
#define PRO_E_COAMING_PORT_VALUE 1694
#define PRO_E_COAMING_STBD_VALUE 1695
#define PRO_E_HULL_BHD_STOOL_SEL_PARAMS_1 1696
#define PRO_E_HULL_BHD_STOOL_SEL_PARAMS_2 1697
#define PRO_E_HULL_BHD_STOOL_UP_W1 1698
#define PRO_E_HULL_BHD_STOOL_UP_W2 1699
#define PRO_E_HULL_BHD_STOOL_LOW_W1 1700
#define PRO_E_HULL_BHD_STOOL_LOW_W2 1701
#define PRO_E_HULL_BHD_CORRUGATION_PARAMS 1702
#define PRO_E_HULL_BHD_CORRU_PARAMS_1 1703
#define PRO_E_HULL_BHD_CORRU_PARAMS_2 1704
#define PRO_E_HULL_BHD_CORRU_DIST_1 1705
#define PRO_E_HULL_BHD_CORRU_DIST_2 1706
#define PRO_E_HULL_BHD_SWEDGE_PARAMS 1707
#define PRO_E_HULL_BHD_SWEDGE_PARAMS_1 1708
#define PRO_E_HULL_BHD_SWEDGE_PARAMS_2 1709
#define PRO_E_HULL_BHD_TRANS_CORRUG_DIR 1710
#define PRO_E_HULL_BHD_LONGI_CORRUG_DIR 1711
#define PRO_E_HULL_BHD_TRANS_SWEDGE_DIR 1712
#define PRO_E_HULL_BHD_LONGI_SWEDGE_DIR 1713
#define PRO_E_CLASS_TYPE 1714
#define PRO_E_CLASS_SEL_CLASS 1715
#define PRO_E_CLASS_SEL_OPT_APPLY 1716
#define PRO_E_CLASS_SEL_OLD_CLASS 1717
#define PRO_E_CLASS_SEL_OLD_VALUE 1718
#define PRO_E_CLASS_SEL_OLD_CLASS_REM 1719
#define PRO_E_HULL_STD_HULL_CLASSIFICATION 1720
#define PRO_E_STIFF_ORNT_PLN 1721
#define PRO_E_HULL_ENDCUT_STIFFENERS 1722
#define PRO_E_HULL_ENDCUT_TABLE 1723
#define PRO_E_HULL_ENDCUT_TABLE_ELEMENTS 1724
#define PRO_E_HULL_ENDCUT_WEB_END1 1725
#define PRO_E_HULL_ENDCUT_WEB_END2 1726
#define PRO_E_HULL_ENDCUT_FLANGE_END1 1727
#define PRO_E_HULL_ENDCUT_FLANGE_END2 1728
#define PRO_E_HULL_ENDCUT_WEBEND1_OPTS 1729
#define PRO_E_HULL_ENDCUT_WEBEND2_OPTS 1730
#define PRO_E_HULL_ENDCUT_FLGEND1_OPTS 1731
#define PRO_E_HULL_ENDCUT_FLGEND2_OPTS 1732
#define PRO_E_PLATE_KNUCK_RAD_TAB 1733
#define PRO_E_PLATE_KNUCK_RAD_CMP 1734
#define PRO_E_PLATE_KNUCK_RAD_REF 1735
#define PRO_E_PLATE_KNUCK_RAD_VAL 1736
#define PRO_E_WLD_FLANGE_TRAJECT 1737
#define PRO_E_WLD_FLANGE_ALIGN 1738
#define PRO_E_WLD_FLANGE_ROT 1739
#define PRO_E_WLD_FLANGE_TYPE 1740
#define PRO_E_WLD_FLANGE_OFFSET 1741
#define PRO_E_WLD_FLANGE_GEOM 1742
#define PRO_E_WLD_FLANGE_ORIENT 1743
#define PRO_E_DSHARE_DEPENDENCY 1744
#define PRO_E_AUTO_BEND_EDGES 1745
#define PRO_E_COLLAR_CUTOUT_ARR 1746
#define PRO_E_COLLAR_CUTOUT_LIST 1747
#define PRO_E_COLLAR_CUTOUT_REF 1748
#define PRO_E_COLLAR_MODE 1749
#define PRO_E_COLLAR_IDFY 1750
#define PRO_E_COLLAR_STIFF_SIDE 1751
#define PRO_E_COLLAR_THICK 1752
#define PRO_E_COLLAR_PLATE_SIDE 1753
#define PRO_E_COLLAR_SEL 1754
#define PRO_E_DSHARE_COPY_DATUMS 1755
#define PRO_E_DSHARE_REFIT_DATUMS 1756
/* 1757 - 1764 Used by Brackets in J-01 is no longer in use */
#define PRO_E_REP_STRUCT_OBJ_IDENT 1765
#define PRO_E_FRSYS_PNT_X_REF 1766
#define PRO_E_FRSYS_PNT_Y_REF 1767
#define PRO_E_FRSYS_PNT_Z_REF 1768
#define PRO_E_FRSYS_PNT_X_OFFSET 1769
#define PRO_E_FRSYS_PNT_Y_OFFSET 1770
#define PRO_E_FRSYS_PNT_Z_OFFSET 1771
#define PRO_E_FRSYS_PNT_X_DIR 1772
#define PRO_E_FRSYS_PNT_Y_DIR 1773
#define PRO_E_FRSYS_PNT_Z_DIR 1774
#define PRO_E_SMT_WLD_SPLIT_ARR 1775
#define PRO_E_SMT_WLD_SPLIT_CMPND 1776
#define PRO_E_SMT_WLD_SPLIT_CHAIN 1777
#define PRO_E_SMT_WLD_SPLIT_DIR 1778
#define PRO_E_SMT_WLD_DRV_SRF_ARR 1779
#define PRO_E_SMT_WLD_DRV_SRF_SEL 1780
#define PRO_E_SMT_WLD_THICKNESS 1781
#define PRO_E_REP_STRUCT_OBJ_CPY_TYPE 1782
#define PRO_E_REP_STRUCT_OBJ_BASE_OBJ 1783
#define PRO_E_PLATE_SELQUILT_MULT 1784
#define PRO_E_CUSTOM_CYCLE 1785
#define PRO_E_SMT_HEM_TRAJECTORY 1786
#define PRO_E_SMT_HEM_SHAPE 1787
#define PRO_E_SMT_HEM_SECTION 1789
#define PRO_E_SMT_HEM_DIM1 1790
#define PRO_E_SMT_HEM_DIM2 1791
#define PRO_E_SMT_HEM_DIM3 1792
#define PRO_E_SMT_HEM_DIM4 1793
#define PRO_E_SMT_HEM_DIM5 1794
#define PRO_E_SMT_HEM_DIM6 1795
#define PRO_E_SMT_HEM_DIM7 1796
#define PRO_E_SMT_HEM_FLIP 1797
/* Bulk Feature */
#define PRO_E_BULK_FEAT_MSR_ARRAY 1798
#define PRO_E_BULK_FEAT_MSR 1799
#define PRO_E_BULK_TEMPLATE 1800
#define PRO_E_SMT_EXTRACT_ASM_NAME 1815
#define PRO_E_SMT_EXTRACT_SKEL_NAME 1816
#define PRO_E_UIE_SMT_EXTRACT_VOL_ARR 1817
#define PRO_E_SMT_EXTRACT_ONE_VOL 1818
#define PRO_E_SMT_EXTRACT_VOL_IDX 1819
#define PRO_E_SMT_EXTRACT_VOL_NAME 1820
#define PRO_E_SMT_EXTRACT_VOL_THICK 1821
#define PRO_E_COMPARTMENT_IDENTITY 1822
#define PRO_E_COMPARTMENT_ID_STRING 1823
#define PRO_E_COMPARTMENT_ID_SERIAL 1824
/* Folded Flange */
#define PRO_E_HULL_FOLDED_FLG_EDGE 1825
#define PRO_E_HULL_FOLDED_FLG_WIDTH 1826
#define PRO_E_HULL_FOLDED_FLG_ANGLE 1827
#define PRO_E_HULL_FOLDED_FLG_RADIUS 1828
#define PRO_E_HULL_FOLDED_FLG_END1_SETBACK 1829
#define PRO_E_HULL_FOLDED_FLG_END2_SETBACK 1830
#define PRO_E_HULL_FOLDED_FLG_COMPOUND 1831
#define PRO_E_HULL_FOLDED_FLG_FLIP 1832
#define PRO_E_RIBBON_BASE_CRV 1833
#define PRO_E_RIBBON_REF_CRV 1834
#define PRO_E_RIBBON_WIDTH 1835
/* DS Optimization Feature */
#define PRO_E_DS_OPTIM_NAME 1836
#define PRO_E_DS_OPTIM_DEF 1837
#define PRO_E_DS_OPTIM_REG_REQUEST 1838
#define PRO_E_RIB_START 1839
#define PRO_E_RNDSET_AMBIGUITY 1840
#define PRO_E_HULL_BHD_FWDSKETCH_PLANE 1841
#define PRO_E_HULL_BHD_SECTION_NUM 1842
#define PRO_E_COAMING_FILLET_VALUE1 1843
#define PRO_E_WLD_FLANGE_CENTER 1844
#define PRO_E_CUTOUT_COLLAR_IDFY 1845
#define PRO_E_CUTOUT_COLLAR_MODE 1846
#define PRO_E_COAMING_FILLET_VALUE2 1847
#define PRO_E_COAMING_STANDARD 1848
#define PRO_E_PLATE_SELQUILT_SINGLE 1849
#define PRO_E_FRSYS_PNT_NAME 1850
#define PRO_E_COLLAR_PIECE 1851
#define PRO_E_STOBJ_CUTOUT_EDGE 1852
#define PRO_E_WLD_FLANGE_IDENTIFY 1853
#define PRO_E_WLD_PREP_DEPENDENCY 1854
#define PRO_E_STIFF_DEF_COLLAR 1855
#define PRO_E_REP_STRUCT_OBJ_PREFIX 1856
#define PRO_E_COAMING_OPENING 1857
#define PRO_E_LOC_MACH_AREA 1858
/* bracket related */
#define PRO_E_BKT_GEOM_PG 1859
#define PRO_E_BKT_GEOM_OPT 1860
#define PRO_E_BKT_DIM_OPT 1861
#define PRO_E_BKT_FAM_GENIRICSEL 1862
#define PRO_E_BKT_FAM_SEC_SEL 1863
#define PRO_E_BKT_PLACE_PG 1864
#define PRO_E_BKT_CON_OBJ_1 1865
#define PRO_E_BKT_CON_OBJ_2 1866
#define PRO_E_BKT_CON_OBJ_3 1867
#define PRO_E_BKT_CON_OBJ_4 1868
#define PRO_E_BKT_INS_PLN 1869
#define PRO_E_BKT_OFFSET_VAL 1870
#define PRO_E_BKT_NAME_THK_PG 1871
#define PRO_E_BKT_THK_VAL 1872
#define PRO_E_BKT_QUADR_FLIP_OPT 1873
#define PRO_E_BKT_FLANGE_MAIN_PG 1874
#define PRO_E_BKT_FLANGE_OPT 1875
#define PRO_E_BKT_FLANGE_DIR 1876
#define PRO_E_BKT_FLANGE_WIDTH 1877
#define PRO_E_BKT_BEND_RADIUS 1878
#define PRO_E_BKT_FLANGE_ANGLE 1879
#define PRO_E_BKT_FLG_END1_SETBACK 1880
#define PRO_E_BKT_FLG_END2_SETBACK 1881
#define PRO_E_BKT_FLANGE_CUT_PG1 1882
#define PRO_E_BKT_ENDCUT_FLGEND1_OPTS 1883
#define PRO_E_BKT_FLANGE_CUT_PG2 1884
#define PRO_E_BKT_ENDCUT_FLGEND2_OPTS 1885
/* hull block */
#define PRO_E_BLKDEF_LONG_PLN 1886
#define PRO_E_BLKDEF_TRAV_PLN 1887
#define PRO_E_BLKDEF_HORIZ_PLN 1888
#define PRO_E_HULL_ASSEM_COPY_SEL_ASM 1889
#define PRO_E_HULL_ASSEM_COPY_SEL_COMP 1890
#define PRO_E_HULL_ASSEM_COPY_CUR_EXTREF 1891
#define PRO_E_HULL_ASSEM_COPY_SEL_EXTREF 1892
#define PRO_E_HULL_ASM_COPY_PART_NAME 1893
#define PRO_E_HULL_ASM_COPY_PNAME_IP 1894
#define PRO_E_COLLAR_NAME 1895
/* asagarwa added for weld. */
#define PRO_E_HULL_WELD_GEOM 1896
#define PRO_E_HULL_WELD_TYPE 1897
#define PRO_E_HULL_WELD_CODE 1898
#define PRO_E_HULL_BEVEL_CODE 1899
#define PRO_E_HULL_WELD_PRIMARY_OBJ 1900
#define PRO_E_HULL_WELD_LIST_PRI_OBJ 1901
#define PRO_E_HULL_WELD_SECONDARY_OBJ 1902
#define PRO_E_HULL_WELD_OPENING 1903
#define PRO_E_HULL_WELD_FLIP 1904
#define PRO_E_HULL_WELD_POSITION 1905
#define PRO_E_HULL_WELD_NAME 1906
#define PRO_E_BULK_PARAMS_ARRAY 1907
#define PRO_E_BULK_ONE_PARAM 1908
#define PRO_E_BULK_PARAM_TYPE 1909
#define PRO_E_BULK_PARAM_VAL 1910
#define PRO_E_BULK_PARAM_INT_VAL 1911
#define PRO_E_BULK_PARAM_REAL_VAL 1912
#define PRO_E_BULK_PARAM_WSTRING_VAL 1913
#define PRO_E_BULK_PARAM_BOOL_VAL 1914
#define PRO_E_BULK_PARAM_REF 1915
#define PRO_E_ROUTE_EXTEND_MAINREF 1916
#define PRO_E_ROUTE_SETSTART_MAINREF 1917
#define PRO_E_HULL_NOTCH_CODE_OPTIONLIST 1918
#define PRO_E_HULL_NOTCH_FLIP_OPTION 1919
#define PRO_E_HULL_NOTCH_WELD_SEL_LIST 1920
#define PRO_E_HULL_NOTCH_ASSEMBLY_SEL 1921
#define PRO_E_WLD_ASM_NOTCH_REF_FT 1922
#define PRO_E_WLD_ASM_NOTCH_TYPE 1923
#define PRO_E_WLD_ASM_NOTCH_DIMS 1924
#define PRO_E_WLD_ASM_NOTCH_SEC 1925
#define PRO_E_WLD_ASM_NOTCH_TRAJ 1926
#define PRO_E_WLD_ASM_NOTCH_ORIENT 1927
#define PRO_E_BLKDEF_BOUNDARY 1928
#define PRO_E_CUTOUT_CR_PROFILE 1929
#define PRO_E_CUTOUT_ORIENT 1930
#define PRO_E_DRVD_VAR_SHRINK 1931
#define PRO_E_SMT_BNDTBL_ASSIGN 1932
#define PRO_E_SMT_BNDTBL_SRCOPT 1933
#define PRO_E_SMT_BNDTBL_PATH 1934
#define PRO_E_SMT_SHARPSTOBEND 1935
#define PRO_E_SMT_USERADIUS 1936
#define PRO_E_SMT_ATT_EDGE 1937
#define PRO_E_SMT_BENDTBL 1938
#define PRO_E_SMT_BEND_RELIEF_SIDE1 1939
#define PRO_E_SMT_BEND_RELIEF_SIDE2 1940
#define PRO_E_SMT_BEND_RELIEF 1941
#define PRO_E_SMT_BEND_ANGLE 1942
#define PRO_E_SMT_BEND_RADIUS 1943
#define PRO_E_SMT_BEND_RAD_TYPE 1944
#define PRO_E_SMT_BEND_RAD_VALUE 1945
#define PRO_E_BEND_RELIEF_TYPE 1946
#define PRO_E_BEND_RELIEF_WIDTH 1947
#define PRO_E_BEND_RELIEF_DEPTH 1948
#define PRO_E_BEND_RELIEF_ANGLE 1949
#define PRO_E_SMT_KEEP_WALL_HEIGHT 1950
/* Mold Slider Feature */
#define PRO_E_REF_PART_SEL 1951
#define PRO_E_DEFAULT_DIR 1952
#define PRO_E_CUSTOM_DIR 1953
#define PRO_E_SLIDER_CLASS 1954
#define PRO_E_PROJ_PLANE_SEL 1955
#define PRO_E_EXT_SURF_CUT_SOLID_TYPE 1956
#define PRO_E_FORM_PLACE 1957
#define PRO_E_FORM_BOUND 1958
#define PRO_E_FORM_SEED 1959
#define PRO_E_FORM_SIDE 1960
#define PRO_E_FORM_EXCL_SRF 1961
#define PRO_E_FORM_CSYS 1962
#define PRO_E_FORM_TOOLNAME 1963
#define PRO_E_STD_FEATURE_NAME 1964
#define PRO_E_RIB_THICKNESS 1965
#define PRO_E_PLATE_EXTEND_TAB 1966
#define PRO_E_PLATE_EXTEND_TAB_CMP 1967
#define PRO_E_PLATE_CONST_OPTION 1968
#define PRO_E_PAD_PILLAR_SEL_PG 1969
#define PRO_E_PAD_PILLAR_SEL 1970
#define PRO_E_PAD_GEOM_PG 1971
#define PRO_E_PAD_HT 1972
#define PRO_E_PAD_WIDTH 1973
#define PRO_E_PAD_THK 1974
#define PRO_E_PAD_BOT_OPT 1975
#define PRO_E_PAD_TOP_OPT 1976
#define PRO_E_TOP_PAD_HT 1977
#define PRO_E_TOP_PAD_WIDTH 1978
#define PRO_E_TOP_PAD_THK 1979
#define PRO_E_RED_END_OPT 1980
#define PRO_E_TOP_PAD_SEC_SUB_PG 1981
#define PRO_E_PAD_NAME_PG 1982
/* Mold Tangent Draft Feature */
#define PRO_E_PULL_DIR_OPTS 1983
#define PRO_E_PULL_DIR_SEL 1984
#define PRO_E_PULL_DIR_FLIP 1985
#define PRO_E_TANDFT_MATERIAL 1986
#define PRO_E_TANDFT_GEOMETRY 1987
#define PRO_E_TANDFT_SIDE 1988
#define PRO_E_TANDFT_DRAFT_LINE_SEL 1989
#define PRO_E_TANDFT_PART_SURF_SEL 1990
#define PRO_E_TANDFT_DRAFT_ANGLE 1991
#define PRO_E_TANDFT_DRAFT_RADIUS 1992
#define PRO_E_TANDFT_CLOSING_SURFACES 1993
#define PRO_E_TANDFT_CAP_ANGLE 1994
#define PRO_E_TANDFT_CURVE_CONTROL 1995
#define PRO_E_TANDFT_SPINE_CURVES 1996
#define PRO_E_TANDFT_TYPE 1997
#define PRO_E_FRCRVS_REF_QUILT 1998
#define PRO_E_FRCRVS_REF_FRSYS 1999
#define PRO_E_FRCRVS_PREFIX 2000
/* new elements for pad */
#define PRO_E_PAD_SEC_SUB_PG 2001
#define PRO_E_PAD_TOP_NAME_PG 2002
#define PRO_E_PAD_CORN_RAD 2003
#define PRO_E_TOP_PAD_CORN_RAD 2004
#define PRO_E_CUTOUT_PLATE_REF 2005
#define PRO_E_CUTOUT_PLATE_OBJLIST 2006
#define PRO_E_CUTOUT_PLATE_OBJLIST_REF 2007
#define PRO_E_COLLAR_IDENTIFY 2008
#define PRO_E_HULL_PART_NAME 2009
#define PRO_E_DRVD_VAR_REFS 2010
#define PRO_E_HULL_MITRE_SEL_FIRST 2011
#define PRO_E_HULL_MITRE_SEL_SECOND 2012
#define PRO_E_HULL_MITRE_JOINT_TYPE 2013
#define PRO_E_WLD_PREP_GEOMTYPE 2014
#define PRO_E_DTMAXIS_CONSTRAINTS 2015
#define PRO_E_DTMAXIS_CONSTRAINT 2016
#define PRO_E_DTMAXIS_CONSTR_TYPE 2017
#define PRO_E_DTMAXIS_CONSTR_REF 2018
#define PRO_E_DTMAXIS_DIM_CONSTRAINTS 2019
#define PRO_E_DTMAXIS_DIM_CONSTRAINT 2020
#define PRO_E_DTMAXIS_DIM_CONSTR_REF 2021
#define PRO_E_DTMAXIS_DIM_CONSTR_VAL 2022
#define PRO_E_REMOVE_MATERIAL 2023
#define PRO_E_AUTO_BEND_NOTES 2024
#define PRO_E_RNDCH_SETS 2101
#define PRO_E_RNDCH_SET 2102
#define PRO_E_RNDCH_DIMENSIONAL_SCHEMA 2103
#define PRO_E_RNDCH_REFERENCE_SURFACE 2104
#define PRO_E_RNDCH_REFERENCE_EDGES 2105
#define PRO_E_RNDCH_LEG1 2106
#define PRO_E_RNDCH_LEG2 2107
#define PRO_E_RNDCH_LEG_TYPE 2108
#define PRO_E_RNDCH_LEG_VALUE 2109
#define PRO_E_RNDCH_REFERENCE_EDGE 2110
#define PRO_E_RNDCH_REFERENCE_POINT 2111
#define PRO_E_RNDCH_ATTACH_ATTR 2112
#define PRO_E_RNDCH_TRANSITIONS 2113
#define PRO_E_RNDCH_TRANSITION 2114
#define PRO_E_RNDCH_TRANS_REFERENCES 2115
#define PRO_E_RNDCH_TRANS_TYPE 2116
#define PRO_E_RNDCH_TRANS_PATCH_RAD_OPT 2117
#define PRO_E_RNDCH_TRANS_CAP 2118
#define PRO_E_RNDCH_CONIC_TYPE 2119
#define PRO_E_RNDCH_CONIC_VALUE 2120
#define PRO_E_RNDCH_REFERENCES 2121
#define PRO_E_RNDCH_RADIUS 2122
#define PRO_E_RNDCH_RADII 2123
#define PRO_E_STD_CURVE_COLLECTION_APPL 2124
#define PRO_E_SECT_USE_SKETCH 2125 /* Obsolete */
#define PRO_E_SURF_EXTEND_CHAIN_OF_EDGES 2126
#define PRO_E_SURF_EXTEND_TYPE 2127
#define PRO_E_SURF_EXTEND_DIST_STATE 2128
#define PRO_E_SURF_EXTEND_WAY_OF_MEASURING 2129
#define PRO_E_SURF_EXTEND_REFER_PLANE 2130
#define PRO_E_SURF_EXTEND_SINGLE_DIST_VALUE 2131
#define PRO_E_SURF_EXTEND_START_COND 2132
#define PRO_E_SURF_EXTEND_END_COND 2133
#define PRO_E_CSYS_ORIGIN_CONSTRS 2134
#define PRO_E_CSYS_ORIGIN_CONSTR 2135
#define PRO_E_CSYS_ORIGIN_CONSTR_REF 2136
#define PRO_E_CSYS_ORIENTMOVES 2137
#define PRO_E_CSYS_ORIENTMOVE 2138
/*unused: 2139, 2146 */
#define PRO_E_CSYS_ORIENTMOVE_MOVE_TYPE 2140
#define PRO_E_CSYS_ORIENTMOVE_MOVE_VAL 2141
#define PRO_E_CSYS_ORIENTSELAXIS1_REF 2142
#define PRO_E_CSYS_ORIENTSELAXIS1_OPT 2143
#define PRO_E_CSYS_ORIENTSELAXIS2_REF 2144
#define PRO_E_CSYS_ORIENTSELAXIS2_OPT 2145
#define PRO_E_CSYS_OFFSET_TYPE 2147
#define PRO_E_DRAFT_NEUTRAL_OBJECT 2148
#define PRO_E_DRAFT_DRAFTED_SURFACES 2149
#define PRO_E_DRAFT_CONSTANT_OR_VARIABLE 2150
#define PRO_E_DRAFT_ANGLE 2151
#define PRO_E_DRAFT_DIRECTION_REF_OBJECT 2152
#define PRO_E_DRAFT_TWEAK_OR_INTERSEC 2153
#define PRO_E_DRAFT_SPLIT 2154
#define PRO_E_DRAFT_SECOND_NEURAL_OBJECT 2155
#define PRO_E_DRAFT_SPLIT_SURFACE 2156
#define PRO_E_DRAFT_SPLIT_GEOM PRO_E_DRAFT_SPLIT_SURFACE
#define PRO_E_DRAFT_NEED_SECOND_NEUT 2157
#define PRO_E_DRAFT_ONE_SIDE 2158
#define PRO_E_DRAFT_DEPENDENT 2159
#define PRO_E_DRAFT_SEC_ANGLE 2160
#define PRO_E_DRAFT_NEURAL_OBJECT_TYPE 2161 /* FB_ADD */
#define PRO_E_DRAFT_NEUTRAL_PLANE 2162 /* FB_ADD */
#define PRO_E_DRAFT_NEUTRAL_CURVE 2163 /* FB_ADD */
#define PRO_E_DRAFT_SIDE_1 2164 /* FB_ADD */
#define PRO_E_DRAFT_NEUTRAL_OBJECT_TYPE 2165 /* FB_ADD */
#define PRO_E_DRAFT_SIDE_2 2166 /* FB_ADD */
#define PRO_E_DRAFT_NEUTRAL_OBJECT_TYPE_1 2167
#define PRO_E_DRAFT_ANGLE_1 2168
#define PRO_E_DRAFT_NEUTRAL_PLANE_1 2169
#define PRO_E_DRAFT_NEUTRAL_CURVE_1 2170
#define PRO_E_DRAFT_DEPENDENT_1 2171
#define PRO_E_DRAFT_NEUTRAL_OBJECT_TYPE_2 2172
#define PRO_E_DRAFT_ANGLE_2 2173
#define PRO_E_DRAFT_NEUTRAL_PLANE_2 2174
#define PRO_E_DRAFT_NEUTRAL_CURVE_2 2175
#define PRO_E_DRAFT_DEPENDENT_2 2176
#define PRO_E_RNDCH_COMPOUND_CONIC 2177
#define PRO_E_RNDCH_SHAPE_OPTIONS 2178
#define PRO_E_RNDCH_REFERENCE_TYPE 2179
#define PRO_E_RNDCH_REFERENCE_SURFACE2 2180
#define PRO_E_RNDCH_REFERENCE_EDGE1 2181
#define PRO_E_RNDCH_REFERENCE_EDGE2 2182
#define PRO_E_RNDCH_REPLACE_SURFACE 2183
#define PRO_E_RNDCH_RAD_CURVE 2184
#define PRO_E_RNDCH_AUTO_BLEND 2185
#define PRO_E_RNDCH_COMPOUND_EXT_OPTIONS 2186
#define PRO_E_RNDCH_TERM_SURFACE 2187
#define PRO_E_RNDCH_BALL_SPINE 2188
#define PRO_E_RNDCH_VARIABLE_RADIUS 2189
#define PRO_E_RNDCH_COMPOUND_SPINE 2190
#define PRO_E_RNDCH_SPINE_CHAIN 2191
#define PRO_E_RNDCH_SPINE_CURVE 2192
#define PRO_E_RNDCH_REFERENCE_SURFACE1 2193
#define PRO_E_SHELL_FLIP 2194
#define PRO_E_SEC_USE_SKETCH 2195
#define PRO_E_RIB_SIDE_OPTS 2196
#define PRO_E_STD_POINT_COLLECTION_APPL 2197
#define PRO_E_SURF_EXTEND_VAR_DIST_POINT_ARRAY 2198
#define PRO_E_SURF_EXTEND_POINT_DIST_COMPOUND 2199
#define PRO_E_SURF_EXTEND_REF_POINT 2200
#define PRO_E_SURF_EXTEND_DIST_TYPE 2201
#define PRO_E_SURF_EXTEND_REF_EDGE_1 2202
#define PRO_E_SURF_EXTEND_DIST_VALUE_1 2203
#define PRO_E_SURF_EXTEND_DIST_1_COMPOUND 2204
#define PRO_E_SURF_EXTEND_REF_EDGE_2 2205
#define PRO_E_SURF_EXTEND_DIST_VALUE_2 2206
#define PRO_E_SURF_EXTEND_DIST_2_COMPOUND 2207
#define PRO_E_SURF_EXTEND_START_REF_EDGE 2208
#define PRO_E_SURF_EXTEND_END_REF_EDGE 2209
#define PRO_E_SURF_EXTEND_START_COND_COMPOUND 2210
#define PRO_E_SURF_EXTEND_END_COND_COMPOUND 2211
#define PRO_E_SURF_EXTEND_FLIP 2212
#define PRO_E_STD_SURF_COLLECTION_APPL 2213
#define PRO_E_SRF_COPY_TYPE 2214
#define PRO_E_STD_SEGM_COLLECTION_APPL 2215
#define PRO_E_HULL_WELD_FILLET_PARAMS 3000
#define PRO_E_HULL_WELD_OFFSET 3001
#define PRO_E_HULL_WELD_SPACE 3002
#define PRO_E_HULL_WELD_LENGTH 3003
#define PRO_E_HULL_WELD_LEG_1 3004
#define PRO_E_HULL_WELD_LEG_2 3005
#define PRO_E_HULL_WELD_BUTT_PARAMS 3006
#define PRO_E_HULL_WELD_GAP 3007
#define PRO_E_HULL_WELD_CAP_TOP 3008
#define PRO_E_HULL_WELD_CAP_BOT 3009
#define PRO_E_WIND_OFFSET 3010
#define PRO_E_WIND_INSIDE_LOOPS 3011
#define PRO_E_MIRRGEOM_SELECT_PLAIN 3012
#define PRO_E_AREA_OFS_TYPE 3013
#define PRO_E_AREA_OFS_AREA_TYPE 3014
#define PRO_E_AREA_OFS_SURF 3015
#define PRO_E_AREA_OFS_PROJ_TYPE 3016
#define PRO_E_AREA_OFS_USING_SLD_OR_QLT 3017
#define PRO_E_AREA_OFS_TRANS_DIR_REF 3018
#define PRO_E_AREA_OFS_CSYS_AXIS 3019
#define PRO_E_AREA_OFS_EXCL_LOOP 3020
#define PRO_E_AREA_OFS_PROF_TYPE 3021
#define PRO_E_AREA_OFS_BEVEL_ANGLE 3022
#define PRO_E_PATCH_QUILT 3023
#define PRO_E_PATCH_TYPE 3024
#define PRO_E_PATCH_MATERIAL_SIDE 3025
#define PRO_E_SRF_TR_SURF_SELECTION 3026
#define PRO_E_SRF_TR_MOVE_TYPE 3027
#define PRO_E_SRF_TR_VAL_ELEM 3028
#define PRO_E_DPOINT_POINTS_ARRAY 3029
#define PRO_E_DPOINT_POINT 3030
#define PRO_E_DPOINT_POINT_NAME 3031
#define PRO_E_DPOINT_PLA_CONSTRAINTS 3032
#define PRO_E_DPOINT_PLA_CONSTRAINT 3033
#define PRO_E_DPOINT_PLA_CONSTR_REF 3034
#define PRO_E_DPOINT_PLA_CONSTR_TYPE 3035
#define PRO_E_DPOINT_PLA_CONSTR_VAL 3036
#define PRO_E_DPOINT_DIM_CONSTRAINTS 3037
#define PRO_E_DPOINT_DIM_CONSTRAINT 3038
#define PRO_E_DPOINT_DIM_CONSTR_REF 3039
#define PRO_E_DPOINT_DIM_CONSTR_TYPE 3040
#define PRO_E_DPOINT_DIM_CONSTR_VAL 3041
#define PRO_E_RNDCH_ATTACH_TYPE 3042
#define PRO_E_PATTERN_METHOD 3043
#define PRO_E_PATTERN_SECTION 3044
#define PRO_E_PATTERN_TEMPLATE 3045
#define PRO_E_PATTERN_SPACING 3046
#define PRO_E_PATTERN_ALLOWANCE 3047
#define PRO_E_PATTERN_SKIP_ID 3048
#define PRO_E_PATTERN_RADIUS_INC 3049
#define PRO_E_CSYS_ORIENT_BY_METHOD 3050
#define PRO_E_CSYS_TYPE_MECH 3051
#define PRO_E_CSYS_ORIENTSELAXIS1_FLIP 3052
#define PRO_E_CSYS_ORIENTSELAXIS2_FLIP 3053
#define PRO_E_CSYS_NORMAL_TO_SCREEN 3054
#define PRO_E_CTRL_PTS_SETS 3055
#define PRO_E_CTRL_PTS_SETHOLDER 3056
#define PRO_E_CTRL_PTS_REFHOLDER 3057
#define PRO_E_STD_CHAIN_HOLDER 3058
#define PRO_E_OFFSET_FEATURE_TYPE 3059
#define PRO_E_DRVD_ATTRIBUTES 3060
#define PRO_E_DRVD_DETAIL_ITEM 3061
#define PRO_E_CRV_IP_REF_TYPE 3062
#define PRO_E_CRV_IP_REF1 3063
#define PRO_E_CRV_IP_REF2 3064
#define PRO_E_CRV_IP_COMP_SEC1 3065
#define PRO_E_CRV_IP_COMP_SEC2 3066
#define PRO_E_CRV_IP_REF_SEL1_TYPE 3067
#define PRO_E_CRV_IP_REF_SEL2_TYPE 3068
#define PRO_E_CRV_IP_COMP_REF1 3069
#define PRO_E_CRV_IP_COMP_REF2 3070
#define PRO_E_CRV_TRIM_SPLIT_SIDE 3071
#define PRO_E_CRV_TRIM_SPLIT_CURVE 3072
#define PRO_E_CRV_TRIM_DIVIDER 3073
#define PRO_E_CRV_WRAP_SRF_TYPE 3074
#define PRO_E_CRV_WRAP_SRF 3075
#define PRO_E_CRV_COMPST_CRV_TYPE 3076
#define PRO_E_CRV_PROJ_TYPE 3077
#define PRO_E_CRV_PROJCRV_TYPE 3078
#define PRO_E_CRV_PROJ_SKETCH_DIR_TYPE 3079
#define PRO_E_CRV_PROJ_SEL_DIR_TYPE 3080
#define PRO_E_CRV_OFFS_FEAT_TYPE 3081
#define PRO_E_CRV_OFFS_CRV_REF 3082
#define PRO_E_CRV_OFFS_SRF_REF 3083
#define PRO_E_CRV_OFFS_DIR_FLIP 3084
#define PRO_E_CRV_OFFS_GRAPH_REF 3085
#define PRO_E_CRV_OFFS_ST_END 3086
#define PRO_E_SURF_TRIM_TYPE 3087
#define PRO_E_PRIMARY_QLTSIDE 3088
#define PRO_E_THIN_QLT_SIDE 3089
#define PRO_E_THIN_TRIM_OPT 3090
#define PRO_E_KEEP_TRIM_SURF_OPT 3091
#define PRO_E_THICKEN_TYPE 3092
#define PRO_E_RNDCH_TRANS_SPHERE_RADIUS 3093
#define PRO_E_RNDCH_TRANS_LEG1_VALUE 3094
#define PRO_E_RNDCH_TRANS_LEG2_VALUE 3095
#define PRO_E_RNDCH_TRANS_LEG3_VALUE 3096
#define PRO_E_RNDCH_TRANS_SPHERE_DATA 3097
#define PRO_E_RNDCH_TRANS_PATCH_REF_SURF 3098
#define PRO_E_RNDCH_TRANS_ARC_RADIUS 3099
#define PRO_E_RNDCH_TRANS_PATCH_DATA 3100
#define PRO_E_RNDCH_TRANS_STOP_DATA 3101
#define PRO_E_RNDCH_TRANS_STOP_CAP 3102
#define PRO_E_RNDCH_TRANS_STOP_REF_TYPE 3103
#define PRO_E_RNDCH_TRANS_STOP_REFERENCE 3104
#define PRO_E_RNDCH_TRANS_RADIUS_OPTIONS 3105
#define PRO_E_RNDCH_TRANS_LEG1_OPTIONS 3106
#define PRO_E_RNDCH_TRANS_LEG2_OPTIONS 3107
#define PRO_E_RNDCH_TRANS_LEG3_OPTIONS 3108
#define PRO_E_RIB_SECTION_COMP 3109
#define PRO_E_HLE_ADD_EXIT_CSINK 3110
#define PRO_E_HLE_EXIT_CSINKDIAM 3111
#define PRO_E_HLE_EXIT_CSINKANGLE 3112
#define PRO_E_DPOINT_OFST_CSYS_TYPE 3113
#define PRO_E_DPOINT_OFST_CSYS_REF 3114
#define PRO_E_DPOINT_OFST_CSYS_WITH_DIMS 3115
#define PRO_E_DPOINT_OFST_CSYS_PNT_NAME 3116
#define PRO_E_DPOINT_OFST_CSYS_DIR1_VAL 3117
#define PRO_E_DPOINT_OFST_CSYS_DIR2_VAL 3118
#define PRO_E_DPOINT_OFST_CSYS_DIR3_VAL 3119
#define PRO_E_DPOINT_OFST_CSYS_PNT 3120
#define PRO_E_DPOINT_OFST_CSYS_PNTS_ARRAY 3121
#define PRO_E_DPOINT_FIELD_REF 3122
#define PRO_E_DTMPLN_FLIP_DIR 3123
#define PRO_E_GENPAT_TYPE 3124
#define PRO_E_GENPAT_DIM 3125
#define PRO_E_GENPAT_TABLE 3126
#define PRO_E_GENPAT_REF 3127
#define PRO_E_GENPAT_FILL 3128
#define PRO_E_GENPAT_DIR 3129
#define PRO_E_GENPAT_AXIS 3130
#define PRO_E_GENPAT_REGEN_METHOD 3131
#define PRO_E_GENPAT_REF_TYPE 3132
#define PRO_E_GENPAT_DIM_FIRST_DIR 3133
#define PRO_E_GENPAT_DIM_FIRST_DIR_NUM_INST 3134
#define PRO_E_GENPAT_DIM_SECOND_DIR 3135
#define PRO_E_GENPAT_DIM_SECOND_DIR_NUM_INST 3136
#define PRO_E_GENPAT_DIM_DIR_COMPOUND 3137
#define PRO_E_GENPAT_DIR_DIMENSION 3138
#define PRO_E_GENPAT_DIR_VAR_TYPE 3139
#define PRO_E_GENPAT_DIR_VAR_VALUE 3140
#define PRO_E_GENPAT_RELATION_EDIT 3141
#define PRO_E_GENPAT_FILL_SKETCH 3142
#define PRO_E_GENPAT_FILL_TEMPLATE_TYPE 3143
#define PRO_E_GENPAT_FILL_SPACING 3144
#define PRO_E_GENPAT_FILL_BORDERING 3145
#define PRO_E_GENPAT_FILL_RADIUS_INC 3146
#define PRO_E_GENPAT_TABLE_DIMS 3147
#define PRO_E_GENPAT_TABLE_DIM_ENTRY 3148
#define PRO_E_GENPAT_TABLE_DIM 3149
#define PRO_E_GENPAT_TABLE_LIST 3150
#define PRO_E_GENPAT_TABLE_ENTRY 3151
#define PRO_E_GENPAT_TABLE_NAME 3152
#define PRO_E_GENPAT_TABLE_EDIT 3153
#define PRO_E_GENPAT_TABLE_READ 3154
#define PRO_E_GENPAT_TABLE_WRITE 3155
#define PRO_E_GENPAT_TABLE_SET_ACTIVE 3156
#define PRO_E_DRAFT_ANGLES 3157
#define PRO_E_DRAFT_ANG_PNT 3158
#define PRO_E_DRVD_VAR_PARAMS 3159
#define PRO_E_RNDCH_AMBIGUITY 3160
#define PRO_E_MIRROR_REF_ITEMS 3161
#define PRO_E_MIRROR_REF_PLANE 3162
#define PRO_E_COPY_NO_COPY 3163
#define PRO_E_SWEEP_PROF_COMP 3164
#define PRO_E_SWEEP_FRAME_COMP 3165
#define PRO_E_TANDFT_TANGENT_TO 3166
#define PRO_E_CSYS_ORIENTSELAXIS1_REF_OPT 3167
#define PRO_E_CSYS_ORIENTSELAXIS2_REF_OPT 3168
#define PRO_E_GENPAT_FILL_ROT_ANG 3169
#define PRO_E_BBL_APPENDIX 3170
#define PRO_E_RNDCH_CONIC_DEP_OPT 3171
#define PRO_E_FRM_TRAJS_APPENDIX 3172
#define PRO_E_CRV_WRAP_FLIP 3173
#define PRO_E_CRV_WRAP_COORD_SYS 3174
#define PRO_E_BBL_ADD_CLOSED 3175
#define PRO_E_FEAT_FORM_IS_THIN 3176
#define PRO_E_DRAFT_INCLUDE_TANGENT 3177
#define PRO_E_DRAFT_SKETCHER 3178
#define PRO_E_DPOINT_TYPE 3179
#define PRO_E_SURFACE_SIDE 3180
#define PRO_E_SURF_FLIP_NORMAL 3181
#define PRO_E_SRF_TRANS_TYPE 3182
#define PRO_E_CRV_PROJ_CURVES 3183
#define PRO_E_RNDCH_CHAMFER_SHAPE 3184
#define PRO_E_CRV_PROJ_FOLLOW_SRF_OPT 3185
#define PRO_E_POCKET_NUMBER 3186
#define PRO_E_CUT_MOTION_SUB_TYPE 3187
#define PRO_E_THRDMILL_THREAD_METHOD 3188
#define PRO_E_THRDMILL_CUT_STYLE 3189
#define PRO_E_THRDMILL_PICKUP_OVERLAP 3190
#define PRO_E_THRDMILL_THREAD_OVERLAP 3191
#define PRO_E_THRDMILL_ANGULAR_OVERLAP 3192
#define PRO_E_THRDMILL_HOLESET_INFO 3193
#define PRO_E_HLE_PLC_ALIGN_OPT1 3194
#define PRO_E_HLE_PLC_ALIGN_OPT2 3195
#define PRO_E_MOVE_WITH_COPY 3196
#define PRO_E_TRAJECTORY_CURVE 3197
#define PRO_E_TRAJECTORY_CURVE_FEAT 3198
#define PRO_E_WLD_PREP_DIM_ATTACH 3199
#define PRO_E_HOLESET_TIP_CTRL_PNT 3200
#define PRO_E_DTMAXIS_FIT 3201
#define PRO_E_DTMAXIS_FIT_TYPE 3202
#define PRO_E_DTMAXIS_FIT_REF 3203
#define PRO_E_DTMAXIS_FIT_LEN 3204
#define PRO_E_NCSEQ_ADAPTER 3205
#define PRO_E_SHRINK_FORMULA 3207
#define PRO_E_SHRINK_SEL_CSYS 3208
#define PRO_E_SHRINK_FACTOR_X 3209
#define PRO_E_SHRINK_FACTOR_Y 3210
#define PRO_E_SHRINK_FACTOR_Z 3211
#define PRO_E_SHRINK_FORWARD 3212
#define PRO_E_SHRINK_BY_DIM_SHRINK_FORMULA 3213
#define PRO_E_SHRINK_ALL_DIM 3214
#define PRO_E_SHRINK_DIMENSIONS 3215
#define PRO_E_SHRINK_BY_DIM_AFTER_BEFORE 3216
#define PRO_E_FEAT_FORM_ALWAYS_THIN 3217
#define PRO_E_SRF_TRIM_TYPE 3218
#define PRO_E_ANNOT_ELEM_NAME 3219
#define PRO_E_ANNOTATION_TYPE 3220
#define PRO_E_ANNOTATION_ID 3221
#define PRO_E_ANNOT_ELEM_REFERENCE_TYPE 3222 /* Obsolete */
#define PRO_E_ANNOT_ELEM_SINGLE_REF 3223
#define PRO_E_ANNOT_ELEM_STRONG_REF_FLAG 3224
#define PRO_E_ANNOT_ELEM_REFERENCE 3225
#define PRO_E_ANNOT_ELEM_REFERENCES 3226
#define PRO_E_ANNOTATION 3227
#define PRO_E_ANNOT_ELEM_COPY_FLAG 3228
#define PRO_E_ANNOT_ELEM_DEPENDENT_FLAG 3229 /* Obsolete */
#define PRO_E_ANNOT_ELEM 3230
#define PRO_E_ANNOTATION_REFERENCES 3231
#define PRO_E_ANNOT_ELEM_REF_INDEX 3232 /* Obsolete */
#define PRO_E_ANNOT_ELEM_PUBLISH_REF_FLAG 3233
#define PRO_E_ANNOT_ELEM_ARRAY 3234
#define PRO_E_CRV_WRAP_TRIM 3235
#define PRO_E_CRV_WRAP_STAY_ON_SURF 3236
#define PRO_E_STD_HOLE_DEPTH_REF 3237
#define PRO_E_TRIM_SILH_PLANE 3238
#define PRO_E_GROUP_COPY_REF_ITEMS 3239
#define PRO_E_GROUP_MIRROR_REF_PLANE 3240
#define PRO_E_GROUP_COPY_TECHNIQUE 3241
#define PRO_E_MOVE_FEATS_MOVE_VALUE 3242
#define PRO_E_MOVE_FEATS_MOVE_TYPE 3243
#define PRO_E_ANNOTATION_CONSUMED 3244
#define PRO_E_ANNOT_ELEM_APPL 3245
#define PRO_E_ANNOT_ELEM_APPL_TYPE 3246
#define PRO_E_ANNOT_ELEM_APPL_DATA 3247
#define PRO_E_ANNOT_ELEM_APPL_CONSUMED 3248
#define PRO_E_ANNOT_ELEM_APPL_REFERENCES 3249
#define PRO_E_ANNOT_ELEM_DESC_REF 3250
#define PRO_E_ANNOT_ELEM_ARRAY_NO_ACCESS 3251
#define PRO_E_DIRECTION_COMPOUND 3252
#define PRO_E_DIRECTION_REFERENCE 3253
#define PRO_E_DIRECTION_FLIP 3254
#define PRO_E_SMT_FLANGE_DEPTH 3255
#define PRO_E_SMT_FLANGE_SIDE_2_DEPTH 3256
#define PRO_E_SMT_FLANGE_SIDE_1_DEPTH 3257
#define PRO_E_SMT_FLANGE_DEPTH_TYPE 3258
#define PRO_E_SMT_FLANGE_DEPTH_OFFSET 3259
#define PRO_E_SMT_FLANGE_DEPTH_REF 3260
#define PRO_E_SMT_WALL_THICKNESS_FLIP 3261
#define PRO_E_SMT_WALL_SHARPS_TO_BENDS 3262
#define PRO_E_SMT_FLANGE_SEC_FLIP 3263
#define PRO_E_SMT_DEV_LEN_SOURCE 3264
#define PRO_E_SMT_DEV_LEN_Y_FACTOR_VALUE 3265
#define PRO_E_SMT_DEV_LEN_Y_FACTOR_TYPE 3266
#define PRO_E_SMT_DEV_LEN_Y_FACTOR 3267
#define PRO_E_SMT_DEV_LEN_BEND_TABLE 3268
#define PRO_E_SMT_DEV_LEN_CALCULATION 3269
#define PRO_E_SMT_FILLETS_SIDE 3270
#define PRO_E_SMT_FILLETS_VALUE 3271
#define PRO_E_SMT_FILLETS 3272
#define PRO_E_GENPAT_AXIS_REF 3273
#define PRO_E_GENPAT_DIR1_INC 3274
#define PRO_E_GENPAT_DIR2_INC 3275
#define PRO_E_GENPAT_AXIS1_INC 3276
#define PRO_E_GENPAT_AXIS2_INC 3277
#define PRO_E_SMT_FILLETS_USE_RAD 3278
#define PRO_E_REVOLVE_AXIS 3279
#define PRO_E_REVOLVE_AXIS_OPT 3280
#define PRO_E_DTMPLN_FIT_OUTLINE 3281
#define PRO_E_AREA_OFS_EXCL 3282
#define PRO_E_WIND_GEOMETRY_TYPE 3283
#define PRO_E_SMT_FLAT_WALL_ANGLE_TYPE 3284
#define PRO_E_SMT_FLAT_WALL_ANGLE_VAL 3285
#define PRO_E_SMT_FLAT_WALL_ANGLE_FLIP 3286
#define PRO_E_SMT_FLAT_WALL_ANGLE 3287
#define PRO_E_SMT_FLAT_WALL_ATT_EDGE 3288
#define PRO_E_SMT_FLANGE_TYPE 3289
#define PRO_E_DSHARE_COPY_ANNOT 3290
#define PRO_E_GENPAT_DIR1 3291
#define PRO_E_GENPAT_DIR2 3292
#define PRO_E_MERGED_REF_NCSEQ_ARR 3293
#define PRO_E_NCSEQ_PREREQUISITE_ARR 3294
#define PRO_E_PARENT_HOLESET_ID 3295
#define PRO_E_PARENT_FEAT_ID 3296
#define PRO_E_GENPAT_AXIS_ANG_WHOLE 3297
#define PRO_E_SMT_FLANGE_TRAJ_CRV_NORM 3298
#define PRO_E_MOVE_FEATS_TRF_ARR 3299
#define PRO_E_MOVE_FEATS_TRF 3300
#define PRO_E_MOVE_GEOM_TRF_ARR 3301
#define PRO_E_MOVE_GEOM_TRF 3302
#define PRO_E_SMT_WALL_TYPE 3303
#define PRO_E_ASSEM_SETUP_TYPE 3304
#define PRO_E_DRAFT_EXTEND 3305
#define PRO_E_DTMREF_INTENT_CHAIN 3306
#define PRO_E_DIR_PAT_DIR1_FLIP 3307
#define PRO_E_DIR_PAT_DIR2_FLIP 3308
#define PRO_E_AXIS_PAT_DIR1_FLIP 3309
#define PRO_E_SMT_WALL_HEIGHT 3310
#define PRO_E_SMT_WALL_HEIGHT_TYPE 3311
#define PRO_E_SMT_WALL_HEIGHT_VALUE 3312
#define PRO_E_SWPBLN_TANG_OPTION 3313
#define PRO_E_SWPBLN_TANG_COND 3314
#define PRO_E_SWPBLN_END_TNC 3315
#define PRO_E_SWPBLN_CONNECT_SURF_CHAIN 3316
#define PRO_E_AXIS_PAT_DIR2_FLIP 3318
#define PRO_E_GANG_DRILL_LEADER 3319
#define PRO_E_MFG_APPL_TYPE 3320
#define PRO_E_MILL_VOL_CUT_ORDER 3321
#define PRO_E_HOLESET_CUSTOM_PLATES 3322
#define PRO_E_HOLESET_CUSTOM_PLATE 3323
#define PRO_E_HOLESET_CUSTOM_REFERENCE 3324
#define PRO_E_HOLESET_CUSTOM_SURFACE 3325
#define PRO_E_HOLESET_CUSTOM_REF_ID 3326
#define PRO_E_HOLESET_CUSTOM_Z_OFFSET 3327
#define PRO_E_HOLESET_CUSTOM_VALUE 3328
#define PRO_E_SMT_CUT_NORMAL_DIR 3329
#define PRO_E_IS_SMT_CUT 3330
#define PRO_E_IS_UNATTACHED_WALL 3331
#define PRO_E_STD_SMT_THICKNESS 3332
#define PRO_E_STD_SMT_SWAP_DRV_SIDE 3333
#define PRO_E_COMPONENT_SETS 3340
#define PRO_E_COMPONENT_SET 3341
#define PRO_E_COMPONENT_SET_ID 3342
#define PRO_E_COMPONENT_SET_TYPE 3343
#define PRO_E_COMPONENT_SET_NAME 3344
#define PRO_E_COMPONENT_CONSTR_SET_ID 3345
#define PRO_E_COMP_INTERFACE_NAME 3350
#define PRO_E_COMP_INTERFACE_CONSTRAINTS 3360
#define PRO_E_COMP_INTERFACE_CONSTRAINT 3361
#define PRO_E_COMP_INTERFACE_CONSTR_TYPE 3362
#define PRO_E_COMP_INTERFACE_CONSTR_REF 3363
#define PRO_E_COMP_INTERFACE_CONSTR_REF_OFFSET 3364
#define PRO_E_COMP_INTERFACE_CONSTR_SET_ID 3365
#define PRO_E_COMP_INTERFACE_CONSTR_RULE 3366
#define PRO_E_COMP_INTERFACE_CONSTR_ATTR 3367
#define PRO_E_COMPONENT_INTERFACE_SETS 3370
#define PRO_E_COMPONENT_INTERFACE_SET 3371
#define PRO_E_COMPONENT_INTERFACE_SET_ID 3372
#define PRO_E_COMPONENT_INTERFACE_SET_TYPE 3373
#define PRO_E_COMPONENT_INTERFACE_SET_NAME 3374
#define PRO_E_COMP_INTERFACE_RULE 3380
#define PRO_E_MIRROR_PLANE 3381
#define PRO_E_MIRROR_CUT_CONDS 3382
#define PRO_E_STD_SEC_LOC_OPTION 3383
#define PRO_E_STD_SEC_LOC_PARAM 3384
#define PRO_E_SWPBLN_SEC_X_DIR 3385
#define PRO_E_GMRG_FEAT_TYPE 3386
#define PRO_E_GMRG_MATERIAL_OPT 3387
#define PRO_E_DSF_REF_MDL 3388
#define PRO_E_DSF_EXT_LOCAL_TYPE 3389
#define PRO_E_DSF_SEL_REF_MDL 3390
#define PRO_E_DSF_PLACEMENT 3391
#define PRO_E_DSF_DEPENDENCY 3392
#define PRO_E_DSF_ANNOT_CPY_ALL 3393
#define PRO_E_DSF_DTM_SELECTION 3394
#define PRO_E_DSF_ANNOT_DEPEND_ALL 3395
#define PRO_E_DSF_ANNOT_AUTO_CPY_DTM 3396
#define PRO_E_DSF_ANNOT_SEL_ANNOTS 3397
#define PRO_E_DSF_ANNOT_CPY_STATUS 3398
#define PRO_E_DSF_ANNOT_DEPENDENCY 3399
#define PRO_E_DSF_ANNOT_SELECTION 3400
#define PRO_E_DSF_ANNOT_SELECTIONS 3401
#define PRO_E_DSF_PROPAGATE_ANNOTS 3402
#define PRO_E_DSF_DTM_FIT 3403
#define PRO_E_DSF_DTMS_FIT 3404
#define PRO_E_CG_LOCATION 3405
#define PRO_E_CG_PLC_LOCAL_CSYS 3406
#define PRO_E_CG_PLC_EXT_CSYS 3407
#define PRO_E_CG_CSYS_PLACE 3408
#define PRO_E_CG_PLACEMENT 3409
#define PRO_E_CG_PUBD_GEOM 3410
#define PRO_E_CG_OBJS_COLL 3411
#define PRO_E_CG_REFS_COLL 3412
#define PRO_E_CG_PG_OR_REFS 3413
#define PRO_E_CG_SRFS_COPY 3414
#define PRO_E_CG_PLACE_TYPE 3415
#define PRO_E_GMRG_VARIED_ITEMS 3416
#define PRO_E_GMRG_COPY_DATUMS 3417
#define PRO_E_CG_REFS_TYPE 3418
#define PRO_E_COMPONENT_SET_FLIP 3419
#define PRO_E_COMPONENT_JAS_ZERO_TYPE 3420
#define PRO_E_COMPONENT_JAS_ORANGE_REF 3421
#define PRO_E_COMPONENT_JAS_GREEN_REF 3422
#define PRO_E_COMPONENT_JAS_REFS 3424
#define PRO_E_COMPONENT_JAS_REGEN_VALUE_FLAG 3425
#define PRO_E_COMPONENT_JAS_REGEN_VALUE 3426
#define PRO_E_COMPONENT_JAS_REGEN_VALUE_GROUP 3427
#define PRO_E_COMPONENT_JAS_MIN_LIMIT_FLAG 3428
#define PRO_E_COMPONENT_JAS_MIN_LIMIT_VAL 3429
#define PRO_E_COMPONENT_JAS_MIN_LIMIT 3430
#define PRO_E_COMPONENT_JAS_MAX_LIMIT_FLAG 3431
#define PRO_E_COMPONENT_JAS_MAX_LIMIT_VAL 3432
#define PRO_E_COMPONENT_JAS_MAX_LIMIT 3433
#define PRO_E_COMPONENT_JAS_RESTITUTION_FLAG 3434
#define PRO_E_COMPONENT_JAS_RESTITUTION_COEF 3435
#define PRO_E_COMPONENT_JAS_RESTITUTION 3436
#define PRO_E_COMPONENT_JAS_CONE_FLIP_FLAG 3437
#define PRO_E_COMPONENT_JAS_FRICTION_FLAG 3438
#define PRO_E_COMPONENT_JAS_STATIC_FRIC_COEF 3439
#define PRO_E_COMPONENT_JAS_KINEM_FRIC_COEF 3440
#define PRO_E_COMPONENT_JAS_RADIUS_VALUE 3441
#define PRO_E_COMPONENT_JAS_FRICTION 3442
#define PRO_E_COMPONENT_JAS_SET 3443
#define PRO_E_COMPONENT_JAS_SETS 3444
#define PRO_E_DSF_NOTIFY_UPDATE 3445
#define PRO_E_DSF_UPDATE_GEOMETRY 3446
#define PRO_E_SW_OPTIONS 3448
#define PRO_E_SW_QUALITY 3449
#define PRO_E_SW_FILL_HOLES 3450
#define PRO_E_SW_COLLECT_QUILTS 3451
#define PRO_E_SW_COLLECT_CONSTR_BODIES 3452
#define PRO_E_SW_SKIP_SURF_SIZE 3453
#define PRO_E_SW_COLLECT_ORDER 3454
#define PRO_E_SW_COMP_SUBSET 3455
#define PRO_E_SW_COMPONENT 3456
#define PRO_E_SW_INCLUDE_COMP 3457
#define PRO_E_SW_SEL_COMPONENT 3458
#define PRO_E_SW_REFS_COLL 3459
#define PRO_E_SHELL_LACE_BNDRY 3460
#define PRO_E_SMT_CORNERS_ARR 3461
#define PRO_E_SMT_CORNER 3462
#define PRO_E_SMT_CORNER_RELIEF 3463
#define PRO_E_SMT_CORNER_RELIEF_TYPE 3464
#define PRO_E_SMT_CORNER_RELIEF_WIDTH 3465
#define PRO_E_SMT_CORNER_RELIEF_WIDTH_TYPE 3466
#define PRO_E_SMT_CORNER_RELIEF_WIDTH_VAL 3467
#define PRO_E_SMT_CORNER_RELIEF_DEPTH 3468
#define PRO_E_SMT_CORNER_RELIEF_DEPTH_TYPE 3469
#define PRO_E_SMT_CORNER_RELIEF_DEPTH_VAL 3470
#define PRO_E_SMT_EDGE_RIP 3471
#define PRO_E_SMT_EDGE_RIP_TYPE 3472
#define PRO_E_SMT_EDGE_RIP_DIM_1 3473
#define PRO_E_SMT_EDGE_RIP_DIM_1_TYPE 3474
#define PRO_E_SMT_EDGE_RIP_DIM_1_VAL 3475
#define PRO_E_SMT_EDGE_RIP_DIM_2 3476
#define PRO_E_SMT_EDGE_RIP_DIM_2_TYPE 3477
#define PRO_E_SMT_EDGE_RIP_DIM_2_VAL 3478
#define PRO_E_SMT_EDGE_RIP_FLIP 3479
#define PRO_E_SMT_EDGE_RIP_ADD_GAP 3480
#define PRO_E_SMT_MTR_CUTS 3481
#define PRO_E_SMT_MTR_CUTS_WIDTH 3482
#define PRO_E_SMT_MTR_CUTS_WIDTH_TYPE 3483
#define PRO_E_SMT_MTR_CUTS_WIDTH_VAL 3484
#define PRO_E_SMT_MTR_CUTS_OFFSET 3485
#define PRO_E_SMT_MTR_CUTS_OFFSET_TYPE 3486
#define PRO_E_SMT_MTR_CUTS_OFFSET_VAL 3487
#define PRO_E_SMT_MTR_CUTS_ADD 3488
#define PRO_E_CG_FEAT_SUB_TYPE 3489
#define PRO_E_MFG_MOTIONS 3490
#define PRO_E_TOOL_MOTIONS 3491
#define PRO_E_TOOL_MOTION_GOTO_POINT 3492
#define PRO_E_TOOL_MOTION_GO_DELTA 3493
#define PRO_E_TOOL_MOTION_GO_RETRACT 3494
#define PRO_E_TOOL_MOTION_CL_COMMAND 3495
#define PRO_E_TOOL_MOTION_FOLLOW_CURVE 3496
#define PRO_E_TOOL_MOTION_GOTO_SURFACE 3497
#define PRO_E_TOOL_MOTION_GOTO_AXIS 3498
#define PRO_E_TOOL_MOTION_AUTOMATIC_CUT 3499
#define PRO_E_TOOL_MOTION_NORMAL_APPROACH 3500
#define PRO_E_TOOL_MOTION_TANGENT_APPROACH 3501
#define PRO_E_TOOL_MOTION_TANGENT_EXIT 3502
#define PRO_E_TOOL_MOTION_POINT 3503
#define PRO_E_TOOL_MOTION_OFFSET 3504
#define PRO_E_TOOL_MOTION_AXIS 3505
#define PRO_E_TOOL_MOTION_CL_COMMAND_STR 3506
#define PRO_E_TOOL_MOTION_CURVE 3507
#define PRO_E_TOOL_MOTION_SURFACE 3508
#define PRO_E_TOOL_MOTION_SUB_FEAT_ID 3509
#define PRO_E_TOOL_MOTION_AXIS_MOVES 3510
#define PRO_E_TOOL_MOTION_CURVE_DIR 3511
#define PRO_E_TOOL_MOTION_NORMAL_EXIT 3512
#define PRO_E_TOOL_MOTION_SPINDLE_SENSE 3513
#define PRO_E_TOOL_MOTION_SPINDLE_MAX_RPM 3514
#define PRO_E_TOOL_MOTION_TBL_REC 3515
#define PRO_E_TOOL_MOTION_RAMP_APPROACH 3516
#define PRO_E_TOOL_MOTION_RAMP_EXIT 3517
#define PRO_E_TOOL_MOTION_CONNECT 3518
#define PRO_E_SMT_AUTO_EXLD_EDGE 3519
/* MILL WINDOW */
#define PRO_E_MILLWIN_WINDOW_TYPE 3520
#define PRO_E_MILLWIN_REF_PLANE 3521
#define PRO_E_MILLWIN_REF_PART 3522
#define PRO_E_MILLWIN_DEFAULT_DEPTH 3523
#define PRO_E_MILLWIN_DEPTH_COMPOUND 3524
#define PRO_E_MILLWIN_DEPTH_CSYS 3525
#define PRO_E_MILLWIN_DEPTH_TYPE 3526
#define PRO_E_MILLWIN_DEPTH_VALUE 3527
#define PRO_E_MILLWIN_DEPTH_REFERENCE 3528
#define PRO_E_MILLWIN_OPTIONS_COMPOUND 3529
#define PRO_E_MILLWIN_TOOL_SIDE 3530
#define PRO_E_MILLWIN_KEEP_INSIDE_LOOPS 3531
#define PRO_E_MILLWIN_ADJUST_GEOMETRY 3532
#define PRO_E_MILLWIN_DEFAULT_OFFSET 3533
#define PRO_E_MILLWIN_OFFSET_COMPOUND 3534
#define PRO_E_MILLWIN_OFFSET_VALUE 3535
#define PRO_E_MILLWIN_OFFSET_DIRECTION 3536
#define PRO_E_COMPONENT_SLOT_EXTRA_CRV_REFS 3537
#define PRO_E_COMPONENT_SLOT_EXTRA_CRV_REF 3538
#define PRO_E_COMPONENT_JAS_MIN_LIMIT_REF 3539
#define PRO_E_COMPONENT_JAS_MAX_LIMIT_REF 3540
#define PRO_E_ANNOT_DRIVING_SINGLE_REF 3560
#define PRO_E_ANNOT_DRIVING_REF 3561
#define PRO_E_ANNOT_DRIVING_REF_ARRAY 3562
#define PRO_E_ANNOT_PROP_STATE 3563
#define PRO_E_ANNOT_FEAT_REFERENCE_TYPE 3564
#define PRO_E_ANNOT_FEAT_REF_INDEX 3565
#define PRO_E_FEAT_PROP_COPY_ALL 3566
#define PRO_E_FEAT_PROP_DEP_ALL 3567
#define PRO_E_FEAT_PROP_STATUS 3568
#define PRO_E_ANNOT_ELEM_DIM_ORIGIN 3569
/* 3582-3584 are taken, see below */
#define PRO_E_COMP_PLACE_INTERFACE 3600
#define PRO_E_COMP_PLACE_INTERFACE_TYPE 3601
#define PRO_E_COMP_PLACE_INTERFACE_COMP 3602
#define PRO_E_COMP_PLACE_INTERFACE_ASSEMS 3603
#define PRO_E_COMP_PLACE_INTERFACE_ASSEM 3604
#define PRO_E_COMP_PLACE_INTERFACE_ASSEM_REF 3605
#define PRO_E_COMPONENT_SET_MISC_ATTR 3606
#define PRO_E_SWPBLN_AREA_CNTRL 3607
#define PRO_E_SWPBLN_AREA_ELEM 3608
#define PRO_E_SWPBLN_AREA_LOC 3609
#define PRO_E_SWPBLN_AREA_VAL 3610
#define PRO_E_TURNPROF_TYPE 3611
#define PRO_E_TURNPROF_REF_CSYS 3612
#define PRO_E_TURNPROF_REF_FEAT 3613
#define PRO_E_TURNPROF_REF_PART 3614
#define PRO_E_TURNPROF_FROM_VERTEX 3615
#define PRO_E_TURNPROF_TO_VERTEX 3616
#define PRO_E_TURNPROF_LOOP_SIDE 3617
#define PRO_E_TURNPROF_TOOL_SIDE 3618
#define PRO_E_TURNPROF_MATERIAL_SIDE 3619
#define PRO_E_TURNPROF_SURFACES 3620
#define PRO_E_TURNPROF_FROM_SURFACE 3621
#define PRO_E_TURNPROF_TO_SURFACE 3622
#define PRO_E_SWPBLN_SECTIONS_METHOD 3623
#define PRO_E_COMPONENT_LOCATIONS 3624
#define PRO_E_COMPONENT_LOCATION 3625
/* ECAD Area */
#define PRO_E_ECAD_AREA_TYPE 3626
#define PRO_E_ECAD_AREA_3D_VOLUME 3627
#define PRO_E_ECAD_AREA_DEPTH_TYPE 3628
#define PRO_E_ECAD_AREA_DEPTH 3629
#define PRO_E_ECAD_AREA_DEPTH2 3630
#define PRO_E_ECAD_AREA_XHATCH 3631
#define PRO_E_GENPAT_CURVE 3632
#define PRO_E_GENPAT_CRV_PNT_REF 3633
#define PRO_E_GENPAT_CRV_SPACING 3634
#define PRO_E_GENPAT_CRV_NUMBER 3635
#define PRO_E_GENPAT_CRV_FLIP 3636
#define PRO_E_GENPAT_CRV_OR_TYPE 3637
#define PRO_E_GENPAT_CRV_PLC_TYPE 3638
#define PRO_E_TURNPROF_ENV_TYPE 3639
#define PRO_E_TURNPROF_ADJ_ARRAY 3640
#define PRO_E_TURNPROF_ADJ_SEGMENT 3641
#define PRO_E_COMP_INTERFACE_RECEIVE_TYPE 3642
#define PRO_E_COMP_INTERFACE_TYPE 3643
#define PRO_E_COMP_INTERFACE_DEFAULT 3644
#define PRO_E_COMP_INTERFACE_DESCRIPTION 3645
#define PRO_E_LIN_HOLE_DIR_REF 3646
#define PRO_E_RETRACT_SURFACE 3647
#define PRO_E_RETRACT_SURFACE_TYPE 3648
#define PRO_E_RETRACT_SURFACE_REF 3649
#define PRO_E_RETRACT_SURFACE_ORIENT 3650
#define PRO_E_RETRACT_SURFACE_VALUE 3651
#define PRO_E_SRF_OFFS_MFG_TOOL_RAD 3652
#define PRO_E_AUTODRILL_CSINK_DIAM 3653
#define PRO_E_AUTODRILL_CBORE_DIAM 3654
#define PRO_E_AUTODRILL_THREAD_DIAM 3655
#define PRO_E_AUTODRILL_DEPTH 3656
#define PRO_E_AUTODRILL_CBORE_HEIGHT 3657
#define PRO_E_AUTODRILL_THREAD_LENGTH 3658
#define PRO_E_AUTODRILL_CSINK_ANGLE 3659
#define PRO_E_AUTODRILL_POINT_ANGLE 3660
#define PRO_E_AUTODRILL_UPPER_TOL 3661
#define PRO_E_AUTODRILL_LOWER_TOL 3662
#define PRO_E_AUTODRILL_STRATEGY_NAME 3663
#define PRO_E_AUTODRILL_STRATEGY_PATH 3664
#define PRO_E_AUTODRILL_PITCH 3665
#define PRO_E_AUTODRILL_ID 3666
#define PRO_E_AUTODRILL_SEQ_IDX 3667
#define PRO_E_AUTODRILL_DEPTH_BY_TABLE 3668
#define PRO_E_AUTODRILL_LOCAL_PATH 3669
#define PRO_E_AUTODRILL_TPI 3670
#define PRO_E_AUTODRILL_DIAM 3671
#define PRO_E_MFG_RETRACT 3672
#define PRO_E_BELONGS_TO_MFG_VOL 3673
#define PRO_E_MILLWIN_SILH_CONTOUR 3674
#define PRO_E_SPRING_DAMPER_TYPE 3675
#define PRO_E_SPRING_DAMPER_REF 3676
#define PRO_E_DMP_CVAL 3677
#define PRO_E_AUTOMATIC_CUT_OPTION 3678
#define PRO_E_TOOL_MOTION_CURVE_TRAJECTORY 3679
#define PRO_E_TOOL_MOTION_SURF_TRAJECTORY 3680
#define PRO_E_TOOL_MOTION_EDGE_TRAJECTORY 3681
#define PRO_E_TRAJECTORY_FIT_EDGE 3682
#define PRO_E_THREADMILL_DEPTH 3683
#define PRO_E_THREADMILL_END_PLANE 3684
#define PRO_E_OUTSIDE_THREAD_MILL 3685
#define PRO_E_SHELL_ALT_CUT_METHOD 3686
#define PRO_E_IS_ECAD_AREA 3687
#define PRO_E_RNDALL_SCOPE 3688
#define PRO_E_RNDALL_CONVEXITY 3689
#define PRO_E_RNDALL_GEOM_SCOPE 3690
#define PRO_E_RNDALL_QUILT 3691
#define PRO_E_RNDALL_RADII 3692
#define PRO_E_RNDALL_CONVEX_RAD 3693
#define PRO_E_RNDALL_CONCAVE_RAD 3694
#define PRO_E_RNDALL_CR_METHOD 3695
#define PRO_E_DTMREF_DATUM_COLLECTION_APPL 3696
#define PRO_E_THREAD_DEPTH 3697
#define PRO_E_TOOL_MOTION_LEAD_IN 3698
#define PRO_E_TOOL_MOTION_LEAD_OUT 3699
#define PRO_E_TOOL_MOTION_HELICAL_APPROACH 3700
#define PRO_E_TOOL_MOTION_HELICAL_EXIT 3701
#define PRO_E_TOOL_MOTION_PLUNGE 3702
#define PRO_E_TOOL_MOTION_GOHOME 3703
#define PRO_E_TOOL_MOTION_TLAXIS_APPROACH 3704
#define PRO_E_TOOL_MOTION_TLAXIS_EXIT 3705
#define PRO_E_TOOL_MOTION_DRL_CONNECT 3706
#define PRO_E_TOOL_MOTION_FOLLOW_CUT 3707
#define PRO_E_SPRING_U 3708
#define PRO_E_TURNPROF_ADJ_TYPE 3709
#define PRO_E_TURNPROF_ADJ_FROM 3710
#define PRO_E_TURNPROF_ADJ_TO 3711
#define PRO_E_TURNPROF_DIRECTION 3712
#define PRO_E_DSGNTAREA_SET_APPENDIX 3713
#define PRO_E_DSGNTAREA_CREATION 3714
#define PRO_E_DSGNTAREA_CREATION_TYPE 3715
#define PRO_E_DSGNTAREA_LIE_ON 3716
#define PRO_E_DSGNTAREA_CREATION_FLIP 3717
#define PRO_E_DSGNTAREA_SETS 3718
#define PRO_E_DSGNTAREA_SET 3719
#define PRO_E_DSGNTAREA_SET_REFS 3720
#define PRO_E_SRF_MRG_QUILT_REF 3721
#define PRO_E_SRF_MRG_QUILT_CMPD 3722
#define PRO_E_SRF_MRG_QUILT_ARR 3723
#define PRO_E_RM_SURF_REF_TYPE 3724
#define PRO_E_RM_SURF_ATTACH_TYPE 3725
#define PRO_E_RM_SURF_SRF_REFS 3726
#define PRO_E_RM_SURF_CRV_REFS 3727
#define PRO_E_SW_EXCLUDE_SURF_COLL_APPL 3728
#define PRO_E_SRF_MRG_QUILT_SIDE 3729
#define PRO_E_SPRING_DIAMETER 3730
#define PRO_E_SPRING_USE_DIAMETER 3731
#define PRO_E_DTMREF_INTENT_CHAIN_FLIP 3732
#define PRO_E_RNDCH_AUTO_CONTINUE 3733
#define PRO_E_PROJ_CRV_ONESRF_REF 3734
#define PRO_E_STD_EXCL_CNTRS 3735
#define PRO_E_TURNPROF_ADJ_FLIP 3736
#define PRO_E_TURNPROF_ADJ_RAD 3737
#define PRO_E_TURNPROF_ADJ_DIST 3738
#define PRO_E_TURNPROF_REF_SURF 3739
#define PRO_E_DTMREF_APPENDIX 3740
#define PRO_E_HLE_DEPTH_DIM_TYPE 3741
#define PRO_E_MOVE_NO_COPY 3742
#define PRO_E_INTERCH_TAG_REFS 3743
#define PRO_E_TOOL_MOTION_AUTO_PLUNGE 3744
#define PRO_E_INTENT_NAME_CHECK 3745
#define PRO_E_INTENT_NAME 3746
#define PRO_E_INTENT_INSTANCE 3747
#define PRO_E_DTMAXIS_DIM_CONSTR_TYPE 3748
#define PRO_E_DTMAXIS_DIM_ORIENT_REF 3749
#define PRO_E_HLE_ADD_NOTE 3750
#define PRO_E_HOLE_NOTE 3751
#define PRO_E_CMM_SEGMENTS 3752
#define PRO_E_TOOL_MOTION_LINKS 3753
#define PRO_E_STD_EXCL_CNTR_SRF_REF 3754
#define PRO_E_STD_EXCL_CNTR_EDGE_REF 3755
#define PRO_E_STD_EXCL_CNTRS_ONE_CNTR 3756
#define PRO_E_DTMREF_SINGLE_OBJ 3757
#define PRO_E_DTMREF_INTENT_COLL 3758
#define PRO_E_IDD_RMVSRF_GAPS_SLIVERS_REFS 3759
#define PRO_E_IDD_RMVSRF_GAPS_SLIVERS 3760
#define PRO_E_RETRACT_SURFACE_TRAVERSE 3761
#define PRO_E_LWPLN_ASSOC 3762
#define PRO_E_LWPLN_GRID 3763
#define PRO_E_LWPLN_TRANSFORM 3764
#define PRO_E_LWPLN_GUIDES 3765
#define PRO_E_LWPLN_GUIDE_COM 3766
#define PRO_E_LWPLN_GUIDE 3767
#define PRO_E_TOOL_MOTION_CL_COMMAND_LOC_TYPE 3768
#define PRO_E_TOOL_MOTION_CL_COMMAND_PARAM 3769
#define PRO_E_TOOL_MOTION_REF_ID 3770
#define PRO_E_TOOL_MOTION_ID 3771
#define PRO_E_TOOL_MOTION_UI_ID 3772
#define PRO_E_TOOL_MOTION_REF_INDEX 3773
#define PRO_E_SMT_MTR_CUTS_KEEP_DEF_AREAS 3774
#define PRO_E_COMPONENT_JAS_0_OFFSET_VAL 3775
#define PRO_E_SPRING_K 3776
#define PRO_E_CHECK_SURF_COLL 3777
#define PRO_E_ADD_REF_PARTS 3778
#define PRO_E_USE_MILL_STK 3779
#define PRO_E_SW_FILL_CNTRS_ARR 3780
#define PRO_E_SW_FILL_CNTRS 3781
#define PRO_E_SW_FILL_CNTRS_SRF_SEL 3782
#define PRO_E_RNDALL_GROUP_OPTIONS 3783
#define PRO_E_RNDALL_DIMS_DEPENDENT 3784
#define PRO_E_RNDALL_KEEP_RELATIONS 3785
/*
#define PRO_E_WELD_STANDARD see below
*/
#define PRO_E_WELD_MATERIAL 3786
#define PRO_E_WELD_PROCESS 3787
#define PRO_E_WELD_PARAMS 3788
/*
#define PRO_E_WELD_SYMMETRICAL see below
*/
#define PRO_E_WELD_GEOM_TYPE 3789
#define PRO_E_WELD_LW_TRAJ_CRV_COLL 3790
#define PRO_E_WELD_IS_CONTACT_SURF 3791
#define PRO_E_WELD_SURF_SURF 3792
#define PRO_E_WELD_XSEC_AREA 3793
#define PRO_E_WELD_XSEC_AREA_OPT 3794
#define PRO_E_WELD_XSEC_AREA_VAL 3795
#define PRO_E_WELD_XSEC_AREA_REF 3796
#define PRO_E_WELD_X_SEC_SHAPE 3797
#define PRO_E_WELD_ANSI 3798
#define PRO_E_WELD_L_X_L 3799
#define PRO_E_WELD_L_X_L_LEG_OPT 3800
#define PRO_E_WELD_L_X_L_LEG_VAL 3801
#define PRO_E_WELD_L_X_L_LEG_REF 3802
#define PRO_E_WELD_L1_X_L2 3803
#define PRO_E_WELD_L1_LEG_OPT 3804
#define PRO_E_WELD_L1_LEG_VAL 3805
#define PRO_E_WELD_L1_LEG_REF 3806
#define PRO_E_WELD_L2_LEG_OPT 3807
#define PRO_E_WELD_L2_LEG_VAL 3808
#define PRO_E_WELD_L2_LEG_REF 3809
#define PRO_E_WELD_ISO 3810
#define PRO_E_WELD_A 3811
#define PRO_E_WELD_A_LEG_OPT 3812
#define PRO_E_WELD_A_LEG_VAL 3813
#define PRO_E_WELD_A_LEG_REF 3814
#define PRO_E_WELD_Z 3815
#define PRO_E_WELD_Z_LEG_OPT 3816
#define PRO_E_WELD_Z_LEG_VAL 3817
#define PRO_E_WELD_Z_LEG_REF 3818
/*
#define PRO_E_WELD_Z1_X_Z2 see below
#define PRO_E_WELD_Z1_LEG_OPT see below
#define PRO_E_WELD_Z1_LEG_VAL see below
#define PRO_E_WELD_Z1_LEG_REF see below
#define PRO_E_WELD_Z2_LEG_OPT see below
#define PRO_E_WELD_Z2_LEG_VAL see below
#define PRO_E_WELD_Z2_LEG_REF see below
*/
#define PRO_E_WELD_SURF_CRV 3820
#define PRO_E_WELD_ANGLE 3821
#define PRO_E_WELD_CRV_CRV 3822
#define PRO_E_WELD_TRAJ_DIR 3823
#define PRO_E_WELD_REF_SET_ARR 3824
#define PRO_E_WELD_REF_SET 3825
/*
#define PRO_E_WELD_COLLECTIONS see below
*/
#define PRO_E_WELD_SIDE1_CRV_COLL 3826
#define PRO_E_WELD_SIDE1_SURF_COLL 3827
#define PRO_E_WELD_SIDE2_CRV_COLL 3828
#define PRO_E_WELD_SIDE2_SURF_COLL 3829
#define PRO_E_WELD_JOINT_ARR 3830
#define PRO_E_WELD_JOINT_SEG 3831
/*
#define PRO_E_WELD_JOINT_IDX 3832
#define PRO_E_WELD_JOINT_SWAP_ENDS 3833
*/
/*
#define PRO_E_WELD_JOINT_IS_INCLUDED see below
#define PRO_E_WELD_JOINT_IS_SYM_ATTACH see below
*/
#define PRO_E_WELD_JOINT_START_OPT 3834
#define PRO_E_WELD_JOINT_START_VAL 3835
#define PRO_E_WELD_JOINT_START_REF 3836
#define PRO_E_WELD_JOINT_END_OPT 3837
#define PRO_E_WELD_JOINT_END_VAL 3838
#define PRO_E_WELD_JOINT_END_REF 3839
/*
#define PRO_E_WELD_JOINT_STATUS see below
*/
#define PRO_E_WELD_INTERMITTENT 3840
/*
#define PRO_E_WELD_IS_INTER see below
#define PRO_E_WELD_INTER_WELD_SPACING see below
*/
#define PRO_E_WELD_INTER_OPTS 3841
/*
#define PRO_E_WELD_INTER_LIN_ANG_OPT see below
*/
#define PRO_E_WELD_INTER_TYPE 3842
#define PRO_E_WELD_INTER_SEG_LEN_LIN 3843
#define PRO_E_WELD_INTER_SEG_NUM 3845
#define PRO_E_WELD_INTER_SEG_PITCH_LIN 3846
/*
#define PRO_E_WELD_INTER_STAGGERED see below
*/
#define PRO_E_WELD_MATERIAL_SIDE 3848
#define PRO_E_WELD_CONTOUR 3849
#define PRO_E_WELD_FIELD_WELD 3850
#define PRO_E_WELD_FINISH 3851
/*
#define PRO_E_WELD_IDENT_LINE see below
#define PRO_E_WELD_IDENT_LINE_POS see below
#define PRO_E_WELD_OTHER_SIDE_SYMB see below
#define PRO_E_WELD_NEXT_LEADER_OPT see below
#define PRO_E_WELD_NEXT_LEADER_REF see below
#define PRO_E_WELD_GR_BACK see below
#define PRO_E_WELD_GR_BACK_TYPE see below
#define PRO_E_WELD_GR_BACKING see below
#define PRO_E_WELD_GR_BACK_CONTOUR see below
#define PRO_E_WELD_GR_BACK_FINISH see below
#define PRO_E_WELD_GR_BACK_SIZE see below
#define PRO_E_WELD_GR_BACK_SIZE_OPT see below
#define PRO_E_WELD_GR_BACK_SIZE_VAL see below
*/
#define PRO_E_WELD_FRST_LEG_SIMP_SEL 3852
#define PRO_E_WELD_SEC_LEG_SIMP_SEL 3853
#define PRO_E_WELD_INTER_SEG_PITCH_ANG 3854
#define PRO_E_WELD_INTER_SEG_LEN_ANG 3855
#define PRO_E_WELD_TRAJ_FLIP_ENDS 3856
#define PRO_E_WELD_COMBINE_TYPE 3858
#define PRO_E_WELD_COMBINE_FIRST_COLL 3859
#define PRO_E_WELD_COMBINE_SECOND_COLL 3860
/*
#define PRO_E_WELD_FIX_INDEX see below
#define PRO_E_WELD_PLUGSLOT_SLOT_LENGTH see below
#define PRO_E_WELD_MEASURES see below
#define PRO_E_WELD_INTER_NUM_N_PITCH see below
*/
#define PRO_E_SW_COLLECTION_TYPE 3861
#define PRO_E_SURFREG_SPLITTING_OPTION 3862
#define PRO_E_BELT_PLANE 3863
#define PRO_E_BELT_PULLEYS 3864
#define PRO_E_BELT_PULLEY_RECORD 3865
#define PRO_E_BELT_PULLEY_SEL 3866
#define PRO_E_BELT_PULLEY_WRAP_SIDE 3867
#define PRO_E_BELT_PULLEY_DIAMETER 3868
#define PRO_E_BELT_PULLEY_CONN_NUM 3869
#define PRO_E_BELT_PULLEY_FLIP_CONN_BODIES 3870
#define PRO_E_BELT_PULLEY_NUM_WRAPS 3871
#define PRO_E_BELT_DEFINE_CUSTOM_U_LENGTH 3872
#define PRO_E_BELT_UNSTRETCHED_LENGTH 3873
#define PRO_E_BELT_THICKNESS_COEFF 3874
#define PRO_E_BELT_STIFFNESS_COEFF 3875
#define PRO_E_NCSEQ_HAS_TOOL_MTNS 3877
#define PRO_E_NCSEQ_CLASSIC_STYLE 3878
#define PRO_E_TOOL_MOTION_AREA_TURNING 3880
#define PRO_E_TOOL_MOTION_GROOVE_TURNING 3881
#define PRO_E_TOOL_MOTION_PROF_TURNING 3882
#define PRO_E_TOOL_MOTION_TURN_PROFILE 3883
#define PRO_E_TOOL_MOTION_TURN_STOCK_BOUND 3884
#define PRO_E_TOOL_MOTION_TURN_START_EXT 3885
#define PRO_E_TOOL_MOTION_TURN_END_EXT 3886
#define PRO_E_HLE_MAKE_LIGHTWT 3887
#define PRO_E_SMT_WALL_DIM_SCHEME 3888
#define PRO_E_FORM_PUNCH_SIDE 3889
#define PRO_E_FORM_TOOL_CSYS 3890
#define PRO_E_FORM_TOOL_NAME 3891
#define PRO_E_C3D_REF1 3892
#define PRO_E_C3D_MAT_OPTION1 3893
#define PRO_E_C3D_MAT_NAME1 3894
#define PRO_E_C3D_POISSON1 3895
#define PRO_E_C3D_YOUNG1 3896
#define PRO_E_C3D_DAMPING1 3897
#define PRO_E_C3D_REF2 3898
#define PRO_E_C3D_MAT_OPTION2 3899
#define PRO_E_C3D_MAT_NAME2 3900
#define PRO_E_C3D_POISSON2 3901
#define PRO_E_C3D_YOUNG2 3902
#define PRO_E_C3D_DAMPING2 3903
#define PRO_E_C3D_FRICTION 3904
#define PRO_E_C3D_STATIC_FRIC_COEF 3905
#define PRO_E_C3D_KINEM_FRIC_COEF 3906
#define PRO_E_TBEND_RADIUS 3907
#define PRO_E_TBEND_CRV_OPTION 3908
#define PRO_E_TBEND_TYPE_OPTION 3909
#define PRO_E_TBEND_SOLID_OPTION 3910
#define PRO_E_TBEND_QUILT_REF 3911
#define PRO_E_TBEND_CRV_REF 3912
#define PRO_E_TBEND_AXIS_REF 3913
#define PRO_E_TBEND_PROFILE_SEC 3914
#define PRO_E_TBEND_NORM_SEC 3915
#define PRO_E_TBEND_SRF1 3916
#define PRO_E_TBEND_SRF2 3917
#define PRO_E_TBEND_SKET_OPTION 3918
#define PRO_E_TOOL_RS_GEN_TYPE 3919
#define PRO_E_TOOL_RS_GEN_SEL_MDL 3920
#define PRO_E_TOOL_RS_GEN_SEL_SEGMENT 3921
/* Cabling Location */
#define PRO_E_CBL_LOCS 3922
#define PRO_E_CBL_LOC 3923
#define PRO_E_CBL_LOC_TYPE 3924
#define PRO_E_CBL_LOC_PACK_TYPE 3925
#define PRO_E_CBL_LOC_CONSTR_TYPE 3926
#define PRO_E_CBL_LOC_CONSTR_REF 3927
#define PRO_E_CBL_LOC_DIM_CONSTRS 3928
#define PRO_E_CBL_LOC_DIM_CONSTR 3929
#define PRO_E_CBL_LOC_DIM_CONSTR_REF 3930
#define PRO_E_CBL_LOC_DIM_CONSTR_VAL 3931
/* end of cabling location */
#define PRO_E_CSYS_FOLLOW_SRF_OPT 3932
#define PRO_E_HOLESET_START 3933
#define PRO_E_HOLESET_START_TYPE 3934
#define PRO_E_HOLESET_START_SURFACE 3935
#define PRO_E_HOLESET_END 3936
#define PRO_E_HOLESET_END_TYPE 3937
#define PRO_E_HOLESET_END_SURFACE 3938
#define PRO_E_HOLESET_DEPTH_VALUE 3939
#define PRO_E_HOLESET_CSINK_DIAM 3940
#define PRO_E_HOLESET_USE_BRKOUT_DIST 3941
#define PRO_E_HOLESET_SEL_PNTS_ON_SURFACES 3942
#define PRO_E_HOLESET_SEL_INDIV_PNTS 3943
#define PRO_E_HOLESET_SEL_PNTS_BY_FEATURE 3944
#define PRO_E_HOLESET_SEL_PROJECT_SURFACES 3945
#define PRO_E_HOLESET_SEL_UNSEL_PNTS 3946
#define PRO_E_HOLESET_SEL_MAX_PROJECT_DIST 3947
#define PRO_E_HOLESET_END_MEASURE_BY 3948
#define PRO_E_AUTODRILL_INFO 3949
#define PRO_E_FORM_PUNCH_QUILT 3950
#define PRO_E_FORM_PUNCH_MATERIAL_SIDE 3951
#define PRO_E_FORM_PUNCH_HIDE_QUILT 3952
#define PRO_E_CSYS_ONSURF_TYPE 3953
#define PRO_E_CSYS_DIM_CONSTRS 3954
#define PRO_E_CSYS_DIM_CONSTR 3955
#define PRO_E_CSYS_DIM_CONSTR_REF 3956
#define PRO_E_CSYS_DIM_CONSTR_VAL 3957
#define PRO_E_SW_RES_GEOM_OPT 3958
/*
#define PRO_E_SW_FAILED_SLD_OPT see below
*/
#define PRO_E_SPRING_ATTACH_POINTS 3959
#define PRO_E_SPRING_ATTACH_REF 3960
#define PRO_E_MACHINE_ASSEM 3961
#define PRO_E_MACHINE_CAPABILITY 3962
#define PRO_E_WELD_SYMMETRICAL 3963
#define PRO_E_WELD_JOINT_IS_SYM_ATTACH 3964
#define PRO_E_GENPAT_PROJECT 3965
#define PRO_E_GENPAT_PROJ_OPT 3966
#define PRO_E_GENPAT_PROJ_SRF_REF 3582
#define PRO_E_GENPAT_PROJ_OR_TYPE 3583
#define PRO_E_GENPAT_WRAP_OPT 3584
#define PRO_E_GENPAT_ALT_ORIG 3967
#define PRO_E_GENPAT_ALT_ORG_OPT 3968
#define PRO_E_GENPAT_ORG_REF 3969
#define PRO_E_GENPAT_POINT 3970
#define PRO_E_GENPAT_POINT_REF_TYPE 3971
#define PRO_E_GENPAT_POINT_REF 3972
#define PRO_E_GENPAT_OFFSET_FROM_SKET 3973
#define PRO_E_UDF_OPTION 3980
#define PRO_E_UDF_FAMTBL_INST_NAME 3981
#define PRO_E_UDF_SCALE 3982
#define PRO_E_UDF_SCALE_TYPE 3983
#define PRO_E_UDF_SCALE_VALUE 3984
#define PRO_E_UDF_DIM_DISPLAY 3985
#define PRO_E_UDF_DEPENDENCY 3986
#define PRO_E_UDF_REDEF_FEATS 3987
#define PRO_E_UDF_REDEF_FEAT 3988
#define PRO_E_UDF_PREVIEW_STOP_FEAT 3989
#define PRO_E_UDF_PLACEMENT 3990
#define PRO_E_UDF_REFS 3991
#define PRO_E_UDF_REF 3992
#define PRO_E_UDF_CSYS 3993
#define PRO_E_UDF_VARIABLE 3994
#define PRO_E_UDF_VAR_DIMS 3995
#define PRO_E_UDF_VAR_DIM_VALUE 3996
#define PRO_E_UDF_VAR_PARAMS 3997
#define PRO_E_UDF_VAR_PARAM_VALUE 3998
#define PRO_E_UDF_VAR_AE_ITEMS 3999
#define PRO_E_UDF_VAR_AE_ITEM_VALUE 4000
#define PRO_E_UDF_RELATION 4001
#define PRO_E_UDF_EXT_DIMS 4002
#define PRO_E_UDF_EXT_DIM 4003
#define PRO_E_UDF_EXT_PARAMS 4004
#define PRO_E_UDF_EXT_PARAM 4005
#define PRO_E_UDF_EXT_PARAM_SEL_OPT 4006
#define PRO_E_UDF_EXT_PARAM_SEL_IDX 4007
#define PRO_E_UDF_EXT_PARAM_NAME 4008
#define PRO_E_UDF_EXT_PARAM_VALUE 4009
#define PRO_E_UDF_ADJUSTMENT 4010
#define PRO_E_UDF_ADJ_ITEMS 4011
#define PRO_E_UDF_ADJ_ITEM_VALUE 4012
#define PRO_E_UDF_APPLICATION 4013
#define PRO_E_UDF_ASSOC_MDLS 4014
#define PRO_E_UDF_ASSOC_MDL_NAME 4015
#define PRO_E_UDF_KKB_NAME 4016
#define PRO_E_PIPE_FOLLOW_MAIN_REF_TYPE 4017
#define PRO_E_PIPE_FOLLOW_MAIN_REF 4018
#define PRO_E_PIPE_FOLLOW_MAIN_REF_AXIS 4019
#define PRO_E_PIPE_ROUTE_ENDS 4020
#define PRO_E_PIPE_ROUTE_END_FIRST 4021
#define PRO_E_PIPE_ROUTE_END_SECOND 4022
#define PRO_E_PIPE_ROUTE_END_OPT 4023
#define PRO_E_PIPE_ROUTE_END_LENGTH 4024
#define PRO_E_PIPE_ROUTE_END_REF 4025
#define PRO_E_DIR_PAT_DIR1_OPT 4026
#define PRO_E_DIR_PAT_DIR2_OPT 4027
#define PRO_E_DIR1_X_OFFSET 4028
#define PRO_E_DIR1_Y_OFFSET 4029
#define PRO_E_DIR1_Z_OFFSET 4030
#define PRO_E_DIR2_X_OFFSET 4031
#define PRO_E_DIR2_Y_OFFSET 4032
#define PRO_E_DIR2_Z_OFFSET 4033
#define PRO_E_DIR_PAT_CSYS1_REF 4034
#define PRO_E_DIR_PAT_CSYS2_REF 4035
#define PRO_E_TOOL_MOTION_TURN_START_VALUE 4036
#define PRO_E_TOOL_MOTION_TURN_START_REF 4037
#define PRO_E_TOOL_MOTION_TURN_START_ORIENT 4038
#define PRO_E_TOOL_MOTION_TURN_END_VALUE 4039
#define PRO_E_TOOL_MOTION_TURN_END_REF 4040
#define PRO_E_TOOL_MOTION_TURN_END_ORIENT 4041
#define PRO_E_TOOL_MOTION_FULL_DEPTH_CUT 4042
#define PRO_E_TOOL_MOTION_FROM_TO_DEPTH_CUT 4043
#define PRO_E_TOOL_MOTION_TO_DEPTH_CUT 4044
#define PRO_E_TOOL_MOTION_ONE_SLICE_CUT 4045
#define PRO_E_WELD_JOINT_IS_INCLUDED 4046
#define PRO_E_WELD_GR_BACK_TYPE 4047
#define PRO_E_WELD_INTER_STAGGERED 4048
#define PRO_E_WELD_SPOT_DEFINITION 4050
#define PRO_E_WELD_SPOT_PLACEMENT_TYPE 4051
#define PRO_E_WELD_SPOT_POINTS 4052
#define PRO_E_WELD_SPOT_DIR_OPTS 4053
#define PRO_E_WELD_SPOT_NUM_WELDS 4056
#define PRO_E_WELD_SPOT_SPACING 4057
#define PRO_E_WELD_SPOT_DIAMETER 4058
#define PRO_E_WELD_COMMON_OPTS 4059
#define PRO_E_WELD_SPOT_DIM_SCHEME 4061
#define PRO_E_WELD_SPOT_SIDE_SIGNIFICANCE 4062
#define PRO_E_WELD_SPOT_PLACEMENT 4063
#define PRO_E_WELD_SPOT_DIM_SCHEME_TYPE 4064
#define PRO_E_STD_PIPE_LINE 4065
#define PRO_E_WELD_SPOT_STRENGTH 4066
#define PRO_E_WELD_SYMBOL 4070
#define PRO_E_WELD_SYMB_NOTE 4071
#define PRO_E_CBL_LOC_BEND_RAD 4072
#define PRO_E_CBL_LOC_PACK_ANGLE 4073
#define PRO_E_CBL_LOC_SEG_SHAPE 4074
#define PRO_E_PIPE_CONNECT_END_ANGLE 4075
#define PRO_E_PIPE_CONNECT_FROM_MAIN_REF 4076
#define PRO_E_PIPE_CONNECT_TO_MAIN_REF 4077
#define PRO_E_TBEND_CHAIN_HOLDER 4078
#define PRO_E_SPRING_FLIP_U_ANGLE 4079
#define PRO_E_PAT_APPLICATIONS 4080
#define PRO_E_PAT_MFG_TOOL_PATH 4081
#define PRO_E_PAT_MFG_ORD_LEADER 4082
#define PRO_E_PAT_MFG_ORDER_OPT 4083
#define PRO_E_PAT_MFG_FIX_OFFSET 4084
#define PRO_E_PAT_MFG_FIX_OFF_INIT 4085
#define PRO_E_PAT_MFG_FIX_OFF_INCR 4086
#define PRO_E_PLRIB_COMP_THICK 4087
#define PRO_E_PLRIB_THICK_VAL 4088
#define PRO_E_PLRIB_COMP_ANGLE 4089
#define PRO_E_PLRIB_ANGLE 4090
#define PRO_E_PLRIB_ANG_VAL 4091
#define PRO_E_PLRIB_COMP_BOTTOM_ROUND 4092
#define PRO_E_PLRIB_BOTTOM_ROUND 4093
#define PRO_E_PLRIB_BOTTOM_RND_VAL 4094
#define PRO_E_PLRIB_COMP_TOP_ROUND 4095
#define PRO_E_PLRIB_TOP_ROUND 4096
#define PRO_E_PLRIB_ROUND_SHAPE 4097
#define PRO_E_PLRIB_TOP_RND_VAL 4098
#define PRO_E_PLRIB_FLIP 4099
#define PRO_E_PLRIB_BOTTOM_SHAPE 4100
#define PRO_E_PLRIB_EXT_ROUNDS 4101
#define PRO_E_RNDCH_TRANS_HDL_DATA 4102
#define PRO_E_RNDCH_TRANS_HDL_SURF 4103
#define PRO_E_RNDCH_TRANS_HDL_SIDE_OPT 4104
#define PRO_E_RNDCH_TRANS_HDL_CONIC_OPT 4105
#define PRO_E_RNDCH_TRANS_HDL_CONIC_VAL 4106
#define PRO_E_RNDCH_TRANS_HDL_DIST1_OPT 4107
#define PRO_E_RNDCH_TRANS_HDL_DIST1_VAL 4108
#define PRO_E_RNDCH_TRANS_HDL_DIST2_OPT 4109
#define PRO_E_RNDCH_TRANS_HDL_DIST2_VAL 4110
#define PRO_E_RNDCH_TRANS_HDL_LEG1_OPT 4111
#define PRO_E_RNDCH_TRANS_HDL_LEG1_VAL 4112
#define PRO_E_RNDCH_TRANS_HDL_LEG2_OPT 4113
#define PRO_E_RNDCH_TRANS_HDL_LEG2_VAL 4114
#define PRO_E_APPR_AXIS 4115
#define PRO_E_EXIT_AXIS 4116
#define PRO_E_FIRST_SLICE_ONLY 4117
#define PRO_E_LAST_SLICE_ONLY 4118
#define PRO_E_WELD_COLLECTIONS 4119
#define PRO_E_WELD_INTER_WELD_SPACING 4120
#define PRO_E_TOOL_RS_GEN_DEF_CSYS 4121
#define PRO_E_CSYS_DIM_CONSTR_TYPE 4122
#define PRO_E_CSYS_ORIENTSELAXIS2_ROT_OPT 4123
#define PRO_E_CSYS_ORIENTSELAXIS2_ROT 4124
#define PRO_E_PIPE_TO_POINT_MAIN_REF 4125
#define PRO_E_PAT_MFG_ORD_REVERSE 4126
#define PRO_E_PAT_MFG_ORD_ALT_ROWS 4127
#define PRO_E_PAT_MFG_ORD_ALT_DIR 4128
#define PRO_E_PAT_MFG_ORD_SHARED 4129
#define PRO_E_VPDD_PULL_DIR_REF 4130
#define PRO_E_VPDD_PULL_DIR_FLIP 4131
#define PRO_E_VPDD_ATTACH_OPTS 4132
#define PRO_E_VPDD_END_SRFS_OPTS 4133
#define PRO_E_VPDD_EXTENT_CMP 4134
#define PRO_E_VPDD_EXT_OPTS 4135
#define PRO_E_VPDD_EXT_LENGTH 4136
#define PRO_E_VPDD_EXT_REF 4137
#define PRO_E_VPDD_SETS_ARR 4138
#define PRO_E_VPDD_SET_CMP 4139
#define PRO_E_VPDD_HINGES_ARR 4140
#define PRO_E_VPDD_HINGE_CMP 4141
#define PRO_E_VPDD_SPLIT_SRFS_OPTS 4142
#define PRO_E_VPDD_SPLIT_SRFS_REFS 4143
#define PRO_E_VPDD_CONST_OR_VAR_OPTS 4144
#define PRO_E_VPDD_ANGLES_AND_POINTS_ARR 4145
#define PRO_E_VPDD_POINT_AND_ANGLES_CMP 4146
#define PRO_E_VPDD_ANGLES_ARR 4147
#define PRO_E_VPDD_ONE_ANGLE_CMP 4148
#define PRO_E_VPDD_ANG_VAL 4149
#define PRO_E_VPDD_PULL_DIR_CMP 4150
#define PRO_E_CBL_LOC_DEF_TYPE 4151
#define PRO_E_CBL_REGULAR_LOC 4152
#define PRO_E_CBL_SPAWN_LOC 4153
#define PRO_E_CBL_LOC_MAIN_SPAWN_REF 4154
#define PRO_E_CBL_LOC_PREV_SPAWN_REF 4155
#define PRO_E_CBL_LOC_NEXT_SPAWN_REF 4156
#define PRO_E_MFG_APPR_EXIT 4157
#define PRO_E_STEP_APPR_EXIT 4158
#define PRO_E_TOOL_MOTION_TURN_CORNERS 4159
#define PRO_E_TOOL_MOTION_TURN_CHAMFER_CORNER 4160
#define PRO_E_TOOL_MOTION_TURN_FILLET_CORNER 4161
#define PRO_E_TOOL_MOTION_TURN_SHARP_CORNER 4162
#define PRO_E_TOOL_MOTION_TURN_PREV_ENT_ID 4163
#define PRO_E_TOOL_MOTION_TURN_NEXT_ENT_ID 4164
#define PRO_E_TOOL_MOTION_TURN_CUT_OPT_ATTRS 4165
#define PRO_E_WCELL_INPROCESS_PROBING 4166
#define PRO_E_SW_FILL_CNTRS_DISP_CRV 4167
#define PRO_E_WELD_GR_TYPE 4168
#define PRO_E_WELD_GR_PENETRATION 4169
#define PRO_E_WELD_GR_PENETR_OPT 4170
#define PRO_E_WELD_GR_ROOT_PENETR 4171
#define PRO_E_WELD_GR_WELD_SIZE 4172
#define PRO_E_WELD_IS_TAN_PROP 4173
#define PRO_E_WELD_GR_SHAPE 4174
/*
#define PRO_E_WELD_GR_WIDTH see below
*/
#define PRO_E_WELD_GR_FACE_OFFSET 4175
#define PRO_E_WELD_GR_ROOT_OPEN 4176
#define PRO_E_WELD_GR_PREP_ANG 4177
#define PRO_E_WELD_GR_PREP_DEPTH 4178
#define PRO_E_WELD_GR_FLARE_SIZE 4179
/*
#define PRO_E_WELD_GR_IS_EDGE_PREP_ALLOWED see below
*/
#define PRO_E_WELD_GR_EDGE_PREP 4180
#define PRO_E_WELD_GR_SIDE1_REF_OPT 4181
#define PRO_E_WELD_GR_SIDE2_REF_OPT 4182
#define PRO_E_WELD_GR_BACK 4183
#define PRO_E_WELD_GR_BACKING 4184
#define PRO_E_WELD_GR_BACK_CONTOUR 4185
#define PRO_E_WELD_GR_BACK_FINISH 4186
#define PRO_E_C3D_VERT_RAD 4187
#define PRO_E_TOOL_RS_GEN_DIRECTION 4188
#define PRO_E_TOOL_RS_GEN_DIR_FLAG 4189
#define PRO_E_TOOL_RS_GEN_ROTATE 4190
#define PRO_E_STD_PIP_PREV_FEAT 4191
#define PRO_E_PIPE_FOLLOW_PIPE 4192
#define PRO_E_PIPE_FOLLOW_PIPE_FIRST_MAIN_ENTRY 4193
#define PRO_E_PIPE_FOLLOW_PIPE_SECOND_MAIN_ENTRY 4194
#define PRO_E_PIPE_FOLLOW_PIPE_MAIN_REF 4195
#define PRO_E_PIPE_FOLLOW_PIPE_MAIN_OPT 4196
#define PRO_E_PIPE_FOLLOW_PIPE_TRANS_CONSTRAINT 4197
#define PRO_E_PIPE_FOLLOW_PIPE_TRANS_REF 4198
#define PRO_E_PIPE_FOLLOW_PIPE_TRANS_LENGTH 4199
#define PRO_E_BELT_PULLEY_DIAM_COINCIDENT 4200
#define PRO_E_WELD_PLUGSLOT_TYPE 4201
#define PRO_E_WELD_PLUGSLOT_REFERENCES 4202
#define PRO_E_WELD_PLUGSLOT_BASE_PLANE 4203
#define PRO_E_WELD_PLUGSLOT_SIDE_PLACEMENT 4204
#define PRO_E_WELD_PLUGSLOT_SIDE_PLACEMENT_TYPE 4205
#define PRO_E_WELD_PLUGSLOT_SIDE_SURFS 4206
#define PRO_E_WELD_PLUGSLOT_CONTOUR 4207
#define PRO_E_WELD_PLUGSLOT_CONTOUR_REFS 4208
#define PRO_E_WELD_PLUGSLOT_FOLLOW_PATTERN 4209
#define PRO_E_WELD_PLUGSLOT_DEPTH 4210
#define PRO_E_WELD_PLUGSLOT_DEPTH_TYPE 4211
#define PRO_E_WELD_PLUGSLOT_DEPTH_VAL 4212
#define PRO_E_WELD_PLUGSLOT_DIAMETER 4213
#define PRO_E_WELD_PLUGSLOT_COUNTERSINK 4214
#define PRO_E_HOLESET_CUSTOM_CYCLE_PLATES 4215
#define PRO_E_HOLESET_CUSTOM_CYCLE_REFERENCES 4216
#define PRO_E_HOLESET_CUSTOM_CYCLE_REF 4217
#define PRO_E_HOLESET_CUSTOM_CYCLE_PLATE_NAME 4218
#define PRO_E_HOLESET_CUSTOM_CYCLE_REF_OPT 4219
#define PRO_E_HOLESET_CUSTOM_CYCLE_REF_SEL 4220
#define PRO_E_HOLESET_CUSTOM_CYCLE_REF_Z_OFFSET 4221
#define PRO_E_HOLESET_CUSTOM_CYCLE_VARIABLES 4222
#define PRO_E_HOLESET_CUSTOM_CYCLE_VAR 4223
#define PRO_E_HOLESET_CUSTOM_CYCLE_VAR_VALUE 4224
#define PRO_E_GMRG_SMT_TYPE 4225
#define PRO_E_GMRG_FORM_AUTO_ROUNDS 4226
#define PRO_E_FORM_PLACEMENT_TYPE 4227
#define PRO_E_FORM_CSYS_PLACE 4228
#define PRO_E_SMT_FILLET_INTERSECT 4229
#define PRO_E_SMT_FILLET_QUILT 4230
#define PRO_E_SMT_FILLET_BORDER 4231
#define PRO_E_SMT_FILLET_SELECT 4232
#define PRO_E_SMT_FILLET_RADIUS_VALUE 4233
#define PRO_E_SMT_FILLET_RADIUS_SIDE 4234
#define PRO_E_SMT_FILLET_RADIUS_USEFLAG 4235
#define PRO_E_WELD_LW_AUTO 4236
#define PRO_E_SRF_OFFSET_ATTACH_APPROX_SRF 4237
#define PRO_E_HOLESET_ORIENT_REF 4238
#define PRO_E_MFG_COMBINED_SURFACES 4239
#define PRO_E_STEP_COMBINED_SURFACES 4240
#define PRO_E_DRILL_MODE 4241
#define PRO_E_VPDD_HINGE_FLIP 4242
#define PRO_E_PIPE_FOLLOW_PIPE_STRATEGY 4243
#define PRO_E_CG_SOLIDIFY 4244
#define PRO_E_HOLESET_ORIENT_TYPE 4245
#define PRO_E_WELD_IS_INTER 4246
#define PRO_E_WELD_STANDARD 4247
#define PRO_E_GEOMPAT_SOLIDIFY_OPT 4248
#define PRO_E_CBL_MULTILOC_SEGS 4250
#define PRO_E_CBL_MULTILOC_SEG 4251
#define PRO_E_CBL_MULTILOC_CABLE_ID 4252
#define PRO_E_CBL_MULTILOC_SEG_DATA 4253
#define PRO_E_CBL_LOCATION_FEATURE_ARRAY 4254
#define PRO_E_CBL_LOCATION_FEATURE 4255
#define PRO_E_CBL_RS_FEAT_GEN_TOOL_MODE 4256
#define PRO_E_CBL_LOCATION_SEG_SEL 4257
#define PRO_E_WELD_GR_WIDTH 4258
#define PRO_E_WELD_GR_IS_EDGE_PREP_ALLOWED 4259
#define PRO_E_GENPAT_TABLE_INSTANCES 4260
#define PRO_E_GENPAT_TABLE_INSTANCE 4261
#define PRO_E_GENPAT_TABLE_INSTANCE_INDEX 4262
#define PRO_E_GENPAT_TABLE_INSTANCE_DIMS 4263
#define PRO_E_GENPAT_TABLE_INSTANCE_DIM_VALUE 4264
#define PRO_E_PIPE_CONNECT_DIMS_SCHEME 4265
#define PRO_E_CBL_NETWORK_SEG 4266
#define PRO_E_CBL_NETWORK_SEGS_ARRAY 4267
#define PRO_E_SW_FAILED_SLD_OPT 4268
#define PRO_E_TOOL_RS_GEN_PORT_SEL 4269
#define PRO_E_WELD_JOINT_STATUS 4270
#define PRO_E_MACH_SURFS 4271
#define PRO_E_MACH_SCALLOP_SURFS 4272
#define PRO_E_MACH_SURF_REF 4273
#define PRO_E_MACH_SURF_REF_TYPE 4274
#define PRO_E_MACH_SURF_PREV_STEP 4275
#define PRO_E_MILL_WINDOW 4276
#define PRO_E_MILL_SRF_FLIP 4277
#define PRO_E_NC_SRF_SIDE_ARR 4278
#define PRO_E_NC_SRF_SIDE 4279
#define PRO_E_NC_SRF_SIDE_REF 4280
#define PRO_E_NC_SRF_SIDE_VAL 4281
#define PRO_E_MFG_MACH_SURFS 4282
#define PRO_E_MFG_MACH_SCALLOP_SURFS 4283
#define PRO_E_MACH_SRF_FLIP 4284
#define PRO_E_MACH_SURF_COMP 4285
#define PRO_E_MACH_SURF_OPT 4286
/* D3Elem elements */
#define PRO_E_D3ELEM_SETS 4300
#define PRO_E_D3ELEM_SET 4301
#define PRO_E_D3ELEM_PLACEMENT_REFERENCE 4302
#define PRO_E_D3ELEM_ORIENTATION_REFERENCE 4303
#define PRO_E_D3ELEM_MOVES 4306
#define PRO_E_D3ELEM_MOVE 4307
#define PRO_E_D3ELEM_MOVE_TYPE 4308
#define PRO_E_D3ELEM_MOVE_VALUE 4309
/* FlexMove feature */
#define PRO_E_FLEXMOVE_EXCLUDED_GEOMETRY 4310
#define PRO_E_WELD_INTER_LIN_ANG_OPT 4311
#define PRO_E_CBL_DEFINED_CACHE 4312
#define PRO_E_WELD_MEASURES 4313
#define PRO_E_WELD_FIX_INDEX 4314
#define PRO_E_WELD_PLUGSLOT_SLOT_LENGTH 4315
/* Curve from Equation feature */
#define PRO_E_CRV_FR_EQ_REF_CSYS 4316
#define PRO_E_CRV_FR_EQ_CSYS_TYPE 4317
#define PRO_E_CRV_FR_EQ_PARAM_MIN 4318
#define PRO_E_CRV_FR_EQ_PARAM_MAX 4319
/* MFG features */
#define PRO_E_CUTLINE_TP_OPTIONS 4320
#define PRO_E_CUTLINE_TP_METHOD_OPT 4321
#define PRO_E_CUTLINE_TP_TOOL_CENTER_OPT 4323
#define PRO_E_CUTLINE_TP_EXTEND_OPT 4324
#define PRO_E_CUTLINE_CUT_DEFINITION 4325
#define PRO_E_CUTLINE_CUT_PLACEMENT_OPT 4327
#define PRO_E_CUTLINE_REF_ARR 4328
#define PRO_E_CUTLINE_REF_ITEM 4329
#define PRO_E_CUTLINE_REF_TYPE 4330
#define PRO_E_CUTLINE_REF_DRIVE_SURF 4331
#define PRO_E_CUTLINE_REF_DTM_CURVE 4332
#define PRO_E_CUTLINE_ID 4334
#define PRO_E_CUTLINE_ALT_SRFS 4335
#define PRO_E_CUTLINE_USE_ALT_SRFS 4336
#define PRO_E_CUTLINE_PROJ_PLN 4337
#define PRO_E_CUTLINE_SYNC_ARR 4338
#define PRO_E_CUTLINE_SYNC_ITEM 4339
#define PRO_E_CUTLINE_SYNC_ID 4340
#define PRO_E_CUTLINE_SYNC_NAME 4341
#define PRO_E_CUTLINE_SYNC_TYPE 4342
#define PRO_E_CUTLINE_SYNC_POINT_ARR 4343
#define PRO_E_CUTLINE_SYNC_POINT 4344
#define PRO_E_CUTLINE_SYNC_POINT_REF_ID 4345
#define PRO_E_CUTLINE_SYNC_POINT_RATIO 4346
#define PRO_E_CUTLINE_SYNC_REF 4347
#define PRO_E_NCSEQ_CSYS 4350
#define PRO_E_OPER_CSYS 4351
#define PRO_E_RETR_SURF 4352
#define PRO_E_RETR_SURF_TYPE 4353
#define PRO_E_RETR_SURF_REF 4354
#define PRO_E_RETR_SURF_ORIENT 4355
#define PRO_E_RETR_SURF_VALUE 4356
#define PRO_E_OPER_SUBSP_CSYS 4358
#define PRO_E_MFG_TOOL_REF_COMPOUND 4370
#define PRO_E_MFG_TOOL_REF_POCKET 4371
#define PRO_E_MFG_TOOL_REF_ID 4372
#define PRO_E_MFG_TOOL_REF_HEAD_NUM 4373
#define PRO_E_MFG_TOOL_ADAPTER_NAME 4378
#define PRO_E_MFG_PREV_TOOL_ID 4379
#define PRO_E_MACH_SRFS 4380
#define PRO_E_TURN_PROFILE 4381
#define PRO_E_MFG_START_PNT 4382
#define PRO_E_MFG_END_PNT 4383
#define PRO_E_MFG_OPER_REF 4384
#define PRO_E_MFG_WCELL_REF 4385
#define PRO_E_MFG_SEQ_NUM_AXES_OPT 4386
#define PRO_E_DRILL_HOLESETS_OPT 4387
#define PRO_E_MFG_TOOL_MOTIONS_OPT 4388
#define PRO_E_SCALLOP_SURF_COLL 4389
#define PRO_E_MFG_CMP_APPROACH_EXIT 4390
#define PRO_E_MFG_CMP_APPROACH 4391
#define PRO_E_MFG_APPROACH_AXIS 4392
#define PRO_E_MFG_FIRST_SLICE_ONLY 4393
#define PRO_E_MFG_CMP_EXIT 4394
#define PRO_E_MFG_EXIT_AXIS 4395
#define PRO_E_MFG_LAST_SLICE_ONLY 4396
#define PRO_E_MFG_4_AXIS_PLANE 4397
#define PRO_E_MFG_START_HEIGHT 4398
#define PRO_E_MFG_HEIGHT 4399
#define PRO_E_MFG_CMP_MILL_WIND 4400
#define PRO_E_MFG_MILL_WIND 4401
#define PRO_E_MFG_EXCL_SRF_COLL 4402
#define PRO_E_MFG_PREV_SEQ 4403
#define PRO_E_MFG_COMMENTS 4404
#define PRO_E_MFG_CMP_CLOSED_LOOPS 4405
#define PRO_E_MFG_CLOSED_LOOPS_ARR 4406
#define PRO_E_MFG_CLOSED_LOOP_REF_ITEM 4407
#define PRO_E_MFG_CLOSED_LOOP_ID 4408
#define PRO_E_MFG_MILL_WIND_SRF 4410
#define PRO_E_TOOL_MTN_ARR 4500
#define PRO_E_TOOL_MTN 4501
#define PRO_E_TOOL_MTN_TYPE 4502
#define PRO_E_TOOL_MTN_ID 4503
#define PRO_E_TOOL_MTN_APPL_DATA 4504
#define PRO_E_TOOL_MTN_PNT_REF 4505
#define PRO_E_TOOL_MTN_OFFSET 4506
#define PRO_E_TOOL_MTN_X_OFFSET 4507
#define PRO_E_TOOL_MTN_Y_OFFSET 4508
#define PRO_E_TOOL_MTN_Z_OFFSET 4509
#define PRO_E_TOOL_MTN_AXIS_MOVES 4510
#define PRO_E_TOOL_MTN_AXIS_DIR 4511
#define PRO_E_TOOL_MTN_REF_IDX 4512
#define PRO_E_TOOL_MTN_CRV_REF 4513
#define PRO_E_TOOL_MTN_CRV_DIR 4514
#define PRO_E_TOOL_MTN_SRF_REF 4515
#define PRO_E_TOOL_MTN_AXIS_REF 4516
#define PRO_E_TOOL_MTN_CL_CMD 4517
#define PRO_E_TOOL_MTN_CL_CMD_STR 4518
#define PRO_E_TOOL_MTN_CL_CMD_LOC_TYPE 4519
#define PRO_E_TOOL_MTN_CL_CMD_PARAM 4520
#define PRO_E_TOOL_MTN_TURN_PROF 4521
#define PRO_E_TOOL_MTN_TURN_PROF_REF 4522
#define PRO_E_TOOL_MTN_TURN_PROF_S_VAL 4523
#define PRO_E_TOOL_MTN_TURN_PROF_E_VAL 4524
#define PRO_E_TOOL_MTN_TURN_PROF_S_REF 4525
#define PRO_E_TOOL_MTN_TURN_PROF_E_REF 4526
#define PRO_E_TOOL_MTN_TURN_CORNER_TYPE 4527
#define PRO_E_TOOL_MTN_TURN_CORNER_ARR 4528
#define PRO_E_TOOL_MTN_TURN_CORNER 4529
#define PRO_E_TOOL_MTN_TURN_PREV_ENT_ID 4530
#define PRO_E_TOOL_MTN_TURN_NEXT_ENT_ID 4531
#define PRO_E_TOOL_MTN_TURN_CORNER_VAL 4532
#define PRO_E_TOOL_MTN_TURN_STK_BND_REF 4533
#define PRO_E_TOOL_MTN_TURN_EXT 4534
#define PRO_E_TOOL_MTN_TURN_S_EXT 4535
#define PRO_E_TOOL_MTN_TURN_E_EXT 4536
#define PRO_E_TOOL_MTN_REF_ID 4537
#define PRO_E_TOOL_MTN_PROFILE_TYPE 4538
#define PRO_E_TOOL_MTN_PARENT_REF_ID 4539
#define PRO_E_TOOL_MTN_GOTO_AXIS_REF 4540
#define PRO_E_TOOL_MTN_FEED_TYPE 4541
#define PRO_E_MFG_PARAM_ARR 4570
#define PRO_E_MFG_PARAM_COMPOUND 4571
#define PRO_E_MFG_PRM_NAME 4572
#define PRO_E_MFG_PRM_VAL_DBL 4573
#define PRO_E_MFG_PRM_VAL_STR 4574
#define PRO_E_MFG_PRM_ATTR 4575
#define PRO_E_DRILL_GRP_PARAM_RULE_OPT 4577
#define PRO_E_DRILL_GRP_DIAM_TYPE_OPT 4578
#define PRO_E_DRILL_GRP_PARAM_VAL_BOOL 4579
#define PRO_E_DRILL_GRP_AXES_INDIV 4580
#define PRO_E_DRILL_GRP_AXES_EXCL 4581
#define PRO_E_DRILL_GRP_AXES_PATTERN 4582
#define PRO_E_DRILL_GRP_SURFACES 4583
#define PRO_E_DRILL_GRP_CSYS 4584
#define PRO_E_DRILL_GRP_DIAM_ARR 4585
#define PRO_E_DRILL_GRP_DIAM_COPMPOUND 4586
#define PRO_E_DRILL_GRP_DIAM 4587
#define PRO_E_DRILL_GRP_PARAM_ARR 4588
#define PRO_E_DRILL_GRP_PARAM_COMPOUND 4589
#define PRO_E_DRILL_GRP_PARAM_NAME 4590
#define PRO_E_DRILL_GRP_PARAM_DATA_TYPE 4591
#define PRO_E_DRILL_GRP_PARAM_OPER 4592
#define PRO_E_DRILL_GRP_PARAM_VAL_INT 4594
#define PRO_E_DRILL_GRP_PARAM_VAL_DBL 4595
#define PRO_E_DRILL_GRP_PARAM_VAL_WSTR 4596
#define PRO_E_DRILL_GRP_RULES_COMPOUND 4597
#define PRO_E_DRILL_GRP_AXES_COMPOUND 4598
#define PRO_E_MFG_FROM1_PNT 4599
#define PRO_E_MFG_HOME1_PNT 4600
#define PRO_E_MFG_FROM2_PNT 4601
#define PRO_E_MFG_HOME2_PNT 4602
#define PRO_E_TURN_THREAD_LOCATION_TYPE 4650
#define PRO_E_TURN_THREAD_OUTPUT_TYPE 4651
#define PRO_E_TURN_THREAD_FORM_TYPE 4652
#define PRO_E_MFG_WCELL_ENABLE_MILL_OPT 4671
#define PRO_E_MFG_WCELL_NUM_AXES 4672
#define PRO_E_MFG_LATHE_DIR_OPT 4673
#define PRO_E_MFG_MILLTURN_HEADS 4674
#define PRO_E_MFG_MILLTURN_HEAD_1 4675
#define PRO_E_WCELL_HEAD_MILL_OPT 4676
#define PRO_E_WCELL_HEAD_FLASH_OPT 4677
#define PRO_E_WCELL_HEAD_ROT_POS_OPT 4678
#define PRO_E_MFG_MILLTURN_HEAD_2 4679
#define PRO_E_MILLTURN_TOOL_ROT_DIR_OPT 4680
#define PRO_E_MFG_WCELL_NUM_HEADS 4681
#define PRO_E_MFG_WCELL_ENABLE_CMM_OPT 4683
#define PRO_E_MFG_WCELL_NUM_SPINDLES 4684
#define PRO_E_MFG_WCELL_ENABLE_TURN_OPT 4685
#define PRO_E_MFG_MILLTURN_HEAD_3 4686
#define PRO_E_MFG_MILLTURN_HEAD_4 4687
#define PRO_E_WCELL_HEAD_TURN_OPT 4688
#define PRO_E_WCELL_HEAD_BELOW_CLINE 4689
#define PRO_E_MFG_WCELL_ENABLE_SWISS_TURN_OPT 4690
#define PRO_E_MFG_CURVE_FEAT 4730
/* Bushing load feature (Pro/MECHANISM) */
#define PRO_E_BUSHLD_REF 4820
#define PRO_E_BUSHLD_T1_DMP_COEFF 4821
#define PRO_E_BUSHLD_T2_DMP_COEFF 4822
#define PRO_E_BUSHLD_T3_DMP_COEFF 4823
#define PRO_E_BUSHLD_R1_DMP_COEFF 4824
#define PRO_E_BUSHLD_R2_DMP_COEFF 4825
#define PRO_E_BUSHLD_R3_DMP_COEFF 4826
#define PRO_E_BUSHLD_T1_STF_COEFF 4827
#define PRO_E_BUSHLD_T2_STF_COEFF 4828
#define PRO_E_BUSHLD_T3_STF_COEFF 4829
#define PRO_E_BUSHLD_R1_STF_COEFF 4830
#define PRO_E_BUSHLD_R2_STF_COEFF 4831
#define PRO_E_BUSHLD_R3_STF_COEFF 4832
#define PRO_E_CRV_FROM_XSEC_REF_XSEC 4833
/* New cosmetic thread elements */
#define PRO_E_THRD_DIAM_NEW 4900
#define PRO_E_THRD_START_REF_NEW 4901
#define PRO_E_THRD_SURF_NEW 4902
#define PRO_E_THRD_DEP_COMP_NEW 4903
#define PRO_E_THRD_DEP_OPT_NEW 4904
#define PRO_E_THRD_FLIP_OPT_NEW 4905
#define PRO_E_THRD_DEP_VAL_NEW 4906
#define PRO_E_THRD_END_REF 4907
#define PRO_E_THRD_NOTE_PARAMS_NEW 4908
#define PRO_E_REF_ATTACH_PRIM_QLT 4909
#define PRO_E_REF_ATTACH_MERG_QLT 4910
#define PRO_E_OPT_ATTACH_OPER 4911
#define PRO_E_FLXSUBST_SUBSTING_QUILT 4912
#define PRO_E_FLXSUBST_RCR_RND_FLAG 4913
#define PRO_E_OPT_ATTACH_RMV_MAT 4914
#define PRO_E_SMT_RIP_TYPE 4915
#define PRO_E_OPT_ATTACH_PQ_DIR 4916
#define PRO_E_OPT_ATTACH_MGQ_DIR 4917
/* New Axis Control elements */
#define PRO_E_CUTLINE_AXIS_CTRL 4919
#define PRO_E_CUTLINE_CTRL_PLANE 4920
#define PRO_E_TOOL_AXIS_DEF 4921
#define PRO_E_TOOL_AXIS_REF 4922
#define PRO_E_TOOL_AXIS_LOC_ARR 4923
#define PRO_E_TOOL_AXIS_LOC_ITEM 4924
#define PRO_E_TOOL_AXIS_LOC_SRF_REF 4925
#define PRO_E_TOOL_AXIS_LOC_ID 4926
#define PRO_E_TOOL_AXIS_LOC_TYPE 4927
#define PRO_E_TOOL_AXIS_LOC_CUT_ID 4928
#define PRO_E_TOOL_AXIS_LOC_RAT 4929
#define PRO_E_TOOL_AXIS_LOC_PNT_REF 4930
#define PRO_E_TOOL_AXIS_LOC_ENDS 4931
/* Helical Sweep */
#define PRO_E_HLSWP_SK_ORIENT_OPT 4932
#define PRO_E_HLSWP_TRIM_QUILT 4933
#define PRO_E_HLSWP_ARR 4934
#define PRO_E_HLSWP_PITCH_VAL 4935
#define PRO_E_HLSWP_PITCH_REF_OPT 4936
#define PRO_E_HLSWP_DBL_PARAM 4937
#define PRO_E_HLSWP_PITCH_REF 4938
#define PRO_E_HLSWP_SWP_SECTION 4939
#define PRO_E_HLSWP_CMPS 4940
#define PRO_E_HLSWP_REF_VALUE 4941
#define PRO_E_HLSWP_SEC_OPT 4942
#define PRO_E_HLSWP_HAND_OPT 4943
#define PRO_E_HLSWP_SKET_FLIP_OPT 4944
#define PRO_E_MFG_GEOM_REF 4949
#define PRO_E_REF_START 4950
#define PRO_E_REF_END 4951
#define PRO_E_REF_CLSPLN 4952
#define PRO_E_OPT_ATTR 4953
#define PRO_E_MFG_USER_DEF_PNT 4954
#define PRO_E_OPT_REFCSYS 4955
#define PRO_E_MFG_SELTYP 4956
#define PRO_E_MFG_CLS_PLN_OPT 4957
#define PRO_E_MFG_U_PNT 4958
#define PRO_E_MFG_V_PNT 4959
#define PRO_E_MFG_EDIT_PNT 4960
#define PRO_E_MFG_UDP_COL 4961
#define PRO_E_MFG_UDL_COL 4962
#define PRO_E_SMT_DIMENSION_TYPE 4963
#define PRO_E_SMT_DIMENSION_VALUE 4964
#define PRO_E_SMT_EDGE_REFERENCES 4965
#define PRO_E_SMT_EDGE_RIP_ARRAY 4966
#define PRO_E_SMT_EDGE_RIP_SET 4967
#define PRO_E_SMT_EDGE_BEND_ARRAY 4968
#define PRO_E_SMT_EDGE_BEND_SET 4969
/* Corner Chamfer */
#define PRO_E_CRN_CHMF_CORNER PRO_E_STD_CORNER_CHAMF_CORNER
#define PRO_E_CRN_CHMF_DIM1 PRO_E_STD_CORNER_CHAMF_EDGE1
#define PRO_E_CRN_CHMF_DIM2 PRO_E_STD_CORNER_CHAMF_EDGE2
#define PRO_E_CRN_CHMF_DIM3 PRO_E_STD_CORNER_CHAMF_EDGE3
#define PRO_E_THRD_TYPE_OPT_NEW 4974
#define PRO_E_THRD_SERIES_NEW 4975
#define PRO_E_THRD_SCREWSIZE_NEW 4976
/* Vertex Round */
#define PRO_E_VERTEX_ROUND_VERT 4977
#define PRO_E_VERTEX_ROUND_RADIUS 4978
/* Modify Round elements */
#define PRO_E_MODRND_RAD_VAL 4979
/* New Axis Control elements */
#define PRO_E_CLAC_TYPE 4980
#define PRO_E_CLAC_PNT_REF 4981
#define PRO_E_CLAC_CRV_REF 4982
#define PRO_E_CLAC_SYNC_ARR 4983
#define PRO_E_CLAC_SYNC_ITEM 4984
#define PRO_E_CLAC_SYNC_ID 4985
#define PRO_E_CLAC_SYNC_CRV_REF 4986
#define PRO_E_CLAC_SYNC_CRV_RATIO 4987
#define PRO_E_CLAC_SYNC_CUT_REF 4988
#define PRO_E_CLAC_SYNC_CUT_ID 4989
#define PRO_E_CLAC_SYNC_CUT_RATIO 4990
#define PRO_E_CLAC_LOC_CTRL 4991
#define PRO_E_CLAC_DRV_SRF_ARR 4992
#define PRO_E_CLAC_DRV_SRF_ITEM 4993
#define PRO_E_CLAC_DRV_SRF_ID 4994
#define PRO_E_CLAC_LOC_ARR 4995
#define PRO_E_CLAC_LOC_ITEM 4996
#define PRO_E_CLAC_LOC_ID 4997
#define PRO_E_CLAC_LOC_SRF_ID 4998
#define PRO_E_CLAC_DIR_FLIP 4999
#define PRO_E_CLAC_LOC_TYPE 5000
#define PRO_E_CLAC_LOC_CUT_REF 5001
#define PRO_E_CLAC_LOC_CUT_ID 5002
#define PRO_E_CLAC_LOC_CUT_RATIO 5003
#define PRO_E_CLAC_LOC_PNT_REF 5004
#define PRO_E_CLAC_LOC_CRV_REF 5005
#define PRO_E_CLAC_LOC_CRV_RATIO 5006
#define PRO_E_CLAC_LOC_CRV_ENDS 5007
#define PRO_E_CLAC_DIR_TYPE 5008
#define PRO_E_CLAC_DIR_PNT_REF 5009
#define PRO_E_CLAC_DIR_ORTS 5010
#define PRO_E_CLAC_DIR_I_VAL 5011
#define PRO_E_CLAC_DIR_J_VAL 5012
#define PRO_E_CLAC_DIR_K_VAL 5013
#define PRO_E_CLAC_DIR_CRV_REF 5014
#define PRO_E_CLAC_DIR_CRV_RATIO 5015
/* import feature dash element */
#define PRO_E_IMP_FEAT_REF_CSYS 5016
#define PRO_E_IMP_FEAT_MK_SOLID_OPT 5017
#define PRO_E_CORNER_RELIEFS 5018
#define PRO_E_CORNER_RELIEFS_CR_STATE 5019
#define PRO_E_CORNER_RELIEFS_DIM_SCHEME 5020
#define PRO_E_CORNER_RELIEFS_ARR 5021
#define PRO_E_CORNER_RELIEF_SET 5022
#define PRO_E_CORNER_RELIEF_REF_ARR 5023
#define PRO_E_CORNER_RELIEF_REF_SET 5024
#define PRO_E_CORNER_RELIEF_REF_TYPE 5025
#define PRO_E_CORNER_RELIEF_REF_FLAT 5026
#define PRO_E_CORNER_RELIEF_REF_BND_1 5027
#define PRO_E_CORNER_RELIEF_REF_BND_2 5028
#define PRO_E_CORNER_RELIEF_REF_EDGE_1 5029
#define PRO_E_CORNER_RELIEF_REF_EDGE_PRM 5030
#define PRO_E_CORNER_RELIEF_DEFINE 5032
/* Modify Analytic Geometry elements */
#define PRO_E_MAG_ANGLE_VAL 5033
#define PRO_E_MAG_RADII_VAL 5034
#define PRO_E_MAG_RADII2_VAL 5035
#define PRO_E_FIXTURE_COMPONENT_ARR 5036
#define PRO_E_FIXTURE_COMPONENT 5037
#define PRO_E_FIXTURE_COMPONENT_REF 5038
#define PRO_E_MFG_TRAJ_CRV 5039
#define PRO_E_MFG_TRAJ_DIR_FLIP 5040
#define PRO_E_MFG_TRAJ_OFFSET 5041
#define PRO_E_MFG_TRAJ_MAT_SIDE 5042
#define PRO_E_MAG_ATTACHMENT 5043
#define PRO_E_SMT_EXTEND_WALL_EDGE 5044
#define PRO_E_SMT_EXTEND_WALL_DIST 5045
#define PRO_E_SMT_EXTEND_DIST_TYPE 5046
#define PRO_E_SMT_EXTEND_DIST_VALUE 5047
#define PRO_E_SMT_EXTEND_DIST_REF 5048
#define PRO_E_SMT_EXTEND_ADJUST_SRF 5049
/* Bend feature */
#define PRO_E_SMT_BEND_FORM 5050
#define PRO_E_SMT_BEND_DIRECTION 5051
#define PRO_E_SMT_BEND_FIXED_SIDE 5052
#define PRO_E_SMT_BEND_LOCATION 5053
#define PRO_E_SMT_BEND_LINE 5054
#define PRO_E_SMT_BEND_LINE_TYPE 5055
#define PRO_E_SMT_BEND_CURVE 5056
#define PRO_E_SMT_BEND_CURVE_USE_OFFSET 5057
#define PRO_E_SMT_BEND_CURVE_OFFSET_VALUE 5058
#define PRO_E_SMT_BEND_REF_SURFACE 5059
#define PRO_E_SMT_BEND_TRANS_AREAS 5060
#define PRO_E_SMT_BEND_TRANS_FLIP 5061
#define PRO_E_SMT_BEND_ANGLE_TYPE 5062
#define PRO_E_SMT_BEND_ANGLE_VALUE 5063
#define PRO_E_SMT_BEND_TRANS_SET 5064
/* Shut off srf feature dash elements. */
#define PRO_E_SHUT_SRF_SRF_REFS 5069
#define PRO_E_SHUT_SRF_CRV_REFS 5070
#define PRO_E_SHUT_SRF_REF_TYPE 5071
#define PRO_E_SHUT_SRF_CLOSE_ALL 5072
#define PRO_E_SHUT_SRF_CAP_SRFS 5073
#define PRO_E_SHUT_SRF_ARR_COLL_CRV 5074
#define PRO_E_SHUT_SRF_COLL_CRV_CMP 5075
/* Mirror Geometry feature */
#define PRO_E_MGF_MIRROR_PLANE 5076
#define PRO_E_MGF_REMOVE_GEOM 5077
#define PRO_E_MGF_CLOSE_GEOM 5078
#define PRO_E_MGF_ATTACH_GEOM 5079
#define PRO_E_MGF_CREATE_RND_GEOM 5080
/* Bend feature - internal bend line elements */
#define PRO_E_SMT_BEND_LINE_INTERNAL 5081
#define PRO_E_SMT_BEND_LINE_REF_END1 5082
#define PRO_E_SMT_BEND_LINE_REF_END2 5083
#define PRO_E_SMT_BEND_LINE_REF_OFFSET1 5084
#define PRO_E_SMT_BEND_LINE_REF_OFFSET2 5085
#define PRO_E_SMT_BEND_LINE_REF_OFFSET1_VALUE 5086
#define PRO_E_SMT_BEND_LINE_REF_OFFSET2_VALUE 5087
/* import feature additional elements */
#define PRO_E_IMP_FEAT_RMV_MATERIAL_OPT 5088
#define PRO_E_SMT_FLATTEN_REF_TYPE 5089
#define PRO_E_STEP_STAMPED_TREAT_EDGE 5090
#define PRO_E_TOOL_MTN_TURN_PROF_S_ORIENT 5091
#define PRO_E_TOOL_MTN_TURN_PROF_E_ORIENT 5092
#define PRO_E_TOOL_MTN_TURN_PROF_OFFSET_CUT 5093
#define PRO_E_TOOL_MTN_TURN_DFLT_CORNER_TYPE 5094
#define PRO_E_MFG_TRAJ_SRFS 5095
/* Tapered Extrude */
#define PRO_E_EXT_COMP_DRFT_ANG 5096
#define PRO_E_EXT_DRFT_ANG 5097
#define PRO_E_EXT_DRFT_ANG_VAL 5098
#define PRO_E_SMT_PUNCH_TOOL_ATTR 5099
#define PRO_E_SMT_PUNCH_TOOL_NAME 5100
#define PRO_E_SMT_PUNCH_TOOL_DATA 5101
#define PRO_E_SMT_MERGE_AUTO 5102
#define PRO_E_SMT_MERGE_KEEP_LINES 5103
#define PRO_E_SMT_MERGE_DATA 5104
/* advanced contact steps */
#define PRO_E_C3D_REF1_RECS 5105
#define PRO_E_C3D_REF2_RECS 5106
#define PRO_E_C3D_REF_REC 5107
#define PRO_E_C3D_REF 5108
#define PRO_E_C3D_REF_FULL_GEOM 5109
#define PRO_E_C3D_REF_FLIP 5110
#define PRO_E_SMT_DRV_SURF 5111
#define PRO_E_SMT_PUNCH_AXIS_PNT 5112
/* Curve Through Points */
#define PRO_E_CRV_TP_ON_SURF 5120
#define PRO_E_CRV_TP_ON_SURF_REF 5121
#define PRO_E_CRV_TP_TWEAK 5122
#define PRO_E_CRV_TP_PNTS 5123
#define PRO_E_CRV_TP_PNT 5124
#define PRO_E_CRV_TP_PNT_REF 5125
#define PRO_E_CRV_TP_PNT_CONN_TYPE 5126
#define PRO_E_CRV_TP_PNT_RAD_VAL 5127
#define PRO_E_CRV_TP_START 5128
#define PRO_E_CRV_TP_START_TYPE 5129
#define PRO_E_CRV_TP_START_REF 5130
#define PRO_E_CRV_TP_START_FLIP 5131
#define PRO_E_CRV_TP_START_PERP 5132
#define PRO_E_CRV_TP_START_PERP_REF 5133
#define PRO_E_CRV_TP_START_PERP_FLIP 5134
#define PRO_E_CRV_TP_END 5135
#define PRO_E_CRV_TP_END_TYPE 5136
#define PRO_E_CRV_TP_END_REF 5137
#define PRO_E_CRV_TP_END_FLIP 5138
#define PRO_E_CRV_TP_END_PERP 5139
#define PRO_E_CRV_TP_END_PERP_REF 5140
#define PRO_E_CRV_TP_END_PERP_FLIP 5141
/* Smt Extend Wall*/
#define PRO_E_SMT_EXTEND_WALL_EXTENSIONS_CMP 5142
#define PRO_E_SMT_EXTEND_SIDE1_EXTENSION_CMP 5143
#define PRO_E_SMT_EXTEND_EXTENSION_TYPE_OPT 5144
#define PRO_E_SMT_EXTEND_SIDE2_EXTENSION_CMP 5145
#define PRO_E_CORNER_RELIEF_DESIGNATE 5146
/* FLXMDL 'Force Attach Option' Chaincoll related elems */
#define PRO_E_FLEX_ATT_CHNS_CMP 5149
#define PRO_E_FLEX_SIDE_SRFS_CMP 5150
#define PRO_E_FLEX_EXT_INT_CMP 5151
#define PRO_E_FLEX_SOL_INDEX 5152
/* FLXMDL Offset Geometry */
#define PRO_E_OGF_OFFSET_VAL 5147
#define PRO_E_OGF_DIR_OPT 5148
#define PRO_E_OGF_FLX_OPTS 5153
#define PRO_E_OGF_CLOSEGEOM 5154
#define PRO_E_OGF_ATT_OFFST 5155
#define PRO_E_OGF_CR_RND_GEOM 5156
#define PRO_E_OGF_KEEP_PATNSYM 5157
/* Edit Reference elements */
#define PRO_E_ER_REFERENCE_SETS 5158
#define PRO_E_ER_REFERENCE_SET 5159
#define PRO_E_ER_REFERENCE 5160
#define PRO_E_ER_UBF_ATTRS 5161
#define PRO_E_ER_UBF_ATTR 5162
#define PRO_E_UDF_VAR_DIM 5163
#define PRO_E_UDF_VAR_DIM_VIS 5164
/* Additional element for Sketched feature (formerly Sketched Curve) / Cosmetic Sketch */
#define PRO_E_SKFEAT_HATCH_ANGLE 5165
#define PRO_E_MFG_APPR_EXIT_DIR 5166
#define PRO_E_MIRROR_FULL_DEP_COPY 5167
#define PRO_E_SMT_PROJ_DIR 5168
#define PRO_E_UDF_EXT_PARAM_MODEL 5170
/* Mfg MfgPTMMatRem Feature elements */
#define PRO_E_MFGPTM_SEQ_REF 5171
#define PRO_E_MFGPTM_CONSTR_REF 5172
#define PRO_E_MFGPTM_RESOL_DBL 5173
/* CE component steps */
#define PRO_E_SMT_FLATTEN_PROJ_CUTS 5174
#define PRO_E_SMT_UNBEND_TYPE 5175
#define PRO_E_SMT_UNBEND_SUB_TYPE 5176
#define PRO_E_SMT_PRIMARY_FIXED_GEOM 5177
#define PRO_E_SMT_FIXED_REF 5178
#define PRO_E_SMT_FIXED_REF_SIDE 5179
#define PRO_E_SMT_UNBEND_REF_ARR 5180
#define PRO_E_SMT_UNBEND_REF 5181
#define PRO_E_SMT_UNBEND_SINGLE_REF 5182
#define PRO_E_SMT_DEFORM_SURFACES 5183
#define PRO_E_SMT_DISTINCT_AREAS_ARR 5184
#define PRO_E_SMT_ADD_FIXED_GEOM 5185
#define PRO_E_SMT_DEFORM_AREAS_ARR 5186
#define PRO_E_SMT_DEFORM_AREA 5187
#define PRO_E_SMT_DEFORM_GEOMS_ARR 5188
#define PRO_E_SMT_DEFORM_GEOM 5189
#define PRO_E_SMT_SINGLE_DEFORM_GEOM 5190
#define PRO_E_SMT_DEFORM_AREA_TYPE 5191
#define PRO_E_SMT_ADD_CORNER_RELIEFS 5192
#define PRO_E_SMT_FLATTEN_ALL_FORMS 5193
#define PRO_E_FLXSUBST_MNTN_PAT_FLAG 5194
#define PRO_E_FLXSUBST_KEEP_QUILT 5195
#define PRO_E_MGF_DATUMS 5196
/* Elements for CMM REFCSY S*/
#define PRO_E_CMM_REF_CSYS_TRF_OPT 5197
#define PRO_E_CMM_PARENT_CSYS_SEL 5198
#define PRO_E_CMM_STEP_PRIMARY_CSYS_COMP 5199
#define PRO_E_CMM_STEP_ALIGN_AXIS_OPTION 5200
#define PRO_E_CMM_STEP_PRIMARY_FEAT_SEL 5201
#define PRO_E_CMM_STEP_TRANS_CSYS_COMP 5202
#define PRO_E_CMM_STEP_TRANS_X_COMP 5203
#define PRO_E_CMM_STEP_TRANS_X_INPUT 5204
#define PRO_E_CMM_STEP_TRANS_X_FEAT_SEL 5205
#define PRO_E_CMM_STEP_TRANS_Y_COMP 5206
#define PRO_E_CMM_STEP_TRANS_Y_INPUT 5207
#define PRO_E_CMM_STEP_TRANS_Y_FEAT_SE 5208
#define PRO_E_CMM_STEP_TRANS_Z_COMP 5209
#define PRO_E_CMM_STEP_TRANS_Z_INPUT 5210
#define PRO_E_CMM_STEP_TRANS_Z_FEAT_SEL 5211
#define PRO_E_CMM_STEP_ROTATE_CSYS_COMP 5212
#define PRO_E_CMM_STEP_ROTATE_INPUT 5213
#define PRO_E_CMM_STEP_ROTATE_FEAT_SEL 5214
#define PRO_E_CMM_STEP_ROTATE_AXIS_OPT 5215
#define PRO_E_CMM_STEP_ROT_ALIGN_OPT 5216
#define PRO_E_CMM_STEP_CUSTOM_CSYS_COMP 5217
#define PRO_E_CMM_STEP_CUSTOM_FUNC_NAME 5218
#define PRO_E_CMM_STEP_CUSTOM_FUNCTION_A 5219
#define PRO_E_CMM_STEP_CUSTOM_FEAT_SEL 5220
#define PRO_E_CMM_REF_CSYS_ALIGN_REF_OPT 5221
#define PRO_E_CMM_STEP_THEO_CSYS_COMP 5222
#define PRO_E_CMM_THEO_DATUM_CSYS_SEL 5223
#define PRO_E_CMP_CMM_DRAGGER 5224
#define PRO_E_CMM_FLIP_OPT 5225
#define PRO_E_CMM_CUSTOM_DOF_COMP 5226
#define PRO_E_CMM_CUSTOM_DOF_X_DIR 5227
#define PRO_E_CMM_CUSTOM_DOF_Y_DIR 5228
#define PRO_E_CMM_CUSTOM_DOF_Z_DIR 5229
#define PRO_E_CMM_CUSTOM_DOF_X_ROT 5230
#define PRO_E_CMM_CUSTOM_DOF_Y_ROT 5231
#define PRO_E_CMM_CUSTOM_DOF_Z_ROT 5232
#define PRO_E_CMM_PNT_DATA_ARR 5233
#define PRO_E_CMM_PNT_DATA_COMPOUND 5234
#define PRO_E_CMM_SUBFEAT_ID 5235
#define PRO_E_CMM_PNT_TYPE 5236
#define PRO_E_CMM_PNT_REF 5237
#define PRO_E_CMM_PNT_RULE_IDX_U 5238
#define PRO_E_CMM_PNT_RULE_IDX_V 5239
#define PRO_E_CMM_CLEARANCE_COMP 5240
#define PRO_E_CMM_PNT_CLEAR_DIST 5241
#define PRO_E_CMM_PNT_PULLOUT_DIST 5242
/* import feature additional elements */
#define PRO_E_IMP_FEAT_LOCATION_METHOD_OPT 5243
#define PRO_E_SMT_AUTO_DEFORM_REF_ARR 5244
#define PRO_E_SMT_AUTO_DEFORM_REF 5245
#define PRO_E_SMT_AUTO_DEFORM_SINGLE_REF 5246
#define PRO_E_SMT_DISTINCT_AREA 5247
#define PRO_E_MFG_ENTRY_PNT_REF 5248
#define PRO_E_SMT_RIP_CONNECT_SETS 5249
#define PRO_E_SMT_RIP_CONNECT_SET 5250
#define PRO_E_SMT_RIP_CONN_REFS 5251
#define PRO_E_SMT_RIP_CONN_REF 5252
#define PRO_E_SMT_RIP_CONN_END 5253
#define PRO_E_SMT_BEND_BACK_SUB_TYPE 5254
#define PRO_E_SMT_BBACK_REF_ARR 5255
#define PRO_E_SMT_BBACK_REF 5256
#define PRO_E_SMT_BBACK_SINGLE_REF 5257
#define PRO_E_SMT_BBACK_FLAT_CONTOURS_AR 5258
#define PRO_E_SMT_GEOM_CONTOUR 5259
#define PRO_E_SMT_GEOM_CONTOUR_GEOM 5260
#define PRO_E_SMT_GEOM_CONTOUR_EDGE 5261
#define PRO_E_MFG_CUST_CYCLE_PLATE_NAME 5270
#define PRO_E_MFG_CUST_CYCLE_VAR_NAME 5271
#define PRO_E_MFG_HSET_DRILL_GROUP_REF 5272
#define PRO_E_MFG_HSET_DIAM_ARR 5273
#define PRO_E_MFG_HSET_DIAM_COMPOUND 5274
#define PRO_E_MFG_HSET_HOLE_DIAM 5275
#define PRO_E_MFG_HSET_PARAM_ARR 5276
#define PRO_E_MFG_HSET_PARAM_COMPOUND 5277
#define PRO_E_MFG_HSET_PARAM_NAME 5278
#define PRO_E_MFG_HSET_PARAM_DTYPE 5279
#define PRO_E_MFG_HSET_PARAM_VAL_DBL 5280
#define PRO_E_MFG_HSET_PARAM_VAL_INT 5281
#define PRO_E_MFG_HSET_PARAM_VAL_STR 5282
#define PRO_E_MFG_HSET_START_HOLE_REF 5283
#define PRO_E_MFG_THRM_HOLESET_ARR 5284
#define PRO_E_MFG_THRM_HOLESET_COMPOUND 5285
#define PRO_E_MFG_THRM_HSET_END_COMPOUND 5286
#define PRO_E_MFG_THRM_HSET_HOLES_COMP 5287
#define PRO_E_MFG_HSET_THREAD_DESCR_ARR 5288
#define PRO_E_MFG_HSET_THREAD_DESCR_COMP 5289
#define PRO_E_MFG_HSET_THREAD_DESCR 5290
#define PRO_E_MFG_HSET_PARAM_OPER_OPT 5291
#define PRO_E_MFG_HSET_PARAM_VAL_BOOL 5292
#define PRO_E_HOLESET_PLATE_END_OPT 5293
#define PRO_E_MFG_CUSTOM_CYCLE_NAME 5294
#define PRO_E_MFG_LOOP_SURF_REF 5295
#define PRO_E_FF_TRAJ_FLIP_OPT 5296
#define PRO_E_MFG_HSET_DIAM_TYPE_OPT 5297
#define PRO_E_MFG_HSET_PARAM_RULE_OPT 5298
#define PRO_E_OPERATION_NAME 5301
#define PRO_E_WCELL_NAME 5302
#define PRO_E_REF_SEQ_NAME 5303
#define PRO_E_FIXTURE_NAME 5304
#define PRO_E_MFG_OFFSET 5305
#define PRO_E_MFG_OFFSET_CUT 5307
#define PRO_E_MFG_MAT_TO_RMV 5308
#define PRO_E_SMT_CORNER_RELIEF_ROTATE 5309
#define PRO_E_SMT_CORNER_RELIEF_ROTATE_ADD 5310
#define PRO_E_SMT_CORNER_RELIEF_ROTATE_VAL 5311
#define PRO_E_SMT_CORNER_RELIEF_OFFSET 5312
#define PRO_E_SMT_CORNER_RELIEF_OFFSET_ADD 5313
#define PRO_E_SMT_CORNER_RELIEF_OFFSET_VAL 5314
#define PRO_E_MGF_REFS 5315
#define PRO_E_MGF_OPTS 5316
#define PRO_E_MODRND_OPTS 5317
#define PRO_E_MODRND_ATTACH 5318
#define PRO_E_MODRND_CLOSEGEOM 5319
#define PRO_E_MODRND_RMV_INTERF_RND 5320
#define PRO_E_MODRND_REMOVE 5321
#define PRO_E_SSRF_REF_SEL_TYPE 5322
#define PRO_E_SSRF_CR_SRF_TYPE 5323
#define PRO_E_CMM_GEOM_REF 5354
#define PRO_E_GEOM_REF_IDSURF_ARR 5355
#define PRO_E_GEOM_REF_IDSURF_COMP 5356
#define PRO_E_GEOM_REF_IDSURF 5357
#define PRO_E_CMM_START_SURF 5358
#define PRO_E_MFG_WCELL_CUST_CYCLE_ARR 5360
#define PRO_E_MFG_WCELL_CUST_CYCLE_COMP 5361
#define PRO_E_MFG_WCELL_CUST_CYCLE_NAME 5362
#define PRO_E_MFG_MILL_THREAD_TYPE_OPT 5363
#define PRO_E_MFG_NORM_SRFS 5364
#define PRO_E_MFG_MACH_CRVS 5365
#define PRO_E_CECOMP_CHOOSER 5366
#define PRO_E_BLEND_SEC_ARRAY 5367
#define PRO_E_BLEND_CMP 5368
#define PRO_E_BLEND_LOC_OPTION 5369
#define PRO_E_BLEND_OFFSET 5370
#define PRO_E_BLEND_OFFSET_INDX 5371
#define PRO_E_BLEND_SEC_LOC_REF 5372
#define PRO_E_BLEND_SKETSEL_OPT 5373
#define PRO_E_BLEND_OFFSET_OPTION 5374
#define PRO_E_BLEND_AXIS 5375
/* Elements for CMM CONSTRUCT */
#define PRO_E_CMM_CONSTRUCT_TYPE 5377
#define PRO_E_CMM_CONS_REF_FEAT 5378
/* Elements for CMM VERIFY */
#define PRO_E_CMM_VERIFY_ATTR 5379
#define PRO_E_CMM_VERIFY_TOL 5380
#define PRO_E_CMM_VERIFY_FEAT 5381
#define PRO_E_CMM_VERIFY_DATUM 5382
#define PRO_E_DRAFT_NEUTRAL_QUILT_1 5383
#define PRO_E_DRAFT_NEUTRAL_QUILT_2 5384
#define PRO_E_BLEND_SECTION 5385
#define PRO_E_CRV_TP_PNT_RAD_GROUP 5386
#define PRO_E_PAT_GPRF 5387
#define PRO_E_PAT_GPRF_TYPE 5388
#define PRO_E_PAT_GPRF_TRF_TYPE 5389
#define PRO_E_PAT_GPRF_DIR1_TRF 5390
#define PRO_E_PAT_GPRF_DIR1_NUM_INST 5391
#define PRO_E_PAT_GPRF_DIR1_SPACING 5392
#define PRO_E_PAT_GPRF_DIR2_TRF 5393
#define PRO_E_PAT_GPRF_DIR2_NUM_INST 5394
#define PRO_E_PAT_GPRF_DIR2_SPACING 5395
#define PRO_E_DIR_GPRF_MOVE_OPT 5396
#define PRO_E_PAT_GPRF_USE_SRF 5397
#define PRO_E_PAT_GPRF_SRF_REF 5398
#define PRO_E_PAT_GPRF_USE_SEC 5399
#define PRO_E_FLEXMOVE_DEFINE_METHOD 5400
#define PRO_E_MFG_NORM_GEOM 5401
#define PRO_E_PSR_PLN_REF 5402
#define PRO_E_STD_FLEX_PROPAGATION 5404
#define PRO_E_BLEND_SURF_OPTION 5405
#define PRO_E_SMT_EDGE_BEND_REFERENCES 5406
#define PRO_E_SMT_EDGE_RIP_REFERENCES 5407
#define PRO_E_MFG_PARAM_SITE_NAME 5408
#define PRO_E_BLEND_END_SECTIONS_OPEN 5409
#define PRO_E_BLEND_TANG_COND 5410
#define PRO_E_BLEND_END_TNC 5411
#define PRO_E_BLEND_TANG_OPTION 5412
#define PRO_E_BLEND_CONNECT_SURF_CHAIN 5413
/* SMT bend relief */
#define PRO_E_BEND_RELIEF_DEPTH_TYPE 5414
#define PRO_E_BEND_RELIEF_DEPTH_OLD 5415
#define PRO_E_SMT_CONVERSION_AUTO_BENDS 5416
#define PRO_E_SMT_CONVERSION_AUTO_BENDS_USE 5417
#define PRO_E_SMT_CONVERSION_AUTO_BENDS_TYPE 5418
#define PRO_E_D3ELEM_LOCATION 5419
#define PRO_E_MFG_WCELL_HEAD_1 5420
#define PRO_E_MFG_WCELL_HEAD_2 5421
#define PRO_E_MFG_WCELL_HEAD_TYPE 5422
#define PRO_E_MFG_WCELL_TOOL_SETUP_ARR 5423
#define PRO_E_MFG_WCELL_TOOL_SETUP 5424
#define PRO_E_MFG_WCELL_TOOL_POCKET_NUM 5425
#define PRO_E_MFG_WCELL_TOOL_ID 5426
#define PRO_E_MFG_WCELL_TOOL_OUTPUT_TIP 5427
#define PRO_E_MFG_TOOL_TIP_ARR 5428
#define PRO_E_MFG_TOOL_TIP_COMPOUND 5429
#define PRO_E_MFG_TOOL_TIP_REGISTER 5430
#define PRO_E_MFG_TOOL_TIP_COMMENT 5431
#define PRO_E_MFG_TOOL_TIP_OFFSET_Z 5432
#define PRO_E_MFG_TOOL_TIP_OFFSET_X 5433
#define PRO_E_MFG_TOOL_TIP_OFFSET_ANGLE 5434
#define PRO_E_MFG_TOOL_TIP_FLASH_OPT 5435
#define PRO_E_MFG_TOOL_TIP_FLSH_REGISTER 5436
#define PRO_E_MFG_TOOL_TIP_FLSH_COMMENT 5437
#define PRO_E_MFG_TOOL_TIP_FLSH_OFFSET_Z 5438
#define PRO_E_MFG_TOOL_TIP_FLSH_OFFSET_X 5439
#define PRO_E_MFG_WCELL_CMM_HEAD 5440
#define PRO_E_MFG_CMM_TOOL_SETUP_ARR 5441
#define PRO_E_MFG_CMM_TOOL_SETUP 5442
#define PRO_E_MFG_CMM_TOOL_POCKET_NUM 5443
#define PRO_E_MFG_CMM_TOOL_TOOL_ID 5444
#define PRO_E_MFG_CMM_TOOL_TIP_NUM 5445
#define PRO_E_MFG_CMM_TOOL_REGISTER 5446
#define PRO_E_MFG_CMM_TOOL_COMMENT 5447
#define PRO_E_MFG_CMM_TOOL_PITCH_ANGLE 5448
#define PRO_E_MFG_CMM_TOOL_ROLL_ANGLE 5449
#define PRO_E_FLEXMOVE_DIMS_COMPOUND 5450
#define PRO_E_FLEXMOVE_DIMS_ARRAY 5451
#define PRO_E_FLEXMOVE_DIM_COMPOUND 5452
#define PRO_E_FLEXMOVE_DIM_VALUE 5453
#define PRO_E_FLEXMOVE_DIM_TYPE 5454
#define PRO_E_FLEXMOVE_DIM_REFS 5455
#define PRO_E_NCD_CURVE_POINT 5457
#define PRO_E_NCD_CURVE_POINT_REF 5458
#define PRO_E_NCD_CURVE_POINT_OFFSET_TYPE 5459
#define PRO_E_NCD_CURVE_POINT_OFFSET 5460
#define PRO_E_TOOL_MTN_TRIM_START_VAL 5461
#define PRO_E_TOOL_MTN_TRIM_END_VAL 5462
#define PRO_E_TOOL_MTN_TRIM_VAL_OPT 5463
#define PRO_E_TOOL_MTN_TRIM_FLIP_DIR 5464
#define PRO_E_KEEP_REMOVED_SRFS_OPT 5465
#define PRO_E_PSR_DTM_REF 5466
#define PRO_E_PSR_RCG_OPT 5467
#define PRO_E_MFG_PREREQUISITE_ARR 5468
#define PRO_E_MFG_PREREQUISITE_COMPOUND 5469
#define PRO_E_MFG_PREREQUISITE_ID 5470
#define PRO_E_FLEXMOVE_MOVED_GEOMETRY 5471
#define PRO_E_FLEXMOVE_DTM_REF 5472
#define PRO_E_FLEX_CLOSE_GEOM 5473
#define PRO_E_FLEX_ATTACH_GEOM 5474
#define PRO_E_FLEX_CR_RND_GEOM 5475
#define PRO_E_FLEX_KEEP_ORIG_GEOM 5476
#define PRO_E_FLEX_SPLIT_EXT_SRFS 5477
#define PRO_E_FLEX_OPTS_CMPND 5478
#define PRO_E_CMP_SUBSTITUTED 5479
#define PRO_E_CMP_SUBTITUTING 5480
#define PRO_E_FLXSUBST_KEEP_SURFS 5481
#define PRO_E_CMM_SAVE_OPT 5482
#define PRO_E_CECOMP_TAGS_COLL 5483
#define PRO_E_MFG_OPER_STOCK_MATERIAL 5484
#define PRO_E_SEC_USE_COSM_SKETCH 5485
#define PRO_E_FLEX_SPLIT_EXT_SURFS_CMP 5486
#define PRO_E_FLEX_EXT_SRFS_CMP 5487
#define PRO_E_FLEX_SPT_SRFS_CMP 5488
#define PRO_E_FLEX_FLIP_SPLIT_DIR 5489
#define PRO_E_MFG_FIXTURE_REF 5491
#define PRO_E_REF_SSRF_SRF 5492
#define PRO_E_SSRF_INC_ELEMS 5493
#define PRO_E_SSRF_EXCL_ELEMS 5494
#define PRO_E_CECOMP_REF_MODEL 5495
#define PRO_E_TOOL_MOTION_APPR_ALONG_TOOL_AXIS 5496
#define PRO_E_TOOL_MOTION_EXIT_ALONG_TOOL_AXIS 5497
#define PRO_E_TOOL_MTN_CL_CMD_GEOM_REF 5498
#define PRO_E_TOOL_MTN_CL_CMD_SRF_OPT 5499
#define PRO_E_TOOL_MTN_CL_CMD_ON_EXIST_PNT 5500
#define PRO_E_MFG_FEAT_VIEW_NAME 5501
#define PRO_E_MFG_SIMP_REP_NAME 5502
#define PRO_E_MFG_PROCESS_REF 5503
#define PRO_E_MFG_TIME_ESTIMATE 5504
#define PRO_E_MFG_TIME_ACTUAL 5505
#define PRO_E_MFG_COST_ESTIMATE 5506
#define PRO_E_SLDBEND_QUILT 5507
#define PRO_E_SLDBEND_CRVPNTS 5508
#define PRO_E_SLDBEND_TYPE_OPT 5509
#define PRO_E_SLDBEND_CHAIN_ARRAY 5510
#define PRO_E_MFG_WCELL_ASSEM_COMPOUND 5511
#define PRO_E_MFG_WCELL_ASSEMBLY_NAME 5512
#define PRO_E_MFG_WCELL_LOCAL_CSYS_REF 5513
#define PRO_E_SMT_ADD_CORNER_RELIEFS_OPTS 5514
#define PRO_E_SMT_ADD_CORNER_RELIEFS_TYPE 5515
#define PRO_E_FLEX_BOUND_EDGES_CMP 5516
#define PRO_E_MFG_SURF_SIDE_COMPOUND 5517
#define PRO_E_MFG_SURF_SIDE_TOLERANCE 5518
#define PRO_E_MFG_SURF_SIDE_FLIP_QUILTS 5519
#define PRO_E_OPT_SUBST_SRF_NORM_SIDE 5520
#define PRO_E_MFG_HOLEMAKING_CYCLE_TYPE 5521
#define PRO_E_SMT_RIP_CONNECT_COMP 5522
#define PRO_E_SMT_RIP_CONN_GAP_COMP_BEG 5523
#define PRO_E_SMT_RIP_CONN_GAP_COMP 5524
#define PRO_E_SMT_RIP_CONN_ADD_GAP 5525
#define PRO_E_SMT_RIP_CONN_GAP_VAL 5526
#define PRO_E_PAT_GPRF_GEOM_REFS 5527
#define PRO_E_SWEEP_TYPE 5528
/* Acceptance Criteria feature */
#define PRO_E_AC_CONSTRAINTS 5529
/* Remove surface feature */
#define PRO_E_RM_SURF_LEAVE_OPEN_OPT 5530
#define PRO_E_TOOL_MTN_INH_CLEAR_DIST 5531
#define PRO_E_MFG_DRV_SRF_DIR 5532
/* Sheet metal unbend feature */
#define PRO_E_SMT_MERGE_SAME_SIDES 5533
#define PRO_E_PAT_GPRF_DTM_REFS 5534
#define PRO_E_FLEX_SPLIT_SURFS 5535
#define PRO_E_FLEX_MAINTAIN_TOPO 5536
#define PRO_E_HOLESET_START_Z_OFFSET 5541
#define PRO_E_HOLESET_END_Z_OFFSET 5542
#define PRO_E_HOLESET_CUSTOM_CYCLE_REF_DEPTH 5543
#define PRO_E_HOLESET_AUTODRILL_REF_INDEX 5544
#define PRO_E_HOLESET_PLATE_START_Z_OFFSET 5545
#define PRO_E_HOLESET_PLATE_END_Z_OFFSET 5546
/* Sheet metal sketch form feature */
#define PRO_E_SKETCH_FORM_EXCL_SRF_ARR 5547
#define PRO_E_SKETCH_FORM_EXCL_SRF_CMP 5548
#define PRO_E_SKETCH_FORM_EXCL_SRF 5549
#define PRO_E_SKETCH_FORM_TYPE 5550
#define PRO_E_SKETCH_FORM_DEPTH_PUNCH 5551
#define PRO_E_SKETCH_FORM_DIR 5552
/* Xsec feature */
#define PRO_E_XSEC_DTM_CSYS_BEGIN 5553
#define PRO_E_XSEC_DTM_CSYS_END 5554
#define PRO_E_XSEC_DTM_FIELD_BEGIN 5555
#define PRO_E_XSEC_DTM_FIELD_END 5556
#define PRO_E_XSEC_DTM_PNT_BEGIN 5557
#define PRO_E_XSEC_DTM_PNT_END 5558
#define PRO_E_XSEC_DTM_AXIS_BEGIN 5559
#define PRO_E_XSEC_DTM_AXIS_END 5560
#define PRO_E_XSEC_DTM_PLN_BEGIN 5561
#define PRO_E_XSEC_DTM_PLN_END 5562
#define PRO_E_XSEC_FLIP 5563
#define PRO_E_XSEC_PLANE 5564
#define PRO_E_XSEC_SRF_COLOR 5565
/* Wall Intersect feat */
#define PRO_E_SMT_WALL_JOIN_FLIP 5566
#define PRO_E_CUTLINE_AUTO_OUTER_OPT 5567
#define PRO_E_CUTLINE_INNER_POINT 5568
#define PRO_E_SMT_WALL_JOIN_REFS_CMPND 5569
#define PRO_E_SMT_WALL_JOIN_REFS 5570
#define PRO_E_SMT_WALL_JOIN_REFS_SRF 5571
#define PRO_E_SMT_BEND_RELIEF_CMPND 5572
#define PRO_E_XSEC_FEAT_TYPE 5573
#define PRO_E_SMT_WALL_JOIN_TRIM 5574
#define PRO_E_MFG_HELICAL_CUT_OPT 5575
#define PRO_E_XSEC_LOCK 5576
#define PRO_E_CUTLINE_INNER_FIRST_OPT 5577
#define PRO_E_COLLAPSE_FEAT_GEOMETRY_OPTS 5578
#define PRO_E_COLLAPSE_FEAT_ATTACH_OPT 5579
#define PRO_E_SKETCH_FORM_DEPTH_PIERCING 5580
#define PRO_E_XSEC_MODEL_REFS_OPT 5581
#define PRO_E_XSEC_MODEL_REFS_ARR 5582
#define PRO_E_XSEC_QUILT_REFS_OPT 5583
#define PRO_E_XSEC_QUILT_REF_SEL 5584
#define PRO_E_SMT_FLAT_PAT_BBOX_DIMS 5585
#define PRO_E_MFG_TM_TOOL_AXIS_COMPOUND 5586
#define PRO_E_MFG_TM_TOOL_AXIS_OPT 5587
#define PRO_E_MFG_TM_TOOL_AXIS_REF 5588
#define PRO_E_MFG_TM_TOOL_AXIS_FLIP_OPT 5589
#define PRO_E_COLLAPSE_FEAT_CPY_GEOMETRY_OPT 5590
#define PRO_E_COLLAPSE_FEAT_MERGE_GMTRY_OPT 5591
#define PRO_E_XSEC_SKETCH_SIDE1 5592
#define PRO_E_XSEC_SKETCH_SIDE2 5593
#define PRO_E_COMP_PLACEMENT_OFFSET 5594
#define PRO_E_ECAD_AREA_TRIM_BNDRS 5595
#define PRO_E_XSEC_INTERFERENCE_COLOR 5596
#define PRO_E_FLXSLV_CONSTRS 5597
#define PRO_E_FLXSLV_CONSTR 5598
#define PRO_E_FLXSLV_CONSTR_REFS 5599
#define PRO_E_FLXSLV_CONSTR_TYPE 5600
#define PRO_E_FLXSLV_CONSTR_COND 5601
#define PRO_E_FLXSLV_CONSTR_SYMREF 5602
#define PRO_E_FLXSLV_CONSTR_DIM1 5603
#define PRO_E_FLXSLV_CONSTR_DIM2 5604
#define PRO_E_FLXSLV_ATTACH_LIST_REF 5605
#define PRO_E_HOLESET_GANG_TOOL_INFO 5606
#define PRO_E_HSET_GANG_TOOL_PARENT_ID 5607
#define PRO_E_HSET_IS_GANG_TOOL_LEADER 5608
#define PRO_E_MFG_MILL_THREAD_TAPER_OPT 5609
#define PRO_E_MFG_CUT_START_PNT_REF 5610
#define PRO_E_MFG_FIXTURE_TYPE 5611
#define PRO_E_FLEX_PROPAGATE_TANGENCY 5612
#define PRO_E_FLEX_DFLT_CONDITIONS 5613
#define PRO_E_MFG_AXIS_DEF_COMP 5614
#define PRO_E_MFG_AXIS_DEF_TYPE 5615
#define PRO_E_MFG_AXIS_DEF_PIVOT_REF 5616
#define PRO_E_MFG_AXIS_DEF_LOCATION_ARR 5617
#define PRO_E_MFG_AXIS_DEF_LOCATION 5618
#define PRO_E_MFG_AXIS_DEF_ORIGIN_REF 5619
#define PRO_E_MFG_AXIS_DEF_ORIENT_COMP 5620
#define PRO_E_MFG_AXIS_DEF_ORIENT_TYPE 5621
#define PRO_E_MFG_AXIS_DEF_ORIENT_REF 5622
#define PRO_E_MFG_AXES_DEF_ANGLE_X 5623
#define PRO_E_MFG_AXES_DEF_ANGLE_Y 5624
#define PRO_E_MFG_AXIS_DEF_LOC_FLIP_OPT 5625
#define PRO_E_MFG_AXIS_DEF_CURVE_COMP 5626
#define PRO_E_MFG_AXIS_DEF_SYNC_ARR 5627
#define PRO_E_MFG_AXIS_DEF_SYNC_COMP 5628
#define PRO_E_MFG_AXIS_DEF_SYNC_PNT_1 5629
#define PRO_E_MFG_AXIS_DEF_SYNC_PNT_2 5630
#define PRO_E_MFG_AXIS_DEF_FLIP_OPT 5631
#define PRO_E_MFG_AXIS_DEF_NORM_SRF_COMP 5632
#define PRO_E_ECAD_AREA_COLOR 5633
#define PRO_E_SMT_WALL_JOIN_EXTEND 5634
#define PRO_E_MFG_ROUGHING_TYPE 5635
#define PRO_E_REORDER_SRC_FEAT_REFS 5636
#define PRO_E_REORDER_SRC_FEAT_REF_CMP 5637
#define PRO_E_REORDER_SRC_FEAT_REF 5638
#define PRO_E_REORDER_INSERT_OPT 5639
#define PRO_E_REORDER_TRG_FEAT_REF 5640
#define PRO_E_SPBND_DEPTH 5641
#define PRO_E_SPBND_UPTO_REF 5642
#define PRO_E_SPBND_DEPTH_OPT 5643
#define PRO_E_SPBND_SLD_OPT 5644
#define PRO_E_SPBND_QUILT 5645
#define PRO_E_SPBND_XSEC_OPT 5646
#define PRO_E_SPBND_CTRL_TYPE 5647
#define PRO_E_SPBND_GRAPH_REF 5648
#define PRO_E_MFG_TRAJ_FROM_TO_CRV 5649
#define PRO_E_PAT_GEOM_REFS 5650
#define PRO_E_PAT_CRV_DTM_REFS 5651
#define PRO_E_SKIRT_REF_MODEL 5652
#define PRO_E_SKIRT_PULL_DIR_COMPOUND 5653
#define PRO_E_SKIRT_BOUNDARY_REF 5654
#define PRO_E_SKIRT_DRAFT_ANGLE 5656
#define PRO_E_SKIRT_SHUTOFF_EXT_COMPOUND 5657
#define PRO_E_SKIRT_SHUTOFF_EXT_TYPE 5658
#define PRO_E_SKIRT_SHUTOFF_EXT_DIST 5659
#define PRO_E_SKIRT_SHUTOFF_CURVE_COMP 5660
#define PRO_E_SKIRT_SHUTOFF_PLANE_REF 5661
#define PRO_E_SKIRT_FILL_SET_ARR 5662
#define PRO_E_SKIRT_FILL_SET_COMPOUND 5663
#define PRO_E_SKIRT_FILL_CURVES_COMPOUND 5664
#define PRO_E_SKIRT_FILL_TYPE 5665
#define PRO_E_SKIRT_FILL_PLANE 5666
#define PRO_E_SKIRT_FILL_SURF_COMPOUND 5667
#define PRO_E_SKIRT_FILL_LOOP_OFFSET 5668
#define PRO_E_SKIRT_EXT_SET_ARR 5669
#define PRO_E_SKIRT_EXT_SET_COMPOUND 5670
#define PRO_E_SKIRT_EXT_SET_REF_IDX 5671
#define PRO_E_SKIRT_EXT_SET_TYPE 5672
#define PRO_E_SKIRT_EXT_SET_CURVE_COMP 5673
#define PRO_E_SKIRT_EXT_SET_DIR_COMPOUND 5674
#define PRO_E_SPBND_APPENDIX 5675
#define PRO_E_SPBND_CSYS_CMP 5676
#define PRO_E_CBL_LOC_OVERLAP_VAL 5677
#define PRO_E_MFG_MILL_WIND_APPR_WALLS 5678
#define PRO_E_MFG_ROUGHING_REF_TYPE 5679
#define PRO_E_MFG_MILL_VOL_COMPOUND 5680
#define PRO_E_MFG_MILL_VOL_REF 5681
#define PRO_E_MFG_MILL_VOL_TOP_SURF_REF 5682
#define PRO_E_MFG_MILL_VOL_APPR_WALLS 5683
#define PRO_E_MFG_MILL_VOL_EXCL_SRF_COMP 5684
#define PRO_E_SPBND_RELATIONS 5685
#define PRO_E_SPBND_SECTION 5686
#define PRO_E_MODRND_DIMENSIONAL_SCHEMA 5687
#define PRO_E_MODRND_DIM2_VAL 5688
#define PRO_E_MODRND_DIM_REF_SURFACE 5689
#define PRO_E_FLEX_PROP_ALL_TANGENCY 5690
#define PRO_E_FORM_DIE_POCKET_GEOM_CMP 5691
#define PRO_E_MFG_SYNCH_ARR 5692
#define PRO_E_MFG_SYNCH_COMP 5693
#define PRO_E_MFG_SYNCH_SFT_ID 5694
#define PRO_E_MFG_SYNCH_DRV_HEAD_NO 5695
#define PRO_E_MFG_SYNCH_HEAD_ARR 5696
#define PRO_E_MFG_SYNCH_HEAD_SEQ_COMP 5697
#define PRO_E_MFG_SYNCH_HEAD_NO 5698
#define PRO_E_MFG_SYNCH_SEQ_ARR 5699
#define PRO_E_MFG_SYNCH_SEQ_COMP 5700
#define PRO_E_MFG_SYNCH_SEQ 5701
#define PRO_E_MFG_SYNCH_PNT_ARR 5702
#define PRO_E_MFG_SYNCH_PNT_COMP 5703
#define PRO_E_MFG_SYNCH_PNT_SFT_ID 5704
#define PRO_E_MFG_AXES_DEF_ANGLE_Z 5705
#define PRO_E_HOLESET_SEL_INDIV_GEOMETRY 5706
#define PRO_E_HOLESET_SEL_UNSEL_GEOMETRY 5707
#define PRO_E_SPBND_CSYS_SECTION 5708
#define PRO_E_MFG_SUB_SPINDLE_OPT 5709
#define PRO_E_SUBSP_RETR_SURF 5710
#define PRO_E_SUBSP_RETR_SURF_TYPE 5711
#define PRO_E_SUBSP_RETR_SURF_REF 5712
#define PRO_E_SUBSP_RETR_SURF_ORIENT 5713
#define PRO_E_SUBSP_RETR_SURF_VALUE 5714
#define PRO_E_MFG_SYNCH_PNT_LOC_TYPE 5715
#define PRO_E_MFG_SYNCH_PNT_PARAM 5716
#define PRO_E_MFG_SYNCH_MATCH_PNT_ARR 5717
#define PRO_E_MFG_SYNCH_MATCH_PNT_COMP 5718
#define PRO_E_MFG_SYNCH_MATCH_PNT_SFT_ID 5719
#define PRO_E_MFG_SYNCH_MATCH_SEQ 5720
#define PRO_E_MFG_SYNCH_MATCH_HEAD_NO 5721
#define PRO_E_REORDER_INC_DEP_OPT 5722
#define PRO_E_PAT_ATTACHMENT_OPTS 5723
#define PRO_E_PAT_ATTACH_OPT 5724
#define PRO_E_PAT_ROUND_OPT 5725
#define PRO_E_FLXSLV_PROP_CONSTRS 5726
#define PRO_E_MFG_AXIS_DEF_NORM_SRF 5727
#define PRO_E_SKIRT_FILL_SET_REF_IDX 5728
#define PRO_E_SPBND_UNBENT_OPT 5729
#define PRO_E_FLXSLV_ATT_GEOM_TYPE 5730
#define PRO_E_PAT_MAINTAIN_TOP_OPT 5731
#define PRO_E_SKIRT_EXT_SET_NEXT_DIR_OPT 5732
#define PRO_E_FLATQLT_SYM_PLANE 5733
#define PRO_E_FLATQLT_PLACE_OPT 5734
#define PRO_E_MFG_TRAJ_CORNER_COND 5735
#define PRO_E_MFG_TRAJ_CORNER_DFLT_TYPE 5736
#define PRO_E_MFG_TRAJ_CORNER_ARR 5737
#define PRO_E_MFG_TRAJ_CORNER 5738
#define PRO_E_MFG_TRAJ_CORNER_TYPE 5739
#define PRO_E_MFG_TRAJ_CORNER_PREV_ID 5740
#define PRO_E_MFG_TRAJ_CORNER_NEXT_ID 5741
#define PRO_E_MFG_TRAJ_CORNER_VAL 5742
#define PRO_E_FLEX_PULL_OPTION 5743
#define PRO_E_MODRND_CONIC_OPT 5744
#define PRO_E_MODRND_CONIC_VAL 5745
#define PRO_E_SKIRT_CREATE_TRANS_OPT 5746
#define PRO_E_MFG_WIN_VOL_REF_COMPOUND 5748
#define PRO_E_MFG_WIN_VOL_REF 5749
#define PRO_E_MFG_WIN_VOL_EXCL_SURF_COMP 5750
#define PRO_E_MFG_APPR_WALLS_SURF_COMP 5751
#define PRO_E_MFG_APPR_WALLS_CHAIN_COMP 5752
#define PRO_E_MFG_AXIS_DEF_SYNC_FLIP_OPT 5753
#define PRO_E_MFG_AXDEF_NORM_SURF_DIR 5755
#define PRO_E_PIPE_TO_POINTS 5756
#define PRO_E_PIPE_TO_POINT 5757
#define PRO_E_MFG_AXIS_DEF_SYNC_PARAM_1_OPT 5758
#define PRO_E_MFG_AXIS_DEF_SYNC_PARAM_2_OPT 5759
#define PRO_E_MFG_AXIS_DEF_LOC_ALIGN_Z 5760
#define PRO_E_ER_UBF_ADJUSTMENTS 5761
#define PRO_E_ER_UBF_ADJUSTMENT 5762
#define PRO_E_CMP_RNDCHMREC_REM 5763
#define PRO_E_RNDCHREC_RND 5764
#define PRO_E_RNDCHREC_ANG_NUM 5765
#define PRO_E_RNDCHREC_LIN_DIM 5766
#define PRO_E_RNDCHREC_RHO_NUM 5767
#define PRO_E_VOL_MILL_REGION_ARR 5768
#define PRO_E_VOL_MILL_REGION 5769
#define PRO_E_VOL_MILL_REGION_IDX 5770
#define PRO_E_VOL_MILL_REGION_SKIP_OPT 5771
#define PRO_E_MFG_WCELL_HEAD_3 5772
#define PRO_E_MFG_WCELL_HEAD_4 5773
#define PRO_E_MFG_FROM3_PNT 5774
#define PRO_E_MFG_HOME3_PNT 5775
#define PRO_E_MFG_FROM4_PNT 5776
#define PRO_E_MFG_HOME4_PNT 5777
#define PRO_E_SPBND_LOCK_LENGTH_OPT 5778
#define PRO_E_VOL_MILL_AP_EX_ARR 5779
#define PRO_E_VOL_MILL_AP_EX_TYPE 5780
#define PRO_E_VOL_MILL_AP_EX 5781
#define PRO_E_VOL_MILL_AP_EX_REGION_IDX 5782
#define PRO_E_VOL_MILL_AP_EX_REF 5783
#define PRO_E_VOL_MILL_AP_REF 5784
#define PRO_E_VOL_MILL_EX_REF 5785
#define PRO_E_AXIS_DEF_DRV_SRF_COMP 5786
#define PRO_E_RNDCHREC_RND_REC_SRF_CMP 5787
#define PRO_E_RNDCHREC_RND_REM_SRF_CMP 5788
#define PRO_E_RNDCHREC_CHM_REC_SRF_CMP 5789
#define PRO_E_RNDCHREC_CHM_REM_SRF_CMP 5790
#define PRO_E_CUTLINE_AUTO_OUTER_FLIP 5791
#define PRO_E_SMT_FLATTEN_FORM_WALLS 5792
#define PRO_E_FLEX_TRF_SEL_ATT_GEOM 5793
#define PRO_E_TRAV_SURF 5794
#define PRO_E_TRAV_SURF_REF 5795
#define PRO_E_TRAV_SURF_VALUE 5796
#define PRO_E_SWPBLN_ADJUST_TANGENCY 5797
#define PRO_E_RM_SURF_LIMIT_SOLN_OPT 5798
#define PRO_E_GMRG_COPY_QUILTS 5799
#define PRO_E_RM_SURF_MAINTAIN_TOPO 5800
#define PRO_E_SURFS_REF_SEQ 5801
#define PRO_E_SURFS_REF_SEQ_NAME 5802
#define PRO_E_TURN_STK_ALLW_PROF_ARR 5810
#define PRO_E_TURN_STK_ALLW_ROUGH_ARR 5811
#define PRO_E_TURN_STK_ALLOWANCE 5812
#define PRO_E_TURN_STK_ALLW_FIRST_ENT_ID 5813
#define PRO_E_TURN_STK_ALLW_LAST_ENT_ID 5814
#define PRO_E_TURN_STK_ALLOWANCE_VAL 5815
#define PRO_E_DRLGRP_HOLES 5816
#define PRO_E_BBL_VARI_RECALC 5817
#define PRO_E_BBL_HDS_CONTROL 5818
#define PRO_E_ECAD_AREA_USER_DEF_TYPE 5819
#define PRO_E_STD_PIPE_LINE_ENV 5820
#define PRO_E_STD_PIPE_LINE_ID 5821
#define PRO_E_STD_PIPE_LINE_LNSTK 5822
#define PRO_E_STD_PIPE_LINE_CORNER_TYPE 5823
#define PRO_E_STD_PIPE_LINE_BEND_RAD 5824
#define PRO_E_STD_PIPE_LINE_MITER_NUM 5825
#define PRO_E_STD_PIPE_LINE_MITER_LEN 5826
#define PRO_E_MFG_END_HEIGHT 5827
#define PRO_E_MFG_CONVENTIONAL_CUT_COMP 5840
#define PRO_E_MFG_CONV_CUT_DIR_OPT 5841
#define PRO_E_MFG_CONV_CUT_DIR_REF_COMP 5842
#define PRO_E_MFG_CONV_CUT_DIR_REF 5843
#define PRO_E_MFG_CONV_CUT_DIR_FLIP_OPT 5844
/* Thin ExtRev Feats */
#define PRO_E_FEAT_THIN 5845
#define PRO_E_FEAT_THIN_STRT 5846
#define PRO_E_FEAT_THIN_STRT_OPT 5847
#define PRO_E_FEAT_THIN_STRT_REF 5848
#define PRO_E_FEAT_THIN_END 5849
#define PRO_E_FEAT_THIN_END_OPT 5850
#define PRO_E_FEAT_THIN_END_REF 5851
#define PRO_E_SMT_TWIST_ATT_EDGE 5860
#define PRO_E_SMT_TWIST_TYPE 5861
#define PRO_E_SMT_TWIST_TRIM_EDGES 5862
#define PRO_E_SMT_TWIST_SIDE_1_OFFSET 5863
#define PRO_E_SMT_TWIST_OFFSET_TYPE 5864
#define PRO_E_SMT_TWIST_OFFSET_VAL 5865
#define PRO_E_SMT_TWIST_SIDE_2_OFFSET 5866
#define PRO_E_SMT_TWIST_AXIS_POINT 5867
#define PRO_E_SMT_TWIST_START_WIDTH_VAL 5868
#define PRO_E_SMT_TWIST_ATT_POINT_REF 5869
#define PRO_E_SMT_TWIST_ANGLE_VAL 5870
#define PRO_E_SMT_TWIST_WALL_LENGTH_VAL 5871
#define PRO_E_SMT_TWIST_END_WIDTH 5872
#define PRO_E_SMT_TWIST_END_WIDTH_TYPE 5873
#define PRO_E_SMT_TWIST_END_WIDTH_VAL 5874
#define PRO_E_SMT_TWIST_DEV_LEN_VAL 5875
#define PRO_E_SMT_TWIST_POINT_TYPE 5876
/* Pro/MECHANISM motor elements */
#define PRO_E_MOTOR_MOTION_TYPE 5877
#define PRO_E_MOTOR_DRIVEN_ENT_REF 5878
#define PRO_E_MOTOR_GEOM_REF_DATA 5879
#define PRO_E_MOTOR_REF_ENT 5880
#define PRO_E_MOTOR_FLIP_DIR 5881
#define PRO_E_MOTOR_PROFILE 5882
#define PRO_E_MOTOR_DRIVEN_QUANTITY 5883
#define PRO_E_MOTOR_INIT_STATE_DATA 5884
#define PRO_E_MOTOR_USE_CURR_POS 5885
#define PRO_E_MOTOR_INIT_POS 5886
#define PRO_E_MOTOR_INIT_VEL 5887
#define PRO_E_MOTOR_FUNC_TYPE 5888
#define PRO_E_MOTOR_PRIM_VAR 5889
#define PRO_E_MOTOR_FUNC_COEFF_A 5890
#define PRO_E_MOTOR_FUNC_COEFF_B 5891
#define PRO_E_MOTOR_FUNC_COEFF_C 5892
#define PRO_E_MOTOR_FUNC_COEFF_D 5893
#define PRO_E_MOTOR_FUNC_COEFF_L 5894
#define PRO_E_MOTOR_FUNC_COEFF_H 5895
#define PRO_E_MOTOR_FUNC_COEFF_T 5896
#define PRO_E_MOTOR_TABLE_DATA 5897
#define PRO_E_MOTOR_TBL_INTERPOL_TYPE 5898
#define PRO_E_MOTOR_TBL_ROWS 5899
#define PRO_E_MOTOR_TBL_ROW 5900
#define PRO_E_MOTOR_TBL_VAR_VAL 5901
#define PRO_E_MOTOR_TBL_FUNC_VAL 5902
#define PRO_E_MOTOR_TBL_DERIV_GIVEN 5903
#define PRO_E_MOTOR_TBL_DERIV_VAL 5904
#define PRO_E_MOTOR_TBL_FILE_DATA 5905
#define PRO_E_MOTOR_TBL_DEPEND_ON_FILE 5906
#define PRO_E_MOTOR_TBL_FILE_NAME 5907
#define PRO_E_MOTOR_UD_PROFILE_DATA 5908
#define PRO_E_MOTOR_UD_EXPR_ARR 5909
#define PRO_E_MOTOR_UD_EXPR_DATA 5910
#define PRO_E_MOTOR_UD_EXPR 5911
#define PRO_E_MOTOR_UD_DOM_TYPE 5912
#define PRO_E_MOTOR_UD_DOM_LOWER_BOUND 5913
#define PRO_E_MOTOR_UD_DOM_UPPER_BOUND 5914
#define PRO_E_MOTOR_CUST_LOAD_NAME 5915
#define PRO_E_SMT_BND_RLF_RCG 5916
#define PRO_E_SMT_PIO_SCOPE 5917
#define PRO_E_MOLD_CUTOUT_WP_COMP 5920
#define PRO_E_MOLD_CUTOUT_WP_REF 5921
#define PRO_E_MOLD_CUTOUT_REFPART_COMP 5922
#define PRO_E_MOLD_CUTOUT_ALL_PARTS_OPT 5923
#define PRO_E_MOLD_CUTOUT_REFPART_REF 5924
#define PRO_E_MOLD_CUTOUT_ALL_WP_OPT 5925
#define PRO_E_MOLD_SPLIT_VOL_REF 5930
#define PRO_E_MOLD_SPLIT_SURF_REF 5931
#define PRO_E_MOLD_SPLIT_GEOM_OPT 5932
#define PRO_E_MOLD_SPLIT_VOLUME_ARR 5933
#define PRO_E_MOLD_SPLIT_VOLUME_COMP 5934
#define PRO_E_MOLD_SPLIT_VOLUME_KEY 5935
#define PRO_E_MOLD_SPLIT_VOLUME_NAME 5936
#define PRO_E_PRTSPLIT_MODEL_SURF_COMP 5940
#define PRO_E_PRTSPLIT_SURF_FLIP_OPT 5941
#define PRO_E_PRTSPLIT_PULLDIR_COMP 5942
#define PRO_E_PRTSPLIT_VERT_FACE_OPT 5943
#define PRO_E_PRTSPLIT_CORE_SURF_COMP 5944
#define PRO_E_PRTSPLIT_CAVITY_SURF_COMP 5945
#define PRO_E_PRTSPLIT_UNDERCUT_SURF_COMP 5946
/*ECAD Cuts feat*/
#define PRO_E_ECAD_CUTS_FT_TYPE 5947
#define PRO_E_ECAD_CUTS_OBJ_ARRAY 5948
#define PRO_E_ECAD_CUT_OBJ 5949
#define PRO_E_TOOL_RS_GEN_GAP_SEG_SEL 5950
#define PRO_E_TOOL_RS_GEN_GAP_DIM 5951
#define PRO_E_MOLD_SILH_SRF 5952
#define PRO_E_MOLD_SILH_DIR 5953
#define PRO_E_MOLD_SILH_SLIDES 5954
#define PRO_E_MOLD_SILH_SLIDE_PARTS 5955
#define PRO_E_MOLD_SILH_SLIDE_PART 5956
#define PRO_E_MOLD_SILH_SLIDE_PART_REF 5957
#define PRO_E_MOLD_SILH_SLIDE_VOLS 5958
#define PRO_E_MOLD_SILH_SLIDE_VOL 5959
#define PRO_E_MOLD_SILH_SLIDE_VOL_REF 5960
#define PRO_E_MOLD_SILH_GAP_CLOSURE 5961
#define PRO_E_MOLD_SILH_GAP_CLOSURE_GTYPE 5962
#define PRO_E_MOLD_SILH_GAP_CLOSURE_ITEMS 5963
#define PRO_E_MOLD_SILH_GAP_CLOSURE_ITEM 5964
#define PRO_E_MOLD_SILH_GAP_CLOSURE_REF 5965
#define PRO_E_MOLD_SILH_GAP_CLOSURE_TYPE 5966
#define PRO_E_MOLD_SILH_GAP_CLOSURE_IDX 5967
#define PRO_E_MOLD_SILH_LOOPS 5968
#define PRO_E_MOLD_SILH_LOOP_GTYPE 5969
#define PRO_E_MOLD_SILH_CHAIN_GTYPE 5970
#define PRO_E_MOLD_SILH_LOOP_SELECTIONS 5971
#define PRO_E_MOLD_SILH_LOOP_SELECTION 5972
#define PRO_E_MOLD_SILH_LOOP_SEL 5973
#define PRO_E_MOLD_SILH_LOOP_TYPE 5974
#define PRO_E_MOLD_SILH_LOOP_ID2 5975
#define PRO_E_MOLD_SILH_LOOP_ID2_2 5976
#define PRO_E_MOLD_SILH_CHAIN_SELECTIONS 5977
#define PRO_E_MOLD_SILH_CHAIN_SELECTION 5978
#define PRO_E_MOLD_SILH_CHAIN_SEL 5979
#define PRO_E_MOLD_SILH_CHAIN_TYPE 5980
#define PRO_E_MOLD_SILH_CHAIN_ID2 5981
#define PRO_E_MOLD_SILH_CHAIN_ID2_2 5982
#define PRO_E_MOLD_SILH_IS_CHAIN 5983
#define PRO_E_PAT_MFG_SUB_OUTPUT 5984
#define PRO_E_PAT_MFG_SUB_OUT_MODE 5985
#define PRO_E_PAT_MFG_SUB_OUT_MULTAX 5986
#define PRO_E_WELD_DISP_SEQ_ID 5987
#define PRO_E_SMT_CRN_RLF_RCG 5988
#define PRO_E_SMT_BEND_RCG 5989
#define PRO_E_SMT_CRN_SEAM_RCG 5990
#define PRO_E_SMT_FORM_RCG 5991
#define PRO_E_SMT_BND_RLF_UNRCG 5992
#define PRO_E_SMT_CRN_RLF_UNRCG 5993
#define PRO_E_SMT_BEND_UNRCG 5994
#define PRO_E_SMT_CRN_SEAM_UNRCG 5995
#define PRO_E_SMT_FORM_UNRCG 5996
#define PRO_E_SMT_RECOGNITION_SEL_TYPE 5997
#define PRO_E_SMT_EDGE_RIP_CLOSE_CORNER 5998
#define PRO_E_PRTSPLIT_SPLIT_SURF_OPT 6001
#define PRO_E_PRTSPLIT_CAVITY_COMP 6002
#define PRO_E_PRTSPLIT_CORE_COMP 6003
#define PRO_E_PRTSPLIT_SLIDER_QLT_ARR 6004
#define PRO_E_PRTSPLIT_QUILT_COMP 6005
#define PRO_E_PRTSPLIT_QUILT_KEY 6006
#define PRO_E_PRTSPLIT_QUILT_TYPE 6007
#define PRO_E_PRTSPLIT_QUILT_NAME 6008
#define PRO_E_DRAFT_KEEP_ORIG 6009
#define PRO_E_SHAPEVOL_VOLUME_REF 6010
#define PRO_E_SHAPEVOL_PARTING_SURF_REF 6011
#define PRO_E_EXT_DEPTH_FROM_REF_TRF 6012
#define PRO_E_EXT_DEPTH_TO_REF_TRF 6013
#define PRO_E_EXT_DEPTH_FROM_REF_TRF_VAL 6014
#define PRO_E_EXT_DEPTH_TO_REF_TRF_VAL 6015
#define PRO_E_FLEXMOVE_MOVED_COMPS 6016
#define PRO_E_WLDCMB_OPTIONS 6017
#define PRO_E_LATTICE_TYPE 6018
#define PRO_E_LATTICE_PROPAGATION_TYPE 6019
#define PRO_E_LATTICE_GEOM_REP 6020
#define PRO_E_LATTICE_SEED_LOCATION 6021
#define PRO_E_LATTICE_CELL_NUMBER 6022
#define PRO_E_LATTICE_PATCH_OPEN_AREA 6023
#define PRO_E_LATTICE_CELL_TYPE 6024
#define PRO_E_LATTICE_REGULAR_SHAPE 6025
#define PRO_E_LATTICE_X_SCALE 6026
#define PRO_E_LATTICE_Y_SCALE 6027
#define PRO_E_LATTICE_Z_SCALE 6028
#define PRO_E_LATTICE_SKEWING_ANGLE 6029
#define PRO_E_LATTICE_RND_CONCAVE_EDGE 6030
#define PRO_E_LATTICE_ROUND_RADIUS 6031
#define PRO_E_LATTICE_INNER_HORIZ_BEAM 6032
#define PRO_E_LATTICE_INNER_VERT_BEAM 6033
#define PRO_E_LATTICE_OUTER_HORIZ_BEAM 6034
#define PRO_E_LATTICE_OUTER_VERT_BEAM 6035
#define PRO_E_LATTICE_ANGULAR_BEAM 6036
#define PRO_E_LATTICE_BALL_ON_BEAM 6037
#define PRO_E_LATTICE_BALL_DIAMETER 6038
#define PRO_E_LATTICE_RMV_DANGLE_BEAM 6039
#define PRO_E_LATTICE_WALL_THICKNESS 6040
#define PRO_E_LATTICE_ADD_DRAIN_HOLE 6041
#define PRO_E_LATTICE_DRAIN_HOLE_DIAMETE 6042
#define PRO_E_LATTICE_DRAIN_HOLE_LENGTH 6043
#define PRO_E_LATTICE_DRAIN_HOLE_SPACING 6044
#define PRO_E_LATTICE_XSEC_TYPE 6045
#define PRO_E_LATTICE_XSEC_SIZE 6046
#define PRO_E_LATTICE_PROFILE_TYPE 6047
#define PRO_E_LATTICE_PARABOLIC_RADIUS 6048
#define PRO_E_LATTICE_PROFILE_COEFF 6049
#define PRO_E_HLE_UV_PARAM 6050
#define PRO_E_HLE_FT_DIR_REF 6051
#define PRO_E_HLE_FT_DIR_OPT 6052
#define PRO_E_HLE_TOP_CLEARANCE 6053
#define PRO_E_HLE_FOLLOW_AXIS_OPT 6054
#define PRO_E_EDIT_BEND_RELIEF 6055
#define PRO_E_EDIT_BEND_RELIEF_SEL_MODE 6056
#define PRO_E_EDIT_BEND_RELIEF_GEOMS 6057
#define PRO_E_EDIT_BEND_RELIEF_SHAPE 6058
#define PRO_E_EDIT_BEND_RELIEF_TABLE 6059
#define PRO_E_BEND_RELIEF_RMV_SETTINGS 6060
#define PRO_E_BEND_RELIEF_RMV_SIDES 6061
#define PRO_E_BEND_RELIEF_RMV_DEFAULT 6062
#define PRO_E_BEND_RELIEF_RMV_METHOD 6063
#define PRO_E_BEND_RELIEF_RMV_REF_TYPE 6064
#define PRO_E_EDIT_CORNER_RELIEF 6065
#define PRO_E_EDIT_CORNER_RELIEF_SEL_OPT 6066
#define PRO_E_EDIT_CORNER_RELIEF_GEOMS 6067
#define PRO_E_EDIT_CORNER_RELIEF_TABLE 6068
#define PRO_E_EDIT_CORNER_RELEIF_RMV 6069
#define PRO_E_EDIT_CORNER_RELEIF_BOUND 6070
#define PRO_E_LATTICE_CONVERT_SOLID 6071
#define PRO_E_LATTICE_TRIM_BOUNDARY 6072
#define PRO_E_LATTICE_MAX_BEAM_LENGTH 6073
#define PRO_E_LATTICE_MIN_BEAM_LENGTH 6074
#define PRO_E_LATTICE_MESH_TYPE 6075
#define PRO_E_LATTICE_BOUND_TYPE 6076
#define PRO_E_MOLD_INS_REFSRFS_CMP 6077
#define PRO_E_MOLD_INS_CSYS 6078
#define PRO_E_MOLD_INS_SHAPE_OPT 6079
#define PRO_E_MOLD_INS_SIZE_OPT 6080
#define PRO_E_MOLD_INS_OFFSET 6081
#define PRO_E_MOLD_INS_BILLET_OFF_ARR 6082
#define PRO_E_MOLD_INS_BILLET_OFF_SET 6083
#define PRO_E_MOLD_INS_X_POS 6084
#define PRO_E_MOLD_INS_X_NEG 6085
#define PRO_E_MOLD_INS_Y_POS 6086
#define PRO_E_MOLD_INS_Y_NEG 6087
#define PRO_E_MOLD_INS_Z_POS 6088
#define PRO_E_MOLD_INS_Z_NEG 6089
#define PRO_E_MOLD_INS_BAR_OFF_ARR 6090
#define PRO_E_MOLD_INS_BAR_OFF_SET 6091
#define PRO_E_MOLD_INS_DIA_POS 6092
#define PRO_E_MOLD_INS_LEN_POS 6093
#define PRO_E_MOLD_INS_LEN_NEG 6094
#define PRO_E_MOLD_INS_BILLET_SIZ_ARR 6095
#define PRO_E_MOLD_INS_BILLET_SIZ_SET 6096
#define PRO_E_MOLD_INS_X_TOT 6097
#define PRO_E_MOLD_INS_Y_TOT 6098
#define PRO_E_MOLD_INS_Z_TOT 6099
#define PRO_E_MOLD_INS_BAR_SIZ_ARR 6100
#define PRO_E_MOLD_INS_BAR_SIZ_SET 6101
#define PRO_E_MOLD_INS_DIA_TOT 6102
#define PRO_E_MOLD_INS_LEN_TOT 6103
#define PRO_E_MOLD_INS_ROT_ARR 6104
#define PRO_E_MOLD_INS_ROT_SET 6105
#define PRO_E_MOLD_INS_X_ROT 6106
#define PRO_E_MOLD_INS_Y_ROT 6107
#define PRO_E_MOLD_INS_Z_ROT 6108
#define PRO_E_TIEWRAP_LOC_REF 6109
#define PRO_E_TIEWRAP_CABLE_REF 6110
#define PRO_E_TIEWRAP_OPTION 6111
#define PRO_E_TIEWRAP_LIB 6112
#define PRO_E_TIEWRAP_INFO 6113
#define PRO_E_TIEWRAP_DISTANCE 6114
#define PRO_E_TIEWRAP_WIDTH 6115
#define PRO_E_TIEWRAP_LENGTH 6116
#define PRO_E_TIEWRAP_THICK 6117
/* Marker feat */
#define PRO_E_REF_MAIN_SEG 6118
#define PRO_E_REF_MARKER_ALL_SEG 6119
#define PRO_E_MARKER_OPT_COMP 6120
#define PRO_E_OPT_MARKER_OFFSET 6121
#define PRO_E_REF_MARKER_PNT_LOC 6122
#define PRO_E_MARKER_DISTANCE 6123
#define PRO_E_INT_MARKER_END_OFFSET_REF 6124
#define PRO_E_CMP_MARKER_PROP 6125
#define PRO_E_DBL_MARKER_LENGTH 6126
#define PRO_E_MARKERS_THICKNESS 6127
#define PRO_E_DBL_MARKER_EXP 6128
#define PRO_E_DBL_MARKER_REDU 6129
#define PRO_E_ECAD_CUT_OBJ_TYPE 6130
#define PRO_E_ECAD_CUTS_SRF_REF 6131
#define PRO_E_BEND_RELIEF_VERTEX 6132
/* Datum Csys Display Elements */
#define PRO_E_CSYS_NAME_DISPLAY_OPT 6133
#define PRO_E_CSYS_NAME_DISPLAY_PLN 6134
#define PRO_E_CSYS_NAME_DISPLAY_PNT_OFFSET 6135
#define PRO_E_CSYS_NAME_DISPLAY_PNT_OFFSET_X 6136
#define PRO_E_CSYS_NAME_DISPLAY_PNT_OFFSET_Y 6137
#define PRO_E_CSYS_NAME_DISPLAY_PNT_OFFSET_Z 6138
#define PRO_E_CSYS_AXIS_LENGTH 6139
#define PRO_E_CSYS_DISPLAY_ZOOM_DEP_OPT 6140
#define PRO_E_EDIT_CORNER_SEAM 6141
#define PRO_E_EDIT_CORNER_SEAM_SEL_MODE 6142
#define PRO_E_EDIT_CORNER_SEAM_GEOMS 6143
#define PRO_E_REMOVE_CORNER_SEAM 6144
#define PRO_E_EDIT_CORNER_SEAM_SHAPE 6145
#define PRO_E_SMT_EDGE_RIP_GAP 6146
#define PRO_E_EDIT_CORNER_SEAM_TABLE 6147
#define PRO_E_CORNER_SEAM_RMV_SETTINGS 6148
#define PRO_E_EDIT_CORNER_SEAM_RMV_REFS 6149
#define PRO_E_CORNER_SEAM_RMV_FLAT 6150
#define PRO_E_CORNER_SEAM_RMV_BEND_1 6151
#define PRO_E_CORNER_SEAM_RMV_BEND_2 6152
#define PRO_E_CORNER_SEAM_RMV_SIDE_1 6153
#define PRO_E_CORNER_SEAM_RMV_DEFAUT 6154
#define PRO_E_CORNER_SEAM_RMV_METHOD 6155
#define PRO_E_CORNER_SEAM_RMV_SIDE_2 6156
#define PRO_E_CORNER_SEAM_BOUNDARIES 6157
#define PRO_E_SWEEP_3D_CONTAINER 6158
#define PRO_E_SWEEP_2D3D 6159
#define PRO_E_SWEEP_3D_ADJUSTMENTS 6160
#define PRO_E_SWEEP_3D_ADJUSTMENT_HOLDER 6161
#define PRO_E_SWEEP_3D_ADJUSTMENT_VAL 6162
#define PRO_E_SWEEP_3D_USE_START_ADJ_REF 6163
#define PRO_E_SWEEP_3D_USE_END_ADJ_REF 6164
#define PRO_E_SWEEP_3D_ADJUSTMENT_REF_START 6165
#define PRO_E_SWEEP_3D_ADJUSTMENT_REF_END 6166
#define PRO_E_FLXSUBST_METHOD 6167
#define PRO_E_FLXSUBST_CAPLOOPS 6168
#define PRO_E_RM_SURF_AUTO_SPLIT_SRF 6169
#define PRO_E_SHAPEVOL_SURF_FLIP_OPT 6170
#define PRO_E_FLXSUBST_EDGELOOPS 6171
#define PRO_E_LATTICE_KEEP_SHELL 6172
#define PRO_E_LATTICE_THICKNESS 6173
#define PRO_E_LATTICE_SHELL_SIDE 6174
#define PRO_E_TOOL_RS_GEN_GAP_REMOVE 6175
#define PRO_E_TOOL_RS_GEN_ENABLE_CONN 6176
#define PRO_E_TOOL_RS_GEN_ENABLE_ROTATE 6177
#define PRO_E_TOOL_RS_GEN_AUTO_BRAN_EXC 6178
#define PRO_E_ECAD_CUT_OBJ_REF 6179
#define PRO_E_LATTICE_EXCL_SRFS 6180
#define PRO_E_LATTICE_ATTACH_SIDE 6181
#define PRO_E_WELD_IDENT_LINE 6182
#define PRO_E_WELD_IDENT_LINE_POS 6183
#define PRO_E_LATTICE_BNDSRFS_FLIPS 6184
/* non-standard direction elems for geometric force motors (forces/torques) */
#define PRO_E_MOTOR_DIR_MODE 6185
#define PRO_E_MOTOR_VEC_DIR_DATA 6186
#define PRO_E_MOTOR_VEC_DIR_CSYS 6187
#define PRO_E_MOTOR_VEC_DIR_X 6188
#define PRO_E_MOTOR_VEC_DIR_Y 6189
#define PRO_E_MOTOR_VEC_DIR_Z 6190
#define PRO_E_MOTOR_PT_TO_PT_DIR 6191
#define PRO_E_MOTOR_DIR_RELATIVITY 6192
#define PRO_E_SENSOR_MODE 6193
#define PRO_E_SENSOR_DATA_SOURCE 6194
#define PRO_E_LATTICE_MC_SETS 6195
#define PRO_E_LATTICE_MC_SET 6196
#define PRO_E_LATTICE_MC_REFS 6197
#define PRO_E_LATTICE_MC_USE_GLOBAL 6198
#define PRO_E_LATTICE_MC_MAX_VALUE 6199
#define PRO_E_LATTICE_MC_MIN_VALUE 6200
#define PRO_E_EDIT_BEND 6201
#define PRO_E_EDIT_BEND_SEL_MODE 6202
#define PRO_E_EDIT_BEND_GEOMS 6203
#define PRO_E_EDIT_BEND_DEFINITION 6204
#define PRO_E_EDIT_BEND_REMOVE 6205
#define PRO_E_EDIT_BEND_REMOVE_RLF 6206
#define PRO_E_EDIT_BEND_ANCH_BND_APEX 6207
#define PRO_E_EDIT_BEND_OPTS 6208
#define PRO_E_EDIT_BEND_ADJ_COND 6209
#define PRO_E_EDIT_BEND_RCR_BND_RLF 6210
#define PRO_E_EDIT_BEND_BND_RLF_OPTS 6211
#define PRO_E_EDIT_BEND_RCR_CRNR 6212
#define PRO_E_EDIT_BEND_CRNR_RLF_OPTS 6213
#define PRO_E_EDIT_BEND_CRNR_SEAMS_OPTS 6214
#define PRO_E_FUNC_FEATURE_SCHEMA 6215
#define PRO_E_FUNC_FEATURE_ID 6216
#define PRO_E_FUNC_FEATURE_TYPE 6217
#define PRO_E_FUNC_FEATURE_SURFS 6218
#define PRO_E_FUNC_FEATURE_SURF 6219
#define PRO_E_FUNC_FEATURE_ANNOTS 6220
#define PRO_E_FUNC_FEATURE_ANNOT 6221
#define PRO_E_FUNC_FEATURE_ANNOT_ID 6222
#define PRO_E_FUNC_FEATURE_ANNOT_TYPE 6223
#define PRO_E_DRF_AES 6224
#define PRO_E_DRF_AE 6225
#define PRO_E_DRF_AE_ID 6226
#define PRO_E_DRF_AE_TYPE 6227
#define PRO_E_LINKED_FUNC_AES 6228
#define PRO_E_LINKED_FUNC_AE 6229
#define PRO_E_LINKED_FUNC_AE_ID 6230
/* Sensor Feature Elements */
#define PRO_E_SENSOR_PARAMS_ARR 6231
#define PRO_E_SENSOR_PARAM 6232
#define PRO_E_SENSOR_PARAM_VALUE 6233
#define PRO_E_WSTRING_MARKER_DSGNTLBL 6234
/* New mirror reapply transformation */
#define PRO_E_GROUP_REAPPLY_TRF 6235
#define PRO_E_PULL_WALL 6236
#define PRO_E_PULL_WALL_GEOMS 6237
#define PRO_E_PULL_WALL_DEFINITION 6238
#define PRO_E_PULL_WALL_DIST 6239
#define PRO_E_PULL_WALL_EXT_BOUND_SIDES 6240
#define PRO_E_PULL_WALL_CUT_N_FORM_SRF 6241
#define PRO_E_PULL_WALL_DIST_DIR 6242
#define PRO_E_EDIT_BEND_RCR_CRNR_SEAM 6243
#define PRO_E_WELD_OTHER_SIDE_SYMB 6244
#define PRO_E_WELD_NEXT_LEADER_OPT 6245
#define PRO_E_WELD_NEXT_LEADER_REF 6246
/* Motor elements for interaction with series params */
#define PRO_E_MOTOR_TBL_DEPEND_ON_SERIES 6247
#define PRO_E_MOTOR_TBL_SERIES_NAME 6248
#define PRO_E_LATTICE_EXCL_BDY_SRFS 6249
#define PRO_E_LATTICE_MESH_TYPE2 6250
#define PRO_E_LATTICE_Z_ORIENTATION 6251
#define PRO_E_LATTICE_XSEC_SETS 6252
#define PRO_E_LATTICE_XSEC_SET 6253
#define PRO_E_LATTICE_XSEC_REFS 6254
#define PRO_E_LATTICE_XSEC_RANGE 6256
#define PRO_E_LATTICE_XSEC_LOCALSIZE 6257
#define PRO_E_LATTICE_SCALE 6258
#define PRO_E_SMT_FORM_BOUND_REFS 6259
#define PRO_E_SMT_RCG_FORM_AS_ONE 6260
#define PRO_E_TOOL_RS_GEN_SINGLE_MOVE 6261
#define PRO_E_FUNC_AE_NAME 6262
#define PRO_E_LATTICE_XSEC_TAPERED 6263
#define PRO_E_LATTICE_XSEC_FACTOR 6264
#define PRO_E_LATTICE_CUTOFF_SIZE 6265
#define PRO_E_OPT_ATTACH_PIO 6266
#define PRO_E_OPT_ATTACH_RNDCH 6267
#define PRO_E_PRTSPLIT_TRANS_SURF_OPT 6268
#define PRO_E_LATTICE_RMV_FAILED_GEOM 6269
#define PRO_E_WELD_GR_BACK_SIZE 6270
#define PRO_E_WELD_GR_BACK_SIZE_OPT 6271
#define PRO_E_WELD_GR_BACK_SIZE_VAL 6272
#define PRO_E_PAT_MFG_SUB_OUT_COPYCL 6273
#define PRO_E_TMCOMP_PLC_TYPE 6274
#define PRO_E_TMCOMP_PLC_ORIG 6275
#define PRO_E_TMCOMP_SCALE 6276
/* Sensor Feature Element */
#define PRO_E_SENSOR_DISPLAY_PLACE 6277
#define PRO_E_DRAFT_RESTORE_ROUNDS 6278
#define PRO_E_CORNER_RELIEF_ORIENT_REF 6279
#define PRO_E_BEND_RELIEF_LENGTH_TYPE 6280
#define PRO_E_BEND_RELIEF_LENGTH 6281
#define PRO_E_SMT_DRV_ADD_SURF 6282
#define PRO_E_SMT_DRV_EXCL_SURF 6283
#define PRO_E_SMT_ADJACENT_RND_OPTS 6284
#define PRO_E_SMT_KEEP_NOT_CLASS_SURFS 6285
#define PRO_E_LATTICE_INNER_TRUSS_BEAM 6290
#define PRO_E_LATTICE_OUTER_TRUSS_BEAM 6291
#define PRO_E_LATTICE_CELL_PRESET 6292
#define PRO_E_TOOL_MTN_VOL_SLICE_ARR 6293
#define PRO_E_TOOL_MTN_VOL_SLICE 6294
#define PRO_E_TOOL_MTN_VOL_SLICE_IDX 6295
#define PRO_E_TOOL_MTN_VOL_SLICE_TYPE 6296
#define PRO_E_TOOL_MTN_VOL_SLICE_VAL 6297
#define PRO_E_TOOL_MTN_VOL_TPATH_METHOD 6298
#define PRO_E_CRNR_SEAM_CR_RND_CHMF 6299
#define PRO_E_SWEEP_3D_SECTION_CMP 6300
#define PRO_E_SWEEP_3D_SEC_TYPE 6301
#define PRO_E_SWEEP_3D_EXT_SEC 6302
#define PRO_E_SWEEP_3D_Y_DIR_OPT 6303
#define PRO_E_SWEEP_3D_SEC_ORIGIN 6304
#define PRO_E_SWEEP_3D_ORIGIN_OPT 6305
#define PRO_E_DRAFT_EXCL_INN_RND 6306
#define PRO_E_MFG_ROUGH_STOCK_NAME 6307
#define PRO_E_SWEEP_3D_TILT_AXIS_OPT 6308
#define PRO_E_SWEEP_3D_TILT_ANGLE1 6309
#define PRO_E_SWEEP_3D_TILT_ANGLE2 6310
#define PRO_E_SENSOR_NOTE_ID 6311
#define PRO_E_BODY 6314
#define PRO_E_BODY_USE 6315
#define PRO_E_BODY_SELECT 6316
#define PRO_E_TARGET_BODY 6315
#define PRO_E_TOOL_BODIES 6316
#define PRO_E_KEEP_TOOLS 6317
#define PRO_E_SPLIT_BODY_REF 6318
#define PRO_E_SMT_WALL_MERGE_BASE_REF 6319
#define PRO_E_SMT_WALL_MERGE_GEOM_REF 6320
#define PRO_E_HLSWP_HLX_CRV_OPT 6321
#define PRO_E_BODY_USE_OPTS_CB 6322
#define PRO_E_SENSOR_DESC_PARAM_VALUE 6323
#define PRO_E_HOLE_USE_VERTEX 6324
#define PRO_E_TIEWRAP_DSGNTLBL 6325
#define PRO_E_LATTICE_SOURCE_BODY 6326
#define PRO_E_WALL_CORNER_TREATMENT 6331
#define PRO_E_SPLIT_BY_OPTION 6332
#define PRO_E_SPLIT_BODY 6333
#define PRO_E_SPLIT_OUT 6334
#define PRO_E_SPLIT_TOOL_EXTEND_OPT 6335
#define PRO_E_SPLIT_TARGET_BODY 6336
#define PRO_E_SPLIT_BODY_SLICE_OPT 6337
#define PRO_E_SPLIT_VOL_SRFS 6338
#define PRO_E_LATTICE_FORMULA 6339
#define PRO_E_LATTICE_FORMULA_TYPE 6340
#define PRO_E_LATTICE_STOCHASTIC_TYPE 6341
#define PRO_E_LATTICE_STOCHASTIC_CELLSIZE 6342
#define PRO_E_LATTICE_STOCHASTIC_NUMBEROFCELLS 6343
#define PRO_E_LATTICE_STOCHASTIC_NUMBEROFCELLSIZE_TYPE 6344
#define PRO_E_LATTICE_STOCHASTIC_MINBEAMLENGTH 6346
#define PRO_E_LATTICE_STOCHASTIC_MAXBEAMLENGTH 6347
#define PRO_E_LATTICE_STOCHASTIC_MINANGLE 6348
#define PRO_E_LATTICE_STOCHASTIC_ALGORITHM 6349
#define PRO_E_LATTICE_STOCHASTIC 6350
#define PRO_E_LATTICE_CONFORMAL 6352
#define PRO_E_LATTICE_CELL 6353
#define PRO_E_LATTICE_DENSITY 6354
#define PRO_E_LATTICE_BEAM 6355
#define PRO_E_LATTICE_REGION 6356
#define PRO_E_LATTICE_VARIABILITY_TYPE 6357
#define PRO_E_LATTICE_COMP_BODIES 6358
#define PRO_E_LATTICE_STOCHASTIC_RANDSEED 6359
#define PRO_E_LATTICE_TWO_AND_HALF_D 6367
#define PRO_E_LATTICE_CUSTOM 6368
#define PRO_E_LATTICE_TRANSITION 6369
#define PRO_E_LATTICE_SEL_REF_MDL 6370
#define PRO_E_LATTICE_TRANSITION_TYPE 6371
#define PRO_E_LATTICE_TRANSCRITICALANGLE 6372
#define PRO_E_LATTICE_TRANSUNSUPPORTEDDIST 6373
#define PRO_E_LATTICE_TRANSMINANGLE 6374
#define PRO_E_LATTICE_TRANSDISTTOELBOW 6375
#define PRO_E_LATTICE_TRANSCONICALBEAMS 6376
#define PRO_E_LATTICE_TRANSMAXBEAMLEN 6377
#define PRO_E_LATTICE_TRANSMINBEAMLEN 6378
#define PRO_E_LATTICE_ORIENTATION 6379
#define PRO_E_LATTICE_FIXED_SCALE 6380
#define PRO_E_LATTICE_MC_DISTANCE 6381
#define PRO_E_LATTICE_MC_DENSITY 6382
#define PRO_E_LATTICE_MC_CHANGE_RATE 6383
#define PRO_E_LATTICE_VOXEL_ACCURACY 6384
#define PRO_E_LATTICE_FORMULA_WALL_THICKNESS 6385
#define PRO_E_TURN_PROFILE_S_VAL 6412
#define PRO_E_TURN_PROFILE_E_VAL 6413
#define PRO_E_BODY_SLICE_OPT 6414 /* Reserved for internal use */
#define PRO_E_CG_BODY_COLL 6415 /* Reserved for internal use */
#define PRO_E_CONTAIN_SURF_COLL 6416
#define PRO_E_MFG_ADDITIV_PRT_NAME 6417
#define PRO_E_BLD_DIR_REGEN_COMP 6418
#define PRO_E_BLD_DIR_TRAY_REF_COMP 6419
#define PRO_E_BLD_DIR_TRAY_REF 6420
#define PRO_E_BLD_DIR_CRITICAL_ANGLE_COMP 6421
#define PRO_E_BLD_DIR_CRITICAL_ANGLE_VAL 6422
#define PRO_E_BLD_DIR_CRITICAL_ANGLE_COLOR 6423
#define PRO_E_BLD_DIR_SUB_CRITICAL_ANGLE_COMP 6424
#define PRO_E_BLD_DIR_SUB_CRITICAL_ANGLE_VAL 6425
#define PRO_E_BLD_DIR_SUB_CRITICAL_ANGLE_COLOR 6426
#define PRO_E_BLD_DIR_MIN_AREA_COMP 6427
#define PRO_E_BLD_DIR_MIN_AREA_VAL 6428
#define PRO_E_BLD_DIR_MIN_AREA_UNIT_OPT 6429
#define PRO_E_BLD_DIR_EXCL_OBJS_COMP 6430
#define PRO_E_BLD_DIR_EXCL_OBJS_COLOR 6431
#define PRO_E_BLD_DIR_INTERNAL_VOLS_VAL 6432
#define PRO_E_BLD_DIR_OVERHANG_EDGES_COMP 6433
#define PRO_E_BLD_DIR_OVERHANG_EDGES_WIDTH 6434
/* was pre-planned but is not used; PRO_E_BLD_DIR_CRITICAL_ANGLE_COLOR is
used for both critical patches and overhang edges */
#define PRO_E_BLD_DIR_OVERHANG_EDGES_COLOR 6435
#define PRO_E_BLD_DIR_ROT_ANGLES_COMP 6436
#define PRO_E_BLD_DIR_PRECESSION_VAL 6437
#define PRO_E_BLD_DIR_NUTATION_VAL 6438
#define PRO_E_BLD_DIR_SPIN_VAL 6439
#define PRO_E_BLD_DIR_ROT_REF_COMP 6440
#define PRO_E_BLD_DIR_ROT_REF 6441
#define PRO_E_BLD_DIR_OPTIMIZE_COMP 6442
#define PRO_E_BLD_DIR_OPTIMIZE_OPTS 6443
#define PRO_E_BLD_DIR_SAMPLE_COMP 6444
#define PRO_E_BLD_DIR_SAMPLE_OPT 6445
#define PRO_E_BLD_DIR_SAMPLE_QUALITY_VAL 6446
#define PRO_E_BLD_DIR_SAMPLE_STEP_VAL 6447
#define PRO_E_BLD_DIR_SAMPLE_NUM_VAL 6448
#define PRO_E_BLD_DIR_DISP_COMP 6449
#define PRO_E_BLD_DIR_DISP_CRITICAL_VAL 6450
#define PRO_E_BLD_DIR_DISP_SUB_CRITICAL_VAL 6451
#define PRO_E_BLD_DIR_DISP_GEOMETRY_VAL 6452
#define PRO_E_BLD_DIR_DISP_OVERHANG_EDGES_VAL 6453
#define PRO_E_IMP_FEAT_RECR_BODIES_OPT 6454 /* Reserved for internal use */
#define PRO_E_MFG_MULTI_LAYER_ARR 6501
#define PRO_E_MFG_MULTI_LAYER 6502
#define PRO_E_MFG_LAYER_PREV_ID 6503
#define PRO_E_MFG_LAYER_NEXT_ID 6504
#define PRO_E_MFG_LAYER_INDEX_VAL 6505
#define PRO_E_MFG_LAYER_THICKNESS_VAL 6506
#define PRO_E_MFG_LAYER_STEP_OVER_VAL 6507
#define PRO_E_BOOLEAN_TYPE 6508
#define PRO_E_BODY_COPY_REFS 6509 /* Reserved for internal use */
#define PRO_E_BLD_DIR_DISP_EXCL_SRFS_VAL 6510
#define PRO_E_MFG_LAYER_ADD_LYRS_VAL 6601
#define PRO_E_MFG_ADTV_LASER_POWER_VAL 6602
#define PRO_E_MFG_ADTV_POWDER_FEED1_VAL 6603
#define PRO_E_MFG_ADTV_POWDER_FEED2_VAL 6604
#define PRO_E_MFG_ADTV_SHIELDING_GAS_FEED_VAL 6605
#define PRO_E_MFG_ADTV_CONVEYING_GAS_FEED_VAL 6606
#define PRO_E_MFG_ADTV_LASER_ON_DELAY_VAL 6607
#define PRO_E_WELD_SHOW_ALL_AROUND 6608
#define PRO_E_CONTAIN_CURVES_CMP 6609
#define PRO_E_CONTAIN_REF_TYPE 6610
#define PRO_E_SMT_TRIM_FORM_SIDES 6611
#define PRO_E_SMT_CONV_BODY 6612
#define PRO_E_MOLD_SPLIT_TWOVOL_OPT 6615
#define PRO_E_MOLD_SPLIT_TWOVOL_CMP 6616
#define PRO_E_MOLD_SPLIT_FIRST_WSTR 6617
#define PRO_E_MOLD_SPLIT_SECOND_WSTR 6618
#define PRO_E_MFG_BODY_REF_CMP 6619
#define PRO_E_MFG_BODY_ALL_OPT 6620
#define PRO_E_MFG_BODY_REF 6621
#define PRO_E_MCX_POCKETSRF_REF 6622
#define PRO_E_MCX_BNDSRF_REF 6623
#define PRO_E_EXTRNVOL_CSYS_REF 6624
#define PRO_E_EXTRNVOL_POS_XYZ_CMP 6628
#define PRO_E_VOL_POS_XREF 6629
#define PRO_E_VOL_POS_YREF 6630
#define PRO_E_VOL_POS_ZREF 6631
#define PRO_E_EXTRNVOL_NEG_XYZ_CMP 6632
#define PRO_E_VOL_NEG_XREF 6633
#define PRO_E_VOL_NEG_YREF 6634
#define PRO_E_VOL_NEG_ZREF 6635
#define PRO_E_EXTRNVOL_XYZ_ROT_CMP 6636
#define PRO_E_VOL_X_ROT 6637
#define PRO_E_VOL_Y_ROT 6638
#define PRO_E_VOL_Z_ROT 6639
#define PRO_E_CG_FOLLOW_SRF_OPT 6640
#define PRO_E_XSEC_INTERFERENCE_TYPE 6641
#define PRO_E_MIRROR_BODY_ATTACH_OPT 6642
#define PRO_E_MANUFACTURE_SET_ID 6643
#define PRO_E_MANUFACTURE_SET_TYPE 6644
#define PRO_E_DESIGN_OBJECTIVE_ARR 6645
#define PRO_E_DESIGN_OBJECTIVE_COMPOUND 6646
#define PRO_E_DESIGN_OBJECTIVE_ID 6647
#define PRO_E_DESIGN_OBJECTIVE_TYPE 6648
#define PRO_E_DESIGN_OBJECTIVE_FREQ_MAG 6649
#define PRO_E_DESIGN_OBJECTIVE_MAX_DISP_REF 6650
#define PRO_E_DESIGN_OBJECTIVE_MAX_DISP_FLIP 6651
#define PRO_E_DESIGN_OBJECTIVE_DISP_MAG 6652
#define PRO_E_DESIGN_OBJECTIVE_STRESS_MAG 6653
#define PRO_E_DESIGN_OBJECTIVE_STRAIN_MAG 6654
#define PRO_E_DESIGN_OBJECTIVE_MASS_VOL 6655
#define PRO_E_DESIGN_OBJECTIVE_FLOOR 6656
#define PRO_E_DESIGN_OBJECTIVE_CEILING 6657
#define PRO_E_DESIGN_OBJECTIVE_TARGET 6658
#define PRO_E_DESIGN_OBJECTIVE_ROLE 6659
#define PRO_E_DESIGN_OBJECTIVE_OBJ_HOLDER 6660
#define PRO_E_DESIGN_CONSTR_ARR 6661
#define PRO_E_DESIGN_CONSTR_COMPOUND 6662
#define PRO_E_DESIGN_CONSTR_ID 6663
#define PRO_E_DESIGN_CONSTR_TYPE 6664
#define PRO_E_DESIGN_CONSTR_DRAFT_ANGLE 6665
#define PRO_E_DESIGN_CONSTR_ADDIT_ANGLE 6666
#define PRO_E_DESIGN_CONSTR_ADDIT_BRIDGE_LEN 6667
#define PRO_E_DESIGN_CONSTR_MILL_DIAM 6668
#define PRO_E_DESIGN_CONSTR_EXTR_BI_DIR 6669
#define PRO_E_DESIGN_CONSTR_SYMM_OPT 6670
#define PRO_E_DESIGN_CONSTR_SYMM_PLANE 6671
#define PRO_E_DESIGN_OBJECTIVE_MAX_DISP_UOM 6672
#define PRO_E_DESIGN_CONSTR_GEOM_SPREAD 6673
#define PRO_E_DESIGN_CONSTR_MILL_ORIENT_POS_X 6674
#define PRO_E_DESIGN_CONSTR_MILL_ORIENT_NEG_X 6675
#define PRO_E_DESIGN_CONSTR_MILL_ORIENT_POS_Y 6676
#define PRO_E_DESIGN_CONSTR_MILL_ORIENT_NEG_Y 6677
#define PRO_E_DESIGN_CONSTR_MILL_ORIENT_POS_Z 6678
#define PRO_E_DESIGN_CONSTR_MILL_ORIENT_NEG_Z 6679
#define PRO_E_DESIGN_CONSTR_MILL_OPT 6680
#define PRO_E_DESIGN_CONSTR_OBJ_HOLDER 6681
#define PRO_E_GDF_STUDY_ARRAY 6682
#define PRO_E_GDF_STUDY 6683
#define PRO_E_GDF_STUDY_ID 6684
#define PRO_E_GDF_MFG_ID 6685 /* Manufacturing id */
#define PRO_E_GDF_MATERIAL_ID 6686
#define PRO_E_MCX_FILLSRF_REF 6687
#define PRO_E_DSF_CPY_PROPS 6688
#define PRO_E_DSF_CPY_APPEARANCE 6689
#define PRO_E_DSF_CPY_PARAMETERS 6690
#define PRO_E_DSF_CPY_NAMES 6691
#define PRO_E_DSF_CPY_LAYERS 6692
#define PRO_E_DSF_CPY_MATERIALS 6693
#define PRO_E_DSF_CPY_BODY_TYPE 6694
#define PRO_E_MATERIAL_ASSIGN_ARR 6695
#define PRO_E_MATERIAL_ASSIGN_COMPOUND 6696
#define PRO_E_MATERIAL_ASSIGN_OBJ_ID 6697
#define PRO_E_MATERIAL_ASSIGN_MATL_ID 6698
#define PRO_E_MATERIAL_ASSIGN_OBJ_HOLDER 6699
#define PRO_MAIN_SUB_SPINDLE 6700
#define PRO_E_GMRG_CONSTRUCTION_BODIES 6701
#define PRO_E_DESIGN_CONSTR_ADDIT_WALL_THICK 6702
#define PRO_E_MATERIAL_ASSIGN_MATL_ACT 6703
#define PRO_E_DESIGN_OBJECTIVE_MASS_TARGET_UOM 6704
#define PRO_E_DESIGN_CONSTR_WALL_THICK_UOM 6705
#define PRO_E_GDF_TEMPLATE_OPT 6706
#define PRO_E_DESIGN_CONSTR_DRAFT_2D 6707
#define PRO_E_DESIGN_CONSTR_DRAFT_2D_REF 6708
#define PRO_E_MCX_SHRNWRP_INT 6710
#define PRO_E_SMT_MERGE_KEEP_BEND_EDGES 6711
#define PRO_E_MFG_HSM_TILT_AXIS_COMPOUND 6712
#define PRO_E_MFG_TILT_AXIS_OPT 6713
#define PRO_E_MFG_HSM_OUTPUT_FORMAT_OPT 6714
#define PRO_E_MFG_HSM_TILT_POLE_LIMIT_OPT 6715
#define PRO_E_MFG_HSM_TILT_CROSS_LIMIT_OPT 6716
#define PRO_E_MFG_HSM_TILT_ABOUT_AXIS_OPT 6717
#define PRO_E_LATTICE_SIM_STUDY_LOCATION 6719
#define PRO_E_LATTICE_MIN_TARGET_DENSITY 6720
#define PRO_E_LATTICE_AVG_TARGET_DENSITY 6721
#define PRO_E_LATTICE_MAX_TARGET_DENSITY 6722
#define PRO_E_HOLE_SKDP_OPTIONS 6723
#define PRO_E_REF_DEBURR_PRT 6724
#define PRO_E_DEBURR_EDGS_INCL_ALL 6725
#define PRO_E_CRV_TP_GEODESIC 6726
#define PRO_E_5AXIS_HSM_REF_CMP 6727
#define PRO_E_5AXIS_HSM_SLICE_OPT 6728
#define PRO_E_5AXIS_HSM_FLOOR_SURF_COMP 6729
#define PRO_E_5AXIS_HSM_CEILING_SURFACE 6730
#define PRO_E_LATTICE_SIM_DRIVEN_DENSITY_CMP 6731
#define PRO_E_LATTICE_SIM_STUDY_TYPE 6732
#define PRO_E_LATTICE_SIM_STUDIES_ARR 6733
#define PRO_E_LATTICE_SIM_STUDY_CMP 6734
#define PRO_E_LATTICE_SIM_STUDY_WEIGHT 6735
#define PRO_E_DEBURR_STRATEGY_OPT 6736
#define PRO_E_DEBURR_TILTAXIS_OPT 6737
#define PRO_E_DEBURR_TOOL_LEAD_ANG 6738
#define PRO_E_DEBURR_TOOL_TILT_ANG 6739
#define PRO_E_DEBURR_TOOL_MAXTILT_ANG 6740
#define PRO_E_LATTICE_RMV_DANGLE_BEAM_REFS 6741
/* Build Direction's Creo 8.0 enhancements */
#define PRO_E_BLD_DIR_CREATE_BOUND_CURVES 6742
#define PRO_E_BLD_DIR_DOWNSKIN_OPTIM_WEIGHT 6743
#define PRO_E_BLD_DIR_SUPP_VOL_OPTIM_WEIGHT 6744
#define PRO_E_BLD_DIR_SHADOW_OPTIM_WEIGHT 6745
#define PRO_E_BLD_DIR_HEIGHT_OPTIM_WEIGHT 6746
#define PRO_E_WELD_Z1_X_Z2 6747
#define PRO_E_WELD_Z1_LEG_OPT 6748
#define PRO_E_WELD_Z1_LEG_VAL 6749
#define PRO_E_WELD_Z1_LEG_REF 6750
#define PRO_E_WELD_Z2_LEG_OPT 6751
#define PRO_E_WELD_Z2_LEG_VAL 6752
#define PRO_E_WELD_Z2_LEG_REF 6753
#define PRO_E_ECAD_CUT_OBJ_KIND 6754
/* Tapered Hole */
#define PRO_E_HLE_TAPERED_STRT_DIA 6755
#define PRO_E_HLE_TAPERED_STRT_DEPTH 6756
#define PRO_E_HLE_TAPERED_TIP_ANGLE 6757
#define PRO_E_HLE_TAPERED_STRT_DEPTH_OPT 6758
#define PRO_E_DESIGN_OBJECTIVE_FREQ_TARGET_UOM 6759
#define PRO_E_DESIGN_OBJECTIVE_TEMP_TARGET_UOM 6760
#define PRO_E_DESIGN_OBJECTIVE_ENERGY_TARGET_UOM 6761
#define PRO_E_DESIGN_OBJECTIVE_THERM_TEMP_SCOPE 6762
#define PRO_E_DESIGN_OBJECTIVES_THERM_TEMP_REFS 6763
#define PRO_E_HLE_THRDTOSEL 6764
#define PRO_E_HLE_ADD_TAPERED_TIP_ANGLE 6765
#define PRO_E_SMT_THREE_BEND_CRNR_RELIEF_TYPE 6766
#define PRO_E_SMT_MITER_CUT_GROOVE_TYPE 6767
#define PRO_E_5AXIS_HSM_FLOOR_SURF_FLIP 6768
#define PRO_E_5AXIS_HSM_CEILING_SURF_FLIP 6769
#define PRO_E_COMPOSITE_ZONE_CURVES 6770
/* Tape Junction */
#define PRO_E_TAPEJUNC_LOC_REF 6771
#define PRO_E_TAPEJUNC_SEG_ARR 6772
#define PRO_E_TAPEJUNC_SEG_COMP 6773
#define PRO_E_TAPEJUNC_PNT_LOC 6774
#define PRO_E_TAPEJUNC_LENGTH 6775
#define PRO_E_TAPEJUNC_INFO 6776
#define PRO_E_CFP_REF_POINT 6777
#define PRO_E_CFP_ANGLE 6778
#define PRO_E_CFP_TERMINATION1 6779
#define PRO_E_CFP_TERM1_TYPE 6780
#define PRO_E_CFP_LENGTH1 6781
#define PRO_E_CFP_TERMINATION2 6782
#define PRO_E_CFP_TERM2_TYPE 6783
#define PRO_E_CFP_LENGTH2 6784
#define PRO_E_TAPEJUNC_SPOOL 6786
/* Lattice */
#define PRO_E_LATTICE_STOCH_ALG_TRABECULAR_SHAPE 6787
#define PRO_E_WELD_INTER_NUM_N_PITCH 6788
#define PRO_E_DESIGN_CONSTR_MIN_RADIUS 6789
#define PRO_E_DESIGN_CONSTR_SYMM_TYPE 6790
#define PRO_E_DESIGN_CONSTR_SYMM_RADIAL 6791
#define PRO_E_DESIGN_CONSTR_SYMM_INST 6792
#define PRO_E_TAPEJUNC_OVERLAP_FACTOR 6793
#define PRO_E_TAPEJUNC_DEFAULT_LENGTH 6794
#define PRO_E_DESIGN_CONSTR_MIN_RADIUS_UOM 6795
/* Lattice */
#define PRO_E_LATTICE_DENSITY_TYPE 6796
#define PRO_E_MFG_GEODESIC_LEAD_IN_OPT 6797
#define PRO_E_MFG_GEODESIC_LEAD_IN_FLIP 6798
#define PRO_E_MFG_GEODESIC_LEAD_OUT_OPT 6799
#define PRO_E_MFG_GEODESIC_LEAD_OUT_FLIP 6800
#define PRO_E_MFG_GEODESIC_SMALL_GAPS_OPT 6801
#define PRO_E_MFG_GEODESIC_LARGE_GAPS_OPT 6802
#define PRO_E_MFG_GEODESIC_GAP_SIZE_INPUT 6803
#define PRO_E_MFG_GEODESIC_GAP_SIZE_UNIT_OPT 6804
#define PRO_E_MFG_GEODESIC_SMALL_MOVES_OPT 6805
#define PRO_E_MFG_GEODESIC_LARGE_MOVES_OPT 6806
#define PRO_E_MFG_GEODESIC_MOVE_SIZE_INPUT 6807
#define PRO_E_MFG_GEODESIC_MOVE_SIZE_UNIT_OPT 6808
#define PRO_E_MFG_GEODESIC_START_INPUT 6809
#define PRO_E_MFG_GEODESIC_START_UNIT_OPT 6810
#define PRO_E_MFG_GEODESIC_END_INPUT 6811
#define PRO_E_MFG_GEODESIC_END_UNIT_OPT 6812
#define PRO_E_MFG_GEODESIC_EXT_TRIM_GAPS 6813
#define PRO_E_GEODESIC_FILL_HOLES_OPT 6814
#define PRO_E_GEODESIC_PATTERN_OPT 6815
#define PRO_E_GEODESIC_INPUT_OPT 6816
#define PRO_E_AXIS_CONTROL_ROTARY_ANG 6817
#define PRO_E_AXIS_CONTROL_LINE_REF 6818
#define PRO_E_MFG_LOWER_GUIDE_CRVS_COMPOUND 6819
#define PRO_E_MFG_GEODESIC_LINEREF_FLIP 6820
#define PRO_E_MFG_CHECK_SRF_CLEARANCE 6821
#define PRO_E_MFG_GEODESIC_LEADRAD_INPUT 6822
#define PRO_E_PLY_ARR 6823
#define PRO_E_PLY_COMPOUND 6824
#define PRO_E_TOOL_MTN_TURN_PROF_S_TANGENT 6825
#define PRO_E_TOOL_MTN_TURN_PROF_E_TANGENT 6826
#define PRO_E_TOOL_MTN_TRIM_OFFSET_VAL 6827
#define PRO_E_TOOL_MTN_TRIM_SPLIT_PTS_CMPD 6828
#define PRO_E_TOOL_MTN_TRIM_SPLIT_PARM_ARR 6829
#define PRO_E_MFG_SPLIT_VAL_COMPUND 6830
#define PRO_E_MFG_SPLIT_PNT_PARAM_VAL 6831
#define PRO_E_TOOL_MTN_OFFSET_VAL_OPT 6832
#define PRO_E_TOOL_MTN_SPLIT_FLIP_DIR 6833
#define PRO_E_DIV_SURF_DIRECTION 6834
#define PRO_E_FLIP_SPLIT_DIR 6835
#define PRO_E_MFG_SPLIT_PNT_OFFSET_VAL 6836
#define PRO_E_MFG_GEODESIC_LEADRAD_UNIT_OPT 6837
#define PRO_E_MFG_ADD_MACH_CHK_SRFS 6838
#define PRO_E_VFA_CONE_SETS 6839
#define PRO_E_VFA_CONE_SET 6840
#define PRO_E_VFA_EYE_PNT 6841
#define PRO_E_VFA_WINDOW 6842
#define PRO_E_VFA_OBSTRUCTION_OPT 6843
#define PRO_E_VFA_OBSTRUCTION_REFS 6844
#define PRO_E_VFA_EXCLUDE_REFS 6845
#define PRO_E_VFA_DISTANCE_OPT 6846
#define PRO_E_VFA_DISTANCE_VAL 6847
#define PRO_E_VFA_DISTANCE_REF 6848
#define PRO_E_TM_SPLIT_PNT_NAME 6849
#define PRO_E_STD_LOOP_COLLECTION_APPL 6850
#define PRO_E_AREA_BOUNDARY 6851
#define PRO_E_AREA_BOUNDARY_OUTER_LOOP 6852
#define PRO_E_AREA_BOUNDARY_LOOPS 6853
#define PRO_E_AREA_BOUNDARY_LOOP 6854
#define PRO_E_CMPST_ZONE_PIECE_ARR 6855
#define PRO_E_CMPST_ZONE_PIECE_COMPOUND 6856
#define PRO_E_CMPST_PLY_PIECE_DEFS 6857
#define PRO_E_MFG_AXIS_DEF_OFFSET_NORMAL 6859
#define PRO_E_CMPST_ZONE_QUANTITY 6860
#define PRO_E_CMPST_PLY_MATERIAL 6861
#define PRO_E_CMPST_PLY_ORIENTATION 6863
#define PRO_E_SRF_OFFS_RBO_RESIDUAL_RAD 6865
#define PRO_E_SRF_OFFS_RBO_SING_PATCH 6866
#define PRO_E_UNIFYSRF_TARGET 6867
#define PRO_E_UNIFYSRF_SRFS 6868
#define PRO_E_UNIFYSRF_UPD_SRF_REF_OPT 6869
#define PRO_E_LOOP_CRV_DOMAIN 6870
/* Lattice */
#define PRO_E_LATTICE_STOCH_DISTORTION 6871
#define PRO_E_CMPST_MAN_PLY_SEED 6872
#define PRO_E_MFG_STOCK_MODEL_REF_FEAT 6875
#define PRO_E_SMT_NEW_BODY_LINKED 6876
#define PRO_E_CMPST_PLY_ZONES 6877
#define PRO_E_CMPST_PLY_ROSETTE 6878
#define PRO_E_XSEC_PLY_SCALE 6879
#define PRO_E_CMPST_DESIGN_SURF_REF 6880
#define PRO_E_CSYS_FEAT_SUB_TYPE 6881
#define PRO_E_CMPST_PFZ_SELTYPE 6882
#define PRO_E_CMPST_PFZ_CUST_SEL 6883
#define PRO_E_CMPST_PFZ_TRANS_ARR 6884
#define PRO_E_CMPST_PFZ_TRANS_CMPND 6885
#define PRO_E_CMPST_PFZ_SET_TYPE 6886
#define PRO_E_CMPST_PFZ_SET_DIR 6887
#define PRO_E_CMPST_PFZ_EXTENT 6888
#define PRO_E_CMPST_PFZ_EXT_OFFSET 6889
#define PRO_E_CMPST_DESIGN_SURF_DIR 6890
#define PRO_E_CMPST_PFZ_HAS_TRANS 6891
#define PRO_E_CMPST_PLY_BASE_QUILT 6892
#define PRO_E_XSEC_HATCH_TYPE 6893
#define PRO_E_CUTLINE_FROM_SURFACES_OPT 6894
#define PRO_E_CUTLINE_DEF_REF_SRF_COMP 6895
#define PRO_E_STD_REF_SURFACE_COLLECTION_APPL 6896
#define PRO_E_CUTLINE_SRF_OFFSET 6897
#define PRO_E_CUTLINE_TYPE_LABEL 6898
#define PRO_E_MOLD_SPLIT_MOLD_VOLUME_KEY 6899
#define PRO_E_HLE_ADD_PARAMETERS 6900
#define PRO_E_CMPST_MAN_PLY_DROP_OFF 6901
#define PRO_E_CMPST_MAN_PLY_NAME 6902
#define PRO_E_CMPST_MAN_PLY_SEQ 6903
#define PRO_E_CMPST_CORE_D1 6904
#define PRO_E_CMPST_CORE_D2 6905
#define PRO_E_CMPST_CORE_HEIGHT 6906
#define PRO_E_CMPST_CORE_SET_ARR 6908
#define PRO_E_CMPST_CORE_SET 6909
#define PRO_E_CMPST_MAN_PLY_CMPND 6910
#define PRO_E_CMPST_MAN_PLY_MTRL 6911
#define PRO_E_CMPST_MAN_PLY_ORNT 6912
#define PRO_E_VFA_INDIRECT_OPT 6914
#define PRO_E_VFA_INDIRECT_MIRROR_CMPND 6915
#define PRO_E_VFA_INDIRECT_MIRROR_REF 6916
#define PRO_E_VFA_INDIRECT_UP_DOWN 6917
#define PRO_E_VFA_INDIRECT_LEFT_RIGHT 6918
#define PRO_E_SPLIT_BODY_TYPE 6919
#define PRO_E_WALL_FINISH_INPUT_OPT 6920
#define PRO_E_WALL_FINISH_PATTERN_OPT 6921
#define PRO_E_REFERENCE_SRFS 6922
#define PRO_E_WALL_FINISH_CEIL_SRFS 6923
#define PRO_E_MFG_WALL_FINISH_GUIDE_CRVS_COMPOUND 6924
#define PRO_E_MFG_WALL_FINISH_LEADRAD_INPUT 6925
#define PRO_E_MFG_WALL_FINISH_LEADRAD_UNIT_OPT 6926
#define PRO_E_MFG_WALL_FINISH_GAP_SIZE_INPUT 6927
#define PRO_E_MFG_WALL_FINISH_GAP_SIZE_UNIT_OPT 6928
#define PRO_E_MFG_WALL_FINISH_LARGE_GAPS_OPT 6929
#define PRO_E_WALL_FINISH_AXIS_PREF_HEIGHT 6930
#define PRO_E_WALL_FINISH_AXIS_MIN_HEIGHT 6931
#define PRO_E_WALL_FINISH_AXIS_MAX_HEIGHT 6932
#define PRO_E_WALL_FINISH_AXIS_LEAD_ANG 6933
#define PRO_E_WALL_FINISH_AXIS_MIN_LEAD 6934
#define PRO_E_WALL_FINISH_AXIS_MAX_LEAD 6935
#define PRO_E_WALL_FINISH_AXIS_MAX_ANG 6936
#define PRO_E_WALL_FINISH_AXIS_MIN_TILT 6937
#define PRO_E_WALL_FINISH_AXIS_MAX_TILT 6938
#define PRO_E_DRAPE_SETS 6939
#define PRO_E_DRAPE_SET 6940
#define PRO_E_DRAPE_PLY_REF 6941
#define PRO_E_DRAPE_SEED_PNT 6942
#define PRO_E_DRAPE_STEP_LENGTH 6943
#define PRO_E_DRAPE_ANGLE 6944
#define PRO_E_DRAPE_POLYLINE_ANG 6945
#define PRO_E_DRAPE_3D 6946
#define PRO_E_REFERENCE_SRFS_FLIP 6950
#define PRO_E_PROP_OPTS 6951
#define PRO_E_PROP_COLOR 6952
#define PRO_E_PROP_REF 6953
#define PRO_E_REFERENCE_SURF_PREV_STEP 6954
#define PRO_E_TILT_ANGLE_RANGE_OPT 6955
#define PRO_E_HOLE_PARAMETERS 6956
#define PRO_E_REFERENCE_SRF_SEL_TYPE 6957
#define PRO_E_CMPST_PLIES_TRANS_TYPE 6958
#define PRO_E_CMPST_PLIES_TRANS_REFS 6959
#define PRO_E_CMPST_PLIES_TRANS_PAT_SETT 6960
#define PRO_E_CMPST_PLIES_TRANS_OFFSET 6961
#define PRO_E_CMPST_PLIES_TRANS_OFFS_ARR 6962
#define PRO_E_CMPST_PLIES_TRANS_ARR_CMPD 6963
#define PRO_E_CMPST_PLIES_TRANS_PLY_ARR 6964
#define PRO_E_CMPST_PLIES_TRANS_OFF_ARR 6965
#define PRO_E_CMPST_PLIES_TRANS_DEBUG 6966
#define PRO_E_MFG_AXIS_DEF_PROJECT_NORMAL 6967
#define PRO_E_WELDJM_COMPS 6968
#define PRO_E_WELDJM_DESC 6969
#define PRO_E_CMPST_PLIES_TRANS_INC_FRST 6970
#define PRO_E_PLIES_REF 6971
#define PRO_E_CMPST_PLY_OVERLAP_OPT 6972
#define PRO_E_CMPST_PLY_OVERLAP_DIM 6973
#define PRO_E_CMPST_PLY_STG_OPT 6974
#define PRO_E_CMPST_PLY_STG_DIM 6975
#define PRO_E_CMPST_PLY_SPLC_FLIP 6976
#define PRO_E_DRAPE_SLIT_CURVES 6977
#define PRO_E_REMOVE_PLY_REF 6979
#define PRO_E_VFA_INDIRECT_AXIS_UD 6980
#define PRO_E_VFA_INDIRECT_AXIS_LR 6981
#define PRO_E_LATTICE_X_ANGLE 6982
#define PRO_E_LATTICE_Y_ANGLE 6983
#define PRO_E_SPLIT_BY_VOL_SIDE_OPT 6984
#define PRO_E_OPT_CREATE_IML 6985
#define PRO_E_OPT_CREATE_DROPOFF 6986
#define PRO_E_OPT_KEEP_SKIRTS 6987
#define PRO_E_SRF_OFFS_RBO_MAINT_BND 6988
#define PRO_E_MFG_TOOL_REF_FOLLOW_HEAD_NUM 6989
#define PRO_E_MFG_FOLLOW_TOOL_REF_ID 6990
#define PRO_E_MFG_FOLLOW_TOOL_REF_POCKET 6991
#define PRO_E_MFG_FOLLOW_TOOL_REF_COMPOUND 6992
#define PRO_E_LATTICE_DIAMOND_CONFIG 6993
#define PRO_E_TOOL_MOTION_ABOVE_4X_AREA_TURNING 6994
#define PRO_E_TOOL_MOTION_BELOW_4X_AREA_TURNING 6995
#define PRO_E_MFG_START2_PNT 6996
#define PRO_E_MFG_END2_PNT 6997
#define PRO_E_MFG_WCELL_ENABLE_GENERIC_CUTCOM_OPT 6998
#define PRO_E_BBOX_TYPE 6999
#define PRO_E_BBOX_INC_REFS 7000
#define PRO_E_BBOX_EXC_REFS 7001
#define PRO_E_BBOX_PARAM 7002
#define PRO_E_BBOX_OFFSET_TYPE 7003
#define PRO_E_BBOX_UNIFIED_OFFSET_VAL 7004
#define PRO_E_BBOX_UPDATE_CONTROL 7005
#define PRO_E_BBOX_EXC_QUILTS 7006
#define PRO_E_BBOX_EXC_CNSTR 7007
#define PRO_E_BBOX_REM_GEOM 7008
#define PRO_E_GENPAT_POINT_REF_PAT 7009
#define PRO_E_CBL_LOC_MAX_DIA 7010
#define PRO_E_BODY_REMOVE_FLIP 7011
#define PRO_E_WELD_SPOT_USE_TOL_OPT 7012
#define PRO_E_WELD_SPOT_PROX_TOL_VAL 7013
#define PRO_E_WELD_SPOT_PNT_SRF 7014
#define PRO_E_ROTARY_ROUGH_STOCK_OPT 7015
#define PRO_E_ROTARY_ROUGH_TOOL_CONE_ANG 7016
#define PRO_E_MFG_ROTARY_ROUGH_LINK_WITHIN_OPT 7017
#define PRO_E_MFG_ROTARY_ROUGH_LINK_BWGROUP_OPT 7018
#define PRO_E_MFG_ROTARY_ROUGH_LINK_BWSLICES_OPT 7019
#define PRO_E_MFG_ROTARY_ROUGH_LINK_BWREGIONS_OPT 7020
#define PRO_E_MW_ROTARY_ROUGH_REF_CMP 7021
#define PRO_E_ROTARY_ROUGH_TOOL_AXIAL_START 7022
#define PRO_E_ROTARY_ROUGH_TOOL_AXIAL_END 7023
#define PRO_E_ROTARY_ROUGH_TOOL_RADIAL_START 7024
#define PRO_E_ROTARY_ROUGH_TOOL_RADIAL_END 7025
#define PRO_E_ROTARY_ROUGH_CONT_FLIP_BTN 7026
#define PRO_E_WELD_SPOT_PNT_DATA 7027
#define PRO_E_WELD_SPOT_PNT_DATA_ITEM 7028
#define PRO_E_WELD_SPOT_PNT 7029
#define PRO_E_INHERIT_LATTICE_PARAMS 7030
#define PRO_E_MERGING_LATTICE_ARR 7031
#define PRO_E_MERGING_LATTICE_CMPD 7032
#define PRO_E_MERGING_LATTICE_REF 7033
#define PRO_E_REF_ROTARY_ROUGH_WP 7034
#define PRO_E_LATTICE_STOCHASTIC_PORESIZE 7035
#define PRO_E_CRV_PROJ_ALLOW_PNT_OPT 7036
#define PRO_E_CMPST_PLIES_TRANS_PLY_REF_ARR 7037
#define PRO_E_REMOVE_PLY_TYPE 7038
#define PRO_E_CNFMLCLNG_REFSRFS_CMP 7040
#define PRO_E_CNFMLCLNG_SRFS_OFFSET 7041
#define PRO_E_CNFMLCLNG_INLET_REF 7042
#define PRO_E_CNFMLCLNG_OUTLET_REF 7043
#define PRO_E_CNFMLCLNG_CNTRBORE_CMP 7044
#define PRO_E_CNFMLCLNG_CNTRBORE_OPT 7045
#define PRO_E_CNFMLCLNG_CNTRBORE_DIA 7046
#define PRO_E_CNFMLCLNG_CNTRBORE_DEPTH 7047
#define PRO_E_CNFMLCLNG_SECTION_TYPE 7048
#define PRO_E_CNFMLCLNG_SECTION_DIA 7049
#define PRO_E_CNFMLCLNG_TURN_MINRAD 7050
#define PRO_E_CNMLCLNG_CHKSRFS_CMP 7051
#define PRO_E_WELD_USE_JM 7052
#define PRO_E_WELD_JM_REF 7053
#define PRO_E_WELD_SPOT_PNT_REFS 7054
#define PRO_E_WELD_SPOT_PNT_NAME 7055
#define PRO_E_WELD_SPOT_PNT_NAMES 7056
#define PRO_E_EXT_PLY_REF 7057
#define PRO_E_EXTENDED_VAL 7058
#define PRO_E_CNFMLCLNG_CHKWALLTHK_OPT 7059
#define PRO_E_CNFMLCLNG_WALL_MINTHICK 7060
#define PRO_E_CNFMLCLNG_CHNLSTRTGY_OPT 7061
#define PRO_E_CNFMLCLNG_CRVS1_CMP 7062
#define PRO_E_CNFMLCLNG_PROJ_DIR_CMP 7063
#define PRO_E_MFG_ROTARY_FINISH_LINK_LEADRAD_INP 7064
#define PRO_E_MFG_ROTARY_FINISH_LINK_LEADRAD_OPT 7065
#define PRO_E_MFG_ROTARY_FINISH_LINK_LEADLEN_INP 7066
#define PRO_E_MFG_ROTARY_FINISH_LINK_LEADLEN_OPT 7067
#define PRO_E_MFG_ROTARY_FINISH_LINK_LEADINOUT_OPT 7068
#define PRO_E_CMPST_MAN_PLY_TYPE 7069
#define PRO_E_CMPST_MAN_PLY_ZONES 7070
#define PRO_E_WELD_CONNECTION 7071
#define PRO_E_CMPST_EXT_PLY_REF 7072
#define PRO_E_CMPST_EXT_RM_CMPND 7073
#define PRO_E_CMPST_EXT_NEW_CMPND 7074
#define PRO_E_MFGPTM_PREC_VAL 7075
#define PRO_E_CMPST_EBC_CHANGED_PLY 7076
#define PRO_E_MFG_TRIM_RETR_PLN 7077
#define PRO_E_TAPERED_LATTICE_BEAM 7078
#define PRO_E_CMPST_ANLS_REF_PNT 7079
#define PRO_E_CMPST_ANLS_FLIP_ORDER 7080
#define PRO_E_CMPST_ANLS_ADD_ANNOT_NOTE 7081
#define PRO_E_CMPST_ANLS_DSP_LIST_OBJS 7082
#define PRO_E_CMPST_ANLS_DSP_NUM_OBJS 7083
#define PRO_E_CMPST_ANLS_DISP_TOTAL_THN 7084
#define PRO_E_SW_COPY_TYPE 7086
#define PRO_E_SW_MERGE_OPTIONS 7087
#define PRO_E_CBL_ENV_RT_BNDL 7089
#define PRO_E_CBL_ENV_ROUTE 7090
#define PRO_E_CBL_ENV_GROUP 7091
#define PRO_E_STACKBUILDER_DLG_STACKS 7092
#define PRO_E_STACKBUILDER_DLG_STACK 7093
#define PRO_E_STACKBUILDER_DLG_DEFINITIONS 7094
#define PRO_E_STACKBUILDER_DLG_DEFINITION 7095
#define PRO_E_STACKBUILDER_DLG_MATERIAL 7096
#define PRO_E_STACKBUILDER_DLG_ORIENT 7097
#define PRO_E_PLIES_FROM_ZONES_STACKS 7098
#define PRO_E_PLIES_FROM_ZONES_STACK 7099
#define PRO_E_PLIES_FROM_ZONES_RECIPE 7100
#define PRO_E_PLIES_FROM_ZONES_LAMINATE_ZONE 7101
#define PRO_E_PLIES_FROM_ZONES_ROSETTE 7102
#define PRO_E_DRAPE_CURED_THICK 7103
#define PRO_E_DTMREF_CONTEXT 7104
#define PRO_E_CBL_LOC_CSYS_DIR 7105
#define PRO_E_DRAPE_REFINEMENT 7106
/* Maximum limit for elements that are hashed for quick retrieval.
This value need not be changed when new elements are added for
ODUI 19 */
#define MAX_ELEM_HASH 1250
/* Reserved RTFEAT elem ids */
#define PRO_E_RTFEAT_OPT_ELEMS 30000
#define PRO_E_RTFEAT_INT_ELEMS 30050
#define PRO_E_RTFEAT_DBL_ELEMS 30100
#define PRO_E_RTFEAT_DBL_ELEM_1 30101
#define PRO_E_RTFEAT_DBL_ELEM_2 30102
#define PRO_E_RTFEAT_DBL_ELEM_3 30103
#define PRO_E_RTFEAT_DBL_ELEM_4 30104
#define PRO_E_RTFEAT_DBL_ELEM_5 30105
#define PRO_E_RTFEAT_DBL_ELEM_6 30106
#define PRO_E_RTFEAT_DBL_ELEM_7 30107
#define PRO_E_RTFEAT_DBL_ELEM_8 30108
#define PRO_E_RTFEAT_DBL_ELEM_9 30109
#define PRO_E_RTFEAT_DBL_ELEM_10 30110
#define PRO_E_RTFEAT_WCH_ELEMS 30150
#define PRO_E_RTFEAT_CMP_ELEMS 30200
#define PRO_E_RTFEAT_ARR_ELEMS 30250
#define PRO_E_RTFEAT_REF_ELEMS 30300
#define PRO_E_RTFEAT_REF_ELEM_1 30301
#define PRO_E_RTFEAT_REF_ELEM_2 30302
#define PRO_E_RTFEAT_REF_ELEM_3 30303
#define PRO_E_RTFEAT_REF_ELEM_4 30304
#define PRO_E_RTFEAT_REF_ELEM_5 30305
#define PRO_E_RTFEAT_REF_ELEM_6 30306
#define PRO_E_RTFEAT_REF_ELEM_7 30307
#define PRO_E_RTFEAT_REF_ELEM_8 30308
#define PRO_E_RTFEAT_REF_ELEM_9 30309
#define PRO_E_RTFEAT_REF_ELEM_10 30310
#define RTFEAT_ELEMS_PER_TYPE 50
/*
********** B E W A R E ******************************
THESE VALUES MUST BE THE SAME ACROSS ALL PROE VERSIONS
******************************************************
*/
/*****************************************************************************/
#include <ProToolkitErrors.h>
#include <ProSizeConst.h>
PRO_BEGIN_C_DECLS
extern ProError ProElemIdStringGet(ProElemId elem_id, ProCharLine name);
/*
Purpose: Obtains the name of the element id
Input Arguments:
elem_id - The element id.
Output Arguments:
name - The name of element id.
Return Values:
PRO_TK_NO_ERROR - The function succeeded.
PRO_TK_BAD_INPUTS - One or more input arguments was invalid.
PRO_TK_E_NOT_FOUND - The given element id was not found.
*/
PRO_END_C_DECLS
#endif /* PROELEMIDH */